RX MULTI 300-868MHz Tuya Wifi Smart Switch Module 2CH Radio Receiver User Manual

1. Вовед

This manual provides detailed instructions for the installation, operation, and maintenance of the RX MULTI 300-868MHz Tuya Wifi Smart Switch Module. This 2-channel radio receiver is designed to integrate with various garage and gate remote control systems, offering both RF and smart Wi-Fi control capabilities.

The RX MULTI receiver is compatible with a wide range of remote control brands and frequencies (300-868MHz), supporting fixed, learning, and rolling codes. It offers two main versions: a WIFI+RF version for smart home integration (Tuya, Smart Life, Alexa, Google Home) and an RF-only version. Both versions are available for AC/DC 9-30V and AC 85-250V power inputs.

Главните карактеристики вклучуваат:

• Tuya WiFi Smart Garage Door Receiver and Garage Open Close Monitor.
• Compatible with Alexa Echo and Google Home voice control.
• Remote monitoring and control via smartphone app (Tuya or Smart Life).
• Real-time status updates (open/closed).
• Multi-user access authorization.
• Easy installation and connection to existing systems.
• Timer function for scheduling open/close operations.
• Countdown function for automatic closing/opening.

2. Спецификации

3. Содржина на пакетот

По отварањето на пакувањето, проверете дали се присутни сите од следниве елементи:

• RX MULTI приемник
• Мала антена
• Англиски прирачник

4. Водич за поставување

4.1 Список за проверка пред употреба

Before proceeding with installation and setup, please verify the following:

1. Ensure your phone or tablet is connected to a 2.4GHz Wi-Fi network (5GHz Wi-Fi is not supported at the moment).
2. Овозможете Bluetooth на вашиот телефон.
3. For Android devices, ensure the system version is at least 4.0.
4. For Apple devices, ensure access to the App Store.
5. If your wireless router has MAC address filtering enabled, temporarily disable it or add the device's MAC address to the allowed list.

4.2 Преземи апликација

To control your device via Wi-Fi, you need to download the companion app:

1. Пребарај за "Graffiti Intelligence" or "Smart Life" in your device's app store (Apple Store, Google Play, etc.).
2. Alternatively, scan the QR code provided in the physical manual to download the app.
3. If prompted for permission requests during installation, please select 'Allow'.
4. Register an account and log in to the Graffiti Smart APP (or Smart Life APP).

4.3 Device Installation and Wiring

Важно: Ensure the device is in a power-off state before starting any wiring. Live installation is strictly prohibited.

1. Power Input Selector (PIS): This receiver can work at AC/DC 9V~30V or AC 85-250V. It's important to set the PIS according to your power input. If the input is greater than 24V, shorten pins 2 & 3. If the input is less than 24V, shorten pins 1 & 2.
2. Connect the device power supply according to the chosen voltagта верзија.
3. Connect the output terminals (OUT1, OUT2) to your motor or controller as required.
4. Connect the antenna (ANT) for RF functionality.

Image: Wiring diagrams for different voltage versions and their smart home compatibility.

Image: Wiring diagram for motor and controller with the RX-MULTI module.

4.4 Ресетирајте го уредот

If the device is already powered on and the network indicator light is not flashing twice per second, you may need to reset it:

1. Вклучете го уредот.
2. Press and hold the reset button for about 6 seconds until the network indicator light flashes rapidly (2 flashes per second). This indicates the device is in pairing mode.

Image: RX-MULTI module (AC/DC 9-30V) with Tuya logo, highlighting connection points and buttons.

4.5 Add Device to App (Wi-Fi Pairing)

1. Open the Graffiti Smart APP or Smart Life APP.
2. Click the "+" icon to add a device.
3. Wait for a few seconds; the app should prompt you to find the device. Select "Add".
4. Select your 2.4G Wi-Fi network and enter the password.
5. After successful addition, name your device to complete the setup.
6. After completing the wiring and power-on, the device will default to 'off' for incoming calls. You can change this setting (on or off) within the app.

5. Операција

5.1 Користење на уредот

1. When the network indicator blinks steadily, the device is ready for remote control.
2. On the app's home screen, tap the switch icon to turn the device on or off. The app will display the current status in real-time.
3. For Bluetooth control, the switch will automatically connect when the device is disconnected from Wi-Fi.

Image: How to control the switch: Mobile App Control vs RF control.

5.2 App Function Settings

За да пристапите до напредните поставки:

1. Click the device name in the app to enter function settings.
2. You can turn the device on/off or manage multiple devices simultaneously.
3. Достапните поставки вклучуваат:
   • Custom Name/Offline/Reminder/Shared Device/Device Upgrade/Remove Device
   • Timer: Set countdown timing, loop timing, random timing, and jog switch timing.
   • Power on status setting: Define device state (Power off, Power on, Power off memory) when power is restored.
   • Switch type setting: Choose between Shift switch - Flip switch / Off shift switch - status synchronization / Button type switch.
   • Interlock setting: Ensures only one channel is active at a time (others automatically turn off).
   • RF remote control setting (see section 5.3).

Image: Share Function - Share device operation permissions with family.

Image: Scheduling feature in the app for garage door.

5.3 RF Remote Control Settings

The receiver can be paired with up to 400 remote controls.

5.3.1 Pairing a Remote Control

1. OUT1 Channel Coding: Press the learning button S1 once. Then, repeatedly press the button on your remote control. The indicator light will flash, indicating successful learning for the OUT1 channel.
2. OUT2 Channel Coding: Press the learning button S2 once. Then, repeatedly press the button on your remote control. The indicator light will flash, indicating successful learning for the OUT2 channel.

5.3.2 Clearing Remote Control Codes

1. OUT1 Channel Clear Code: Long press the learning button S1 or S2 (any one key). The indicator light flashes, indicating successful code clearing of the OUT1 channel.
2. OUT2 Channel Clear Code: Long press the learning button S1 or S2 (any one key). The indicator light flashes, indicating successful code clearing of the OUT2 channel.

Забелешка: Erasing all data from the memory card: Press and hold either learn button. The LED will start to flash. Keep this button pressed until the LED turns off. All saved data in the memory card will be erased permanently and cannot be recovered.

Image: DIP switch settings for various frequencies and codes.

Слика: Прamples of DIP switch settings for various fixed and rolling codes.

6. Компатибилност

6.1 Compatible Remote Control Models (868MHz)

The RX MULTI receiver is compatible with the following 868MHz remote control models:

• 787005 XT2 868 SLH
• 787009 XT2 868 SLH LR
• 7870091 XT2 868 SLH LR
• 787006 XT4 868 SLH
• 787010 XT4 868 SLH LR
• 7870101 XT4 868 SLH LR

Одрекување: Your original remote control must be the same as pictured and its model must be in this list. We are not responsible for incorrect purchases.

Image: RX-MULTI WIFI+RF module highlighting 868MHz compatibility.

6.2 Frequency Compatibility

The receiver supports a working frequency range of 300-868MHz, including:

• 300 MHz
• 310 MHz
• 315 MHz
• 318 MHz
• 390 MHz
• 433.4 MHz
• 433 MHz
• 433.92 MHz
• 868 MHz
• 868.3 MHz
• 868.8 MHz

It can identify all Fixed codes (e.g., 2262, 2260, 2264, 5326, M1E, M5E), Learning codes (e.g., 1527, 2240, 6P20B, 6P20D), and Rolling codes (e.g., HCS301, HCS300, HCS200, HCS201, HCS100, HCS101).

Важно: This product is not compatible with 433MHz remote controls for the specific models listed above. Please ensure your original remote control model is on our compatibility list.

Image: 433MHz vs 868MHz compatibility chart.

6.3 Remote Control (Optional Accessory)

An optional remote control is available with the following specifications:

• Работна фреквенција: 433 MHz
• Battery: CR2016x2 (3V, not included)
• Материјал: ПВЦ
• Buttons: 2 buttons (A, B)
• Encoding type: 433MHz 1527 Learning Code
• Transfer distance: 20-50m

Забелешка: This remote control can only be used with the receiver. It cannot program the original receiver, copy other remote controls, or be used with other remote controls.

Image: Remote control (433.92MHz Learning Code, CR2016x2 battery not included).

Image: Remote control details (buttons A/B, keyring).

Image: Remote control is NOT FOR CLONING.

7. Апликации

The RX MULTI receiver is versatile and can be used in a wide range of applications, including:

• Garage doors and gate doors (electric gates, swing gates)
• Motorcycles and car alarm products
• Производи за домашна безбедност
• Производи за безжично далечинско управување со краток домет
• Индустриски производи за контрола
• Alarm systems
• Lifting equipment and devices

Image: Remote control applications.

8. Кориснички совети

• If you encounter any difficulties during setup or operation, remember that the device is designed for ease of use. Don't hesitate to refer back to this manual or contact support.
• For optimal Wi-Fi performance, ensure your router is broadcasting a 2.4GHz signal and the device is within range.
• When programming new remotes, carefully follow the steps for pairing and ensure the DIP switches are set correctly for your remote's brand and frequency.

9 Смена на проблеми

9.1 Уредот не се поврзува со Wi-Fi

• Проверете дали вашата Wi-Fi мрежа е 2.4 GHz. Уредот не поддржува мрежи од 5 GHz.
• Check if your phone's Bluetooth is enabled during the pairing process.
• Проверете дали лозинката за Wi-Fi внесена во апликацијата е точна.
• Make sure the device is in pairing mode (network indicator flashing rapidly). If not, perform a reset.
• Temporarily disable MAC address filtering on your router if it's enabled.
• Осигурајте се дека уредот е во опсегот на вашиот Wi-Fi рутер.

9.2 Далечинскиот управувач не работи

• Verify that the remote control model is listed as compatible with the receiver.
• Ensure the remote control has working batteries (if applicable).
• Check the DIP switch settings on the receiver to match the brand and frequency of your remote control.
• Repeat the pairing process carefully, ensuring the indicator light flashes as described.
• If you have multiple remotes, ensure you are not exceeding the maximum capacity of 400 remotes.

9.3 App Control Issues

• Проверете ја вашата интернет конекција.
• Ensure the device is powered on and connected to Wi-Fi.
• Ажурирајте ја апликацијата Tuya Smart или Smart Life на најновата верзија.
• If the app shows an incorrect status, try refreshing the device status in the app.

10. Гаранција и поддршка

For any issues or support needs, please refer to the following:

• Услуга по продажбата: If you encounter any problems with the product during use that prevent it from functioning normally, please contact the seller for assistance. They are committed to helping you resolve your issues.
• Проблеми со квалитетот: If the product's quality itself causes dissatisfaction, the seller will provide a satisfactory resolution within the agreed timeframe.
• Omission or Wrong Delivery: In case of missing parts or incorrect delivery, please contact the seller immediately for a satisfactory solution.

A detailed user manual in PDF format may also be available. Please check the product page or contact the seller for the link to the PDF manual: View Упатство за употреба (PDF)