1. Вовед
Thank you for choosing the WSDCAM Motorcycle TPMS (Tire Pressure Monitoring System). This device is designed to enhance your riding safety by providing real-time monitoring of your motorcycle's tire pressure and temperature. With its advanced features and robust design, you can ride with greater confidence and peace of mind.
2. Клучни карактеристики
- Следење во реално време: Displays motorcycle tire data, including temperature and pressure, in real-time.
- 7 режими на аларм: Includes high-pressure, low-pressure, high-temperature, fast air leakage, sensor data loss, sensor low battery, and receiver low power alarms.
- Advanced Smart Chip: Quickly and effectively senses tire conditions, providing accurate and timely alerts for abnormal tire pressure. Strong, interference-free signal for higher stability.
- Автоматско работење: The vibrator automatically enters working state when driving. The monitor automatically enters dormant and standby state when the motorcycle stops for a static period.
- Intelligent Charging Design: Features magnetic charging for quick and convenient power replenishment. The magnetic design is also waterproof and dustproof.
- IP67 водоотпорен: Designed to withstand rain, mud, and dust, ensuring reliable performance in various riding conditions.
3. Содржина на пакетот
Проверете го пакувањето за да се осигурате дека сите артикли се присутни:
- TPMS Monitor Unit
- Front Wheel Sensor (A.F.W)
- Rear Wheel Sensor (B.R.W)
- Клуч
- USB кабел за напојување
- Theft-proof Nuts (2x)
- Mounting Bracket (pre-attached to monitor)
4. Поставување и инсталација
4.1 Полнење на мониторот
Before first use, fully charge the TPMS monitor. The unit supports both solar power charging and magnetic USB charging.
- Соларно полнење: Place the monitor in direct sunlight to utilize its integrated solar panel.
- Магнетно USB полнење: Connect the provided USB power cord to the magnetic charging port on the monitor and a USB power source. The magnetic design ensures a secure, waterproof, and dustproof connection.
4.2 Installing the Monitor
The monitor comes with a mounting bracket suitable for motorcycle handlebars.
- Attach the mounting bracket securely to your motorcycle's handlebars.
- Slide the TPMS monitor onto the bracket until it clicks into place.
- Прилагодете го viewing angle for optimal visibility while riding.
4.3 Installing the Sensors
The sensors are labeled 'A.F.W' (Front Wheel) and 'B.R.W' (Rear Wheel). Ensure you install them on the correct tires.
- Unscrew the valve cap from your tire.
- Screw on one of the theft-proof nuts onto the valve stem.
- Screw the corresponding sensor (A.F.W for front, B.R.W for rear) onto the valve stem until it is hand-tight.
- Using the provided spanner, tighten the theft-proof nut against the sensor to secure it and prevent theft.
- Repeat for the other tire.
5. Упатства за работа
5.1 Power On/Off and Automatic Operation
- The monitor will automatically power on and enter working state when it detects vibration (e.g., when you start riding).
- When the motorcycle stops and remains static for approximately ten minutes, the monitor will automatically enter a dormant (sleep) and standby state to conserve power.
5.2 Разбирање на екранот
The LCD color screen provides clear, real-time information about your tires.
| Индикатор | Опис |
|---|---|
| FW (Front Wheel) Pressure | Current pressure of the front tire (e.g., Psi, Bar) |
| FW (Front Wheel) Temperature | Current temperature of the front tire (e.g., °F, °C) |
| RW (Rear Wheel) Pressure | Current pressure of the rear tire (e.g., Psi, Bar) |
| RW (Rear Wheel) Temperature | Current temperature of the rear tire (e.g., °F, °C) |
| Приказ на време | Тековно време |
| Моќен приказ | Battery level of the monitor unit |
5.3 Режими на аларм
The TPMS is equipped with a 7-alarm guardian system to alert you to potential issues:
- Аларм за висок притисок: Alerts when tire pressure exceeds a preset safe limit.
- Аларм за низок притисок: Alerts when tire pressure drops below a preset safe limit.
- Аларм за висока температура: Alerts when tire temperature exceeds a preset safe limit.
- Fast Tire Leak Alarm: Detects and alerts rapidly decreasing tire pressure.
- Sensor Data Loss Alarm: Indicates a sensor is not transmitting data.
- Sensor Low Battery Alarm: Alerts when a tire sensor's battery is low.
- Receiver Low Power Alarm: Alerts when the main monitor unit's battery is low.
Upon an alarm, the monitor will typically emit an audible warning and display the specific alarm icon or message on the screen. Address any alarms promptly for your safety.
6. Одржување
6.1 Чистење
Wipe the monitor and sensors with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners. The IP67 rating ensures the device is waterproof and dustproof, but avoid submerging it for extended periods or using high-pressure water jets directly on the charging port or sensors.
6.2 Грижа за батерии
- Regularly check the monitor's power display and recharge as needed using solar power or the magnetic USB cable.
- If a 'Sensor Low Battery' alarm occurs, replace the battery in the affected sensor immediately. Refer to the sensor's specific instructions for battery replacement.
7 Смена на проблеми
| Проблем | Можна причина | Решение |
|---|---|---|
| Мониторот не се вклучува | Low battery; no vibration detected. | Charge the monitor. Ensure the motorcycle is moving to activate the vibrator sensor. |
| No tire data displayed / Sensor Data Loss Alarm | Sensor not installed correctly; sensor battery low/dead; sensor out of range; interference. | Check sensor installation. Replace sensor battery. Ensure sensors are within range of the monitor. Check for strong electromagnetic interference. |
| Неточни читања | Sensors not calibrated; external factors (extreme temperature changes). | Ensure sensors are correctly paired. Allow time for readings to stabilize after significant temperature changes. Verify tire pressure with a reliable gauge. |
| High/Low Pressure Alarm | Actual tire pressure is outside safe limits. | Immediately check tire pressure and inflate/deflate to recommended levels. Inspect for punctures or leaks. |
| Аларм за висока температура | Tire overheating. | Pull over safely and allow tires to cool down. Check for under-inflation or excessive load. |
8. Спецификации
| Параметар | Вредност |
|---|---|
| Работа Voltage | 3.7-5 V |
| Екран | LCD екран во боја |
| Работна температура | -20℃ ~ +80℃ |
| Температура на складирање | -30℃ ~ +85℃ |
| Работна струја | <7 mA |
| Фреквенција | 433.92 mHz ± 50 kHz |
| Материјал | ABS + компјутер |
| Водоотпорен рејтинг | IPX67 |
9. Кориснички совети
- For optimal solar charging, ensure the monitor's solar panel is exposed to direct sunlight whenever possible, especially when parked.
- Always double-check tire pressure with a manual gauge periodically to confirm the accuracy of the TPMS readings.
- When installing sensors, ensure they are tightened sufficiently to prevent air leaks but do not overtighten, which could damage the valve stem.
- Familiarize yourself with the alarm sounds and display indicators so you can quickly identify and respond to any warnings while riding.
10. Гаранција и поддршка
For warranty information, technical support, or service inquiries, please refer to the seller's contact information or the product listing page where you purchased this device. Keep your proof of purchase for warranty claims.
