1. Вовед
This manual provides comprehensive instructions for the installation, operation, and maintenance of the DSC BV-300DP Digital Bravo 300 PIR Motion Detector. This device is designed to detect human infrared energy, offering reliable motion detection for security systems.
Image 1: DSC BV-300DP Digital Bravo 300 PIR Motion Detector. This image shows the compact, white casing of the motion detector, designed for discreet wall mounting.
2. Информации за безбедност
- Внимателно прочитајте ги сите упатства пред инсталацијата и работата.
- Инсталацијата треба да ја изврши квалификуван персонал во согласност со локалните електрични прописи.
- Disconnect power before servicing the device.
- Не го изложувајте уредот на екстремни температури, влажност или директна сончева светлина.
- Овој уред е наменет само за внатрешна употреба.
3. Содржина на пакетот
Проверете дали сите компоненти се присутни пред да започнете со инсталацијата:
- DSC BV-300DP Digital Bravo 300 PIR Motion Detector unit
- Хардвер за монтирање (завртки, сидра)
- Упатство за употреба (овој документ)
4. Поставување и инсталација
4.1 Локација за монтирање
Choose a mounting location that provides optimal coverage and avoids false alarms. Consider the following:
- Mount the detector on a solid wall, typically 7.5 feet (2.3 meters) high.
- Avoid aiming the detector directly at heat sources (heaters, direct sunlight, air vents) or moving objects (curtains, pets).
- Ensure the detection pattern covers the desired area without obstructions.
4.2 Поврзување на детекторот
The BV-300DP requires a wired connection to your security system. Refer to your security panel's manual for specific wiring zone connections. Typical connections include:
- Power (V+ and V-): Connect to a regulated 12V DC power supply from the security panel.
- Alarm Output (NC/COM): Connect to a normally closed (NC) zone on your security panel.
- Tamper Switch (TAMP): Connect to a tamper zone if your panel supports it, to detect unauthorized opening of the detector casing.
Слика 2: Внатрешна view of the DSC BV-300DP Motion Detector. This image displays the circuit board and clearly labeled wiring terminals for power, alarm, and tampдруги врски.
4.3 Coverage Pattern and Settings
The BV-300DP offers different detection patterns based on its sensitivity settings. The device features patented Multi-Level Signal Processing (MLSP) for accurate detection.
Image 3: Detection Coverage Patterns. This diagram illustrates the top and side views of the detection range for both 'Normal' (40ft x 40ft) and 'Hostile' (35ft x 35ft) sensitivity settings. The side view shows vertical beam shaping for pet immunity.
The detector includes a jumper for sensitivity adjustment, allowing configuration for 'Normal' or 'Hostile' environments. The 'Hostile' setting typically provides a slightly reduced but more focused coverage (e.g., 35ft x 35ft) to minimize false alarms in challenging conditions, while 'Normal' offers broader coverage (e.g., 40ft x 40ft).
Имунитет за миленичиња: The Vertical Beam Shaping (VBS) feature provides pet immunity for animals up to 60 lbs (27 kg), reducing false alarms caused by pets moving within the protected area.
5. Упатства за работа
Once properly installed and powered, the DSC BV-300DP operates automatically as part of your security system. When the system is armed, the detector monitors its coverage area for infrared energy changes indicative of human movement.
- Откривање: Upon detecting motion, the detector's alarm output will activate, signaling the security panel.
- LED индикатор: A built-in LED typically illuminates during detection, aiding in walk-testing and troubleshooting.
- Digital Signal Analysis: The detector uses digital signal analysis for consistent detection and digital temperature compensation for improved performance across various temperatures.
6. Одржување
To ensure optimal performance of your motion detector, perform the following maintenance tasks:
- Чистење: Periodically wipe the detector's lens and casing with a soft, dry cloth to remove dust and debris. Do not use abrasive cleaners or solvents.
- Тест за одење: Conduct a walk test annually or after any system changes to confirm the detector's coverage and functionality. Walk through the protected area to ensure the LED indicator illuminates and the alarm is triggered.
- Напојување: Ensure a stable 12V DC power supply is maintained.
7 Смена на проблеми
| Проблем | Можна причина | Решение |
|---|---|---|
| Нема детекција |
|
|
| Лажни аларми |
|
|
| Tamper Предупредување |
|
|
8. Спецификации
| Карактеристика | Детал |
|---|---|
| Модел | BV-300DP |
| Бренд | ДСЦ |
| Технологија за откривање | Digital Passive Infrared (PIR) |
| Coverage (Normal) | Up to 40ft x 40ft (12.2m x 12.2m) |
| Coverage (Hostile) | Up to 35ft x 35ft (10.7m x 10.7m) |
| Имунитет на домашни миленици | Up to 60 lbs (27 kg) via Vertical Beam Shaping (VBS) |
| Извор на енергија | Corded Electric (typically 12V DC from security panel) |
| Тип на монтирање | Монтирање на ѕид |
| Боја | Бело |
| Димензии на производот | 3.46 x 14 x 9 inches (approximate, based on packaging) |
| Тежина на ставката | 2.39 унци |
| Компатибилни уреди | Security System, Smart Home Hub, Lighting Control |
9. Информации за гаранцијата
DSC products typically come with a limited manufacturer's warranty. Please refer to the warranty card included with your product or visit the official DSC webстраница за детални услови за гаранција. Зачувајте го доказот за купување за рекламации за гаранција.
10. Техничка поддршка
For technical assistance, troubleshooting beyond this manual, or product inquiries, please contact DSC customer support. Contact information can typically be found on the manufacturer's webлокација или пакување на производот.
Note: Always consult a qualified security professional for complex installations or system integrations.
