MXPOKWV 60V 20AH Lead Acid Battery Charger Instruction Manual

1. Вовед

This manual provides instructions for the safe and efficient use of your MXPOKWV 60V 20AH Lead Acid Battery Charger. This smart power charger is designed for 60V lead acid, AGM, and Gel batteries, commonly found in electric cars and toy cars. Please read this manual thoroughly before first use to ensure proper operation and safety.

2. Информации за безбедност

2.1 Општи предупредувања

• This product is intended for 60V lead acid batteries (including AGM and Gel types) ONLY. Do NOT use with Lithium batteries or other battery types.
• Charge indoors in a dry area.
• Keep away from wet surfaces and rain.
• Да се ​​чува подалеку од запаливи материјали.
• Да се ​​чува подалеку од деца.
• Do NOT disassemble the charger.
• Do NOT connect the charger to a battery for more than 12 hours.
• ПРЕДУПРЕДУВАЊЕ: Овој производ може да ве изложи на хемикалии, вклучително и олово, за кое Калифорнија и е познато дека предизвикува рак и вродени дефекти или друга репродуктивна штета. За повеќе информации одете на www.P65Warnings.ca.gov.

2.2 Вградени заштити

• Заштита од краток спој
• Заштита од над струја
• Battery Polarity Reversal Protection

3. Производот завршиview

3.1 Компоненти

• 1 x MXPOKWV 60V 20AH Lead Acid Battery Charger Unit
• 1 x AC Power Cord (with selected plug type: US, EU, UK, or AU)

3.2 Спецификации

3.3 LED индикатори

• Црвено светло: Означува дека батеријата моментално се полни.
• Зелено светло: Укажува дека батеријата е целосно наполнета.

4. Поставување

1. Потврдете го напојувањето: Ensure the charger's input voltage (AC 220V/50Hz) matches your local power supply.
2. Select Plug Type: If applicable, ensure you have the appropriate plug type (US, EU, UK, AU) for your region.
3. Connect AC Cord: Connect the AC power cord to the charger's input port.
4. Identify Battery Connector: Identify the correct output connector for your 60V lead acid battery. The charger features a standard output connector.

5. Операција

1. Поврзете се со батеријата: Carefully connect the charger's output connector to your 60V lead acid battery. Ensure correct polarity. The charger features "Zero Voltage Output On Open Circuit" for safety, meaning it will not output voltage until a battery is connected.
2. Поврзете се на напојување: Приклучете го кабелот за напојување со наизменична струја во соодветен ѕиден штекер.
3. Индикација за полнење: The LED indicator on the charger will turn ЦРВЕНО, signifying that charging is in progress.
4. Индикација за целосно полнење: Откако батеријата е целосно наполнета, LED индикаторот ќе се вклучи ЗЕЛЕНА. The charger features automatic conversion to prevent overcharging.
5. Исклучете го: After the battery is fully charged (green light), first unplug the charger from the wall outlet, then disconnect the charger from the battery.
6. Времетраење на полнење: Typical charging time for 10AH-20AH batteries is 5-8 hours. Avoid leaving the charger connected to the battery for more than 12 hours.

6. Одржување

• Чистење: Keep the charger clean and free from dust. Use a dry cloth for cleaning.
• Складирање: Чувајте го полначот на суво и ладно место кога не е во употреба.
• Инспекција: Periodically inspect the power cord and connectors for any signs of damage. Do not use if damaged.
• Температура: The charger is designed to operate efficiently within a temperature range of -25°C to 55°C, with effective heat dissipation.

7 Смена на проблеми

• Charger not turning on/LED not lighting up:
  • Check if the AC power cord is securely plugged into both the charger and the wall outlet.
  • Осигурајте се дека ѕидниот штекер е функционален.
  • Verify the charger's input voltage (AC 220V/50Hz) matches your power supply.
• Charger LED remains red after extended period:
  • Ensure the battery capacity is within the recommended range (10AH-20AH).
  • Check the battery's condition; a severely discharged or faulty battery may take longer to charge or not charge fully.
  • Не подолго од 12 часа континуирано полнење.
• Charger LED is green but battery is not fully charged:
  • Verify the battery is a 60V lead acid type. This charger is not suitable for other battery chemistries.
  • Check the connections for looseness.

8. Кориснички совети

• Always ensure the charger's plug type matches your region's electrical outlets.
• For optimal battery life, avoid deep discharge of your lead acid batteries.
• The "Zero Voltage Output On Open Circuit" feature means the charger will not output voltage until a battery is connected, enhancing safety.

9. Усогласеност

• This product is CE and CCC certified, indicating compliance with relevant European and Chinese safety standards.
• California Proposition 65 Warning: This product contains lead, a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.

10. Поддршка

For further details, technical assistance, or warranty information, please refer to the official user manual available in PDF format:

Преземи го упатството за користење (PDF)