Вовед
This manual provides essential instructions for the safe installation and proper use of the Lithonia Lighting T21 BL Track Lighting End Feed Connector. This connector is specifically designed to supply power to Juno Lighting Trac-Master track systems.
The T21 BL connector is constructed from extruded aluminum with a thermoplastic insulator, ensuring both durability and reliable electrical performance within your lighting setup.
Информации за безбедност
Please read and understand all instructions before beginning installation. Failure to follow these instructions may result in electric shock, fire, or other hazards.
- ПРЕДУПРЕДУВАЊЕ: Ризик од електричен удар. Исклучете го напојувањето од осигурувачот или прекинувачот пред да го инсталирате или сервисирате.
- Сите електрични приклучоци мора да бидат во согласност со локалните прописи, уредби или Националниот електричен кодекс (NEC).
- Доколку не сте запознаени со електричните инсталации, консултирајте се со квалификуван електричар.
- Do not install in wet locations or areas exposed to direct water spray. This product is intended for indoor use only.
- Осигурајте се дека сите врски се сигурни и правилно изолирани.
Содржина на пакетот
Проверете дали сите компоненти наведени подолу се присутни и неоштетени пред да продолжите со инсталацијата.

The image above displays the Lithonia Lighting T21 BL Track Lighting End Feed Connector and its associated components, including the main connector body, mounting bracket, threaded nipple, and lock nut.
- 1 x T21 BL End Feed Connector Body
- 1 x држач за монтажа
- 1 x Threaded Nipple
- 1 x Lock Nut
- 1 x Ground Screw
Поставување и инсталација
Пред-инсталација
- Turn off power at the circuit breaker or fuse box before starting any electrical work.
- Погрижете се површината за монтирање да биде чиста, сува и структурно стабилна.
- Gather necessary tools: screwdriver, wire strippers, pliers, voltagд тестер.
Чекори за инсталација
- Prepare the Outlet Box: Ensure the electrical outlet box is properly installed and secured to the ceiling or wall.
- Прикачете го држачот за монтирање: Secure the provided mounting bracket to the outlet box using appropriate screws (not included, typically supplied with the outlet box).
- Поврзете жици: Feed the electrical wires from the outlet box through the center hole of the mounting bracket and into the connector body. Connect the supply wires to the corresponding wires on the T21 BL connector (typically black to black, white to white, and ground to ground). Use approved wire connectors.
- Secure Connector Body: Position the T21 BL connector body over the mounting bracket. Use the threaded nipple and lock nut to firmly secure the connector to the mounting bracket and outlet box.
- Connect to Track System: Align the end feed connector with the end of your Juno Lighting Trac-Master track section. Slide the connector firmly into the track until it clicks into place, ensuring a secure electrical and mechanical connection.
- Вратете ја моќноста: Once all connections are secure and the track system is fully assembled, restore power at the circuit breaker.
Забелешка: For optimal safety and performance, it is recommended that installation be performed by a qualified electrician.
Упатства за работа
The Lithonia Lighting T21 BL End Feed Connector is designed for continuous operation once properly installed. It serves as the power supply point for your track lighting system.
- Ensure all track heads or fixtures are correctly inserted and locked into the track system.
- Verify that the circuit breaker supplying power to the track is in the 'ON' position.
- If using a dimmer switch, ensure it is compatible with your track lighting fixtures and is functioning correctly.
Одржување
The T21 BL connector requires minimal maintenance to ensure long-lasting performance.
- Чистење: Periodically wipe the exterior of the connector with a soft, dry cloth to remove dust and debris. Do not use abrasive cleaners or solvents.
- Инспекција: Annually inspect the connector and track system for any signs of damage, loose connections, or wear. If any issues are found, disconnect power and address them immediately.
- Do not attempt to disassemble or modify the connector. This will void the warranty and may create a safety hazard.
Решавање проблеми
If you experience issues with your track lighting system, refer to the following common troubleshooting steps:
- No Power to Track:
- Проверете дали прекинувачот е исклучен. Ресетирајте го доколку е потребно.
- Ensure all wire connections at the outlet box and within the connector are secure.
- Verify that the connector is fully seated and making proper contact with the track.
- Испрекината моќност:
- Inspect for loose connections within the connector or where the connector meets the track.
- Check for any damage to the track or connector that might be causing poor contact.
- Светла што треперат:
- Ensure all track heads are properly installed and making good contact.
- Потврдете дека вкупните ватиtage of your fixtures does not exceed the track system's capacity or the circuit's rating.
If troubleshooting steps do not resolve the issue, contact a qualified electrician or Lithonia Lighting customer support.
Спецификации
| Бренд | Осветлување на Литонија |
| Име на моделот | T21 BL |
| Боја | Црното |
| Материјал | Алуминиум |
| Voltage | 120 волти |
| Тип на инсталација | Површинска монтажа |
| Димензии на производот | 91.88 x 1.38 x 0.68 инчи |
| Тежина на ставката | 1.06 фунти |
| Земја на потекло | КИНА |
| UPC | 661209002013 |
Гаранција
The Lithonia Lighting T21 BL Track Lighting End Feed Connector is backed by a 1-годишна гаранција на производителот од датумот на купување. Оваа гаранција ги покрива дефектите во материјалите и изработката при нормална употреба и сервис.
Please retain your proof of purchase for warranty claims. The warranty does not cover damage resulting from improper installation, misuse, abuse, or unauthorized modifications.
Поддршка
For technical assistance, replacement parts, or to inquire about warranty claims, please contact Lithonia Lighting customer support. Refer to the official Lithonia Lighting webлокација или пакување на производот за најактуелните информации за контакт.
When contacting support, please have your product model number (T21 BL) and proof of purchase readily available.