1. Вовед
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Growatt SPE ES Series Hybrid Solar Inverter. The Growatt SPE ES series are single-phase hybrid solar inverters designed for residential solar energy systems, offering efficient power conversion and smart energy management. Please read this manual thoroughly before installation and operation.
2. Поставување
2.1 Дебокс и проверка
Carefully unpack the inverter and all accessories. Inspect the contents for any damage. If any components are missing or damaged, contact your supplier immediately.
2.2 Физичка инсталација
The inverter should be mounted in a well-ventilated area, away from direct sunlight and moisture. Ensure sufficient clearance around the unit for proper airflow. The dimensions of the inverter are approximately 550mm (W) x 465mm (H) x 150mm (D), and it weighs 21.5kg. Use appropriate mounting hardware to secure the inverter to a sturdy wall or frame.
2.3 Електрични врски
All electrical connections must be performed by a qualified electrician in accordance with local and national electrical codes. Ensure the inverter is switched off before making any connections.
2.3.1 Архитектура на системот
The Growatt SPE ES inverter integrates into a comprehensive solar energy system, allowing for spontaneous use of generated power and uploading excess power to the grid. The system typically includes solar panels, the inverter, metering devices, the power grid, and local loads. Monitoring can be done via a Cloud Server, Shine Server, or Shine Phone application.
2.3.2 Пристаништа за поврзување
The inverter features various connection ports for different components of your solar system:
- PV1, PV2: Photovoltaic input terminals for solar panels.
- AC влез: Connection for the AC grid supply.
- GEN: Generator input terminal.
- Излез наизменична струја: Connection for household loads.
- Влезен напон: Battery connection terminals.
- CURRENT SHARING: For parallel operation with multiple inverters.
- NC C NO: Сув контакт за надворешна контрола.
- PAR-IN, PAR-OUT: Parallel communication ports.
- BMS, RS485: Communication ports for Battery Management System and other devices.
- WiFi/GPRS, USB: Data communication modules for monitoring.
- INPUT BREAKER: Integrated input breaker for safety.
3. Упатства за работа
3.1 Вклучување/исклучување
- Ensure all electrical connections are secure and correct.
- Turn on the DC input switch (if present) and then the AC input breaker.
- Locate the 'ON/OFF' switch on the inverter and switch it to 'ON'.
- The inverter display will light up, indicating the startup sequence.
- To power off, reverse the sequence: switch the inverter to 'OFF', then turn off the AC input breaker, and finally the DC input switch.
3.2 Приказ и контроли
The inverter features an LCD display and control buttons for monitoring system status and adjusting settings.
- Прикажи: Shows real-time data such as power generation, battery status, and error codes.
- Buttons (ESC, UP, DOWN, ENTER): Се користи за навигација низ менијата и потврдување на изборите на екранот.
3.3 Следење
The Growatt SPE ES inverter supports remote monitoring via WiFi or 4G communication modules. This allows you to track your system's performance using the Shine Phone app or through the Cloud Server/Shine Server platforms.
- Shine Phone App: Download the official Growatt monitoring app to your smartphone for real-time data and alerts.
- Cloud/Shine Server: Access detailed performance reports and historical data through the web портал.
4. Одржување
4.1 Општа нега
- Одржувајте го инверторот чист и без прашина и остатоци. Користете мека, сува крпа за чистење.
- Ensure that the ventilation openings (fans) are not blocked to prevent overheating.
- Regularly check all cable connections for tightness and signs of wear or damage.
4.2 Услови на животната средина
To ensure optimal performance and longevity, the inverter should operate within the specified environmental conditions:
- Опсег на работна температура: -10°C до +50°C
- Релативна влажност: 5% до 95% (некондензирање)
- Висина: <2000м
- Степен на заштита: IP20 (Indoor use recommended, protect from water and dust ingress)
5 Смена на проблеми
If the inverter is not operating as expected, consider the following basic troubleshooting steps:
- Нема напојување/исклучено екран: Check all AC and DC input connections and ensure the ON/OFF switch is in the 'ON' position. Verify power supply from the grid and solar panels.
- Индикаторот за грешка е вклучен: Refer to the inverter's display for specific error codes. Consult the full Growatt user manual (if available) for detailed explanations of fault codes.
- Ниска излезна моќност: Check solar panel connections and ensure they are clean and free from shading. Verify battery charge level if operating in backup mode.
- Проблеми со комуникацијата: Ensure WiFi/4G modules are correctly installed and configured. Check network connectivity.
За сложени проблеми или ако чекорите за решавање проблеми не го решат проблемот, контактирајте ја техничката поддршка.
6. Спецификации
Below are the detailed specifications for the Growatt SPE ES Series Hybrid Solar Inverters:
| Лист со податоци | SPE 8000 ES | SPE 10000 ES | SPE 12000 ES |
|---|---|---|---|
| Input data (DC) | |||
| Max. recommended PV power (for module STC) | 10000 W | 12500 W | 15000 W |
| Макс. DC voltage | 550V | ||
| Започнете волtage | 120V | ||
| MPP voltagд опсег | 60V-480V | ||
| Број на MPP тракери | 2 | ||
| No. of PV strings per MPP tracker | 1 | ||
| Макс. влезна струја по MPP тракер | 27 А | ||
| Output data (AC) | |||
| AC номинална моќност | 8000 W | 10000 W | 12000 W |
| Макс. AC привидна моќност | 8000VA | 10000VA | 12000VA |
| Номинален AC voltage | 230V | ||
| Фреквенција на мрежа со наизменична струја | 50/60 Hz | ||
| Излезна струја | 34.8 А | 43.5 А | 52.2 А |
| Прилагодлив фактор на моќност | 0.8 водечки…0.8 заостануваат | ||
| THDi | < 5% | ||
| Max. conversion efficiency (PV/AC) | 96.5% | ||
| European efficiency @ vnominal (PV/AC) | 95.5% | ||
| Battery data (DC) | |||
| Номинален DC волtage | 48V | ||
| Max charging and discharging current | 190А/200А | 220А/240А | 250А/280А |
| Тип на батерија | Литиум/Олово-киселина | ||
| Backup power (AC) | |||
| AC номинална излезна моќност | 8000 W | 10000 W | 12000 W |
| Номинален AC излез voltage | 230V | ||
| Номинална излезна фреквенција на наизменична струја | 50/60 Hz | ||
| Време на префрлување | <20ms@Single <30ms@Paralle |
||
| Ефикасност | |||
| Peak. efficiency | 96.5% | ||
| европска ефикасност | 95.5% | ||
| Општи податоци | |||
| Димензии (Ш / В / Д) | 550/465/150 мм | ||
| Тежина | 21.5 кг | ||
| Работен температурен опсег | –10°C ... +50°C | ||
| Емисија на бучава (типично) | D 75dB | ||
| Само-потрошувачка | < 75W | ||
| Топологија | Без трансформатор | ||
| Ладење | Вентилатор за еднонасочна струја | ||
| Степен на заштита | IP20 | ||
| Релативна влажност | 5%~95% некондензирачки | ||
| Висина | 2000 милиони фунти | ||
| Комуникација | WiFi/4G | ||
7. Кориснички совети
- Професионална инсталација: Always ensure that the inverter is installed by a certified professional to guarantee safety and compliance with electrical standards.
- Вентилацијата е клучна: Proper airflow around the inverter is crucial for preventing overheating and ensuring long-term performance. Regularly check that vents are clear.
- Редовно следете: Utilize the Growatt monitoring app or web platform to keep track of your system's performance, battery status, and energy production. This helps in early detection of any issues.
- Компатибилност со батерии: Ensure that any connected batteries (Lithium or Lead-acid) are compatible with the inverter's specifications for optimal charging and discharging.
- Паралелно работење: If expanding your system with parallel inverters, ensure correct current sharing and communication connections as per the system architecture.
8. Гаранција и поддршка
For technical support, warranty claims, or any inquiries regarding your Growatt SPE ES Hybrid Solar Inverter, please use the contact information below. It is recommended to have your product model and serial number ready when contacting support.
- WhatsApp: +86 18473951878
- Е-пошта: 17680775530@163.com
