Ergotron Neo-Flex Single Monitor Stand (Model 33-310-060) Instruction Manual

1. Вовед

This manual provides instructions for the safe and efficient use of your Ergotron Neo-Flex Single Monitor Stand (Model 33-310-060). This desktop stand is designed to support a single monitor up to 27 inches and 16 pounds, compatible with VESA patterns 75x75mm and 100x100mm. It offers ergonomic adjustments including height, pan, tilt, and rotation to enhance your computing experience.

2. Содржина на пакетот

Ве молиме проверете дали сите компоненти се присутни пред да започнете со склопување:

• Основа за држач за монитор
• Adjustable Column with Pivot
• VESA монтажна плоча
• Attachment Hardware (screws, washers, Allen wrench)

Image: All components included with the Neo-Flex Single Monitor Stand.

3. Информации за безбедност

• Ensure the monitor weight and size are within the specified limits (up to 27 inches, 16 lbs).
• Не ги затегнувајте премногу завртките за време на склопувањето.
• Ставете го држачот на стабилна, рамна површина.
• Чувајте ги децата и домашните миленици подалеку од просторот за собирање.

4. Склопување и поставување

4.1 Attaching the Column to the Base

1. Place the monitor stand base on a flat, stable surface.
2. Align the adjustable column with the designated holes on the base.
3. Secure the column to the base using the provided screws and Allen wrench. Ensure it is tightened firmly but do not overtighten.

4.2 Прикачување на VESA плочата на вашиот монитор

1. Carefully lay your monitor face down on a soft, clean surface to prevent scratches.
2. Align the VESA mounting plate with the VESA holes on the back of your monitor (75x75mm or 100x100mm).
3. Use the appropriate screws from the hardware kit to attach the VESA plate securely to the monitor.

4.3 Mounting the Monitor to the Stand

1. With the VESA plate attached to your monitor, carefully lift the monitor.
2. Slide the VESA plate (with monitor) onto the pivot on the adjustable column. Ensure it clicks securely into place.
3. Tighten any hand screws or locking mechanisms on the pivot to secure the monitor.

Слика: Заден дел view of the stand's VESA mounting plate, ready for monitor attachment.

5. Упатства за работа

The Neo-Flex stand allows for easy, fingertip adjustments to optimize your viewудобност

5.1 Прилагодување на висината

• To raise or lower the monitor, gently lift or push down on the monitor. The stand allows for 5 inches (13 cm) of vertical travel without levers or knobs.

5.2 Tilt and Pan Adjustment

• Нежно навалете го мониторот напред или назад за да го постигнете посакуваното viewing angle (up to 30 degrees tilt).
• Swivel the monitor left or right up to 270 degrees for easy screen sharing or collaboration.

5.3 Ротација

• Rotate the monitor 360 degrees to switch between landscape and portrait viewрежими на внесување.

Image: Diagram showing the adjustable height (5 inches/13 cm), tilt (30 degrees), and pan (270 degrees) capabilities.

Слика: напред view of the Ergotron Neo-Flex stand with a monitor, demonstrating its compact design.

6. Управување со кабли

The stand features integrated cable routing to keep your workspace tidy. Route monitor cables through the designated channels on the column to keep them out of sight and prevent clutter.

7. Одржување

• Редовно проверувајте ги сите завртки и врски за да бидете сигурни дека се цврсто затегнати.
• Исчистете го држачот со мека, гamp крпа. Избегнувајте абразивни средства за чистење.
• Do not apply lubricants to the moving parts unless specifically instructed by Ergotron support.

8 Смена на проблеми

8.1 Monitor is not stable or wobbles

• Ensure all assembly screws, especially those connecting the column to the base and the VESA plate to the monitor, are securely tightened.
• Verify that the monitor's weight is within the specified load capacity (6 to 16 lbs).
• Ensure the stand is placed on a flat, stable, and sturdy surface.

8.2 Adjustments are too stiff or too loose

• The stand is designed for fingertip adjustments. If movements are too stiff, check for any overtightened screws. If too loose, ensure all connections are firm.
• Refer to the original product documentation or contact Ergotron support for specific adjustment mechanisms if needed.

9. Спецификации

10. Гаранција и поддршка

Ergotron products are built to last and come with a 3-year warranty. For technical support, troubleshooting assistance, or warranty claims, please visit the official Ergotron webстраницата или директно контактирајте ја нивната служба за корисници. Зачувајте ја сметката за купување за потврда на гаранцијата.