1. Производот завршиview
The Schlage SP455A3 Kick Down Door Holder is designed to provide a simple and effective method for holding doors open. Constructed from cast aluminum with a bright brass finish, it features a 4-inch arm and a durable rubber foot for secure engagement with the floor surface. This unit is activated and released with a touch of the foot, offering convenient operation.
Figure 1: Schlage SP455A3 Kick Down Door Holder. This image displays the door holder with its 4-inch arm and rubber foot, presented in a bright brass finish.
Клучни карактеристики:
- Едноставна операција: Engage and release the door holder with a foot.
- Издржлива конструкција: Made from cast aluminum for longevity.
- Безбедно задржување: Features a rubber bottom to prevent slipping.
- Optimal Clearance: Designed for doors with a door-to-floor clearance of 2 inches or less.
- Заврши: Bright Brass.
2. Содржина на пакетот
Проверете дали сите компоненти се присутни пред да започнете со инсталацијата.
- Schlage SP455A3 Kick Down Door Holder (1 unit)
- Монтажни хардвери (завртки)
3. Инструкции за инсталација
This door holder is designed for door mount installation. Ensure the door-to-floor clearance is 2 inches or less for proper function.
Потребни алатки:
- Молив
- Мерната лента
- Drill with appropriate drill bit (for pilot holes)
- Шрафцигер (се препорачува глава Филипс)
Чекори за инсталација:
- Одредете ја локацијата за монтирање: Position the door holder on the lower edge of the door, ensuring it is within reach for foot operation and that the rubber foot will make firm contact with the floor when engaged. The ideal location allows the door to open to the desired angle.
- Проверка на дозволата: With the door holder temporarily held in place, ensure that the distance from the bottom of the door to the floor is 2 inches or less. This ensures the rubber foot can effectively engage the floor.
- Обележете ги дупките за завртките: Using a pencil, mark the locations for the mounting screws through the pre-drilled holes on the door holder base.
- Дупчете пилотски дупки: Carefully drill pilot holes at the marked locations. Use a drill bit slightly smaller than the screw diameter to prevent wood splitting.
- Attach Door Holder: Align the door holder with the pilot holes and secure it firmly to the door using the provided mounting screws and a screwdriver. Do not overtighten.
- Тест операција: Once installed, test the door holder by pushing down on the arm with your foot to engage it and lifting it to release.
4. Упатства за работа
The Schlage SP455A3 Kick Down Door Holder is designed for simple, foot-activated use.
- Да се вклучат: With your foot, gently press down on the top of the door holder's arm until the rubber foot makes firm contact with the floor and the door is held in place.
- Да се ослободи: With your foot, gently lift the arm of the door holder upwards. The rubber foot will disengage from the floor, allowing the door to move freely.
5. Одржување
Regular maintenance ensures optimal performance and extends the life of your door holder.
- Чистење: Wipe the metal components with a soft, damp cloth to remove dust and grime. Avoid abrasive cleaners that may damage the finish.
- Rubber Foot Inspection: Periodically check the rubber foot for wear or damage. A worn rubber foot may reduce the holder's ability to grip the floor. Replacement rubber tips may be available from the manufacturer.
- Затегнете ги завртките: If the door holder becomes loose, gently tighten the mounting screws. Do not overtighten.
6 Смена на проблеми
| Проблем | Можна причина | Решение |
|---|---|---|
| Door holder does not hold the door securely. |
|
|
| Door holder feels loose on the door. | Завртките за монтирање се лабави. | Tighten mounting screws with a screwdriver. |
7. Спецификации
| Атрибут | Детал |
|---|---|
| Бренд | РАБОТА |
| Број на модел | 455A3 |
| Тип на монтирање | Монтирање на вратата |
| Материјал | Aluminum, Brass, Rubber |
| Боја/Завршница | Светол месинг |
| Arm Length / Size | 4 inches (4 in H) |
| Door-to-Floor Clearance | 2 инчи или помалку |
| Тежина на ставката | 2.4 унци |
| Димензии на производот | 9.43 x 4.26 x 5.95 инчи |
| Вклучени компоненти | Door holder, Mounting Hardware |
| Потребни се батерии | бр |
8. Гаранција и поддршка
For specific warranty information, please refer to the documentation included with your product or visit the official SCHLAGE website. SCHLAGE products are backed by a commitment to quality and durability.
If you require technical assistance or have questions regarding your Schlage SP455A3 Kick Down Door Holder, please contact SCHLAGE customer support. Contact details are typically available on the manufacturer's webлокација или пакување на производот.
