Вовед
The CHAMBERLAIN Clicker Keyless Entry KLIK2U-P2 provides convenient, secure, and keyless access to your garage or gate. This universal wireless keypad is designed for broad compatibility with most garage door openers manufactured after 1993 that utilize photoelectric sensors.
This manual provides detailed instructions for setting up, operating, and maintaining your KLIK2U-P2 keypad.
Важни безбедносни информации
- Photo-Eye Sensors: The Original Clicker Universal Wireless Keypad by Chamberlain is intended for use with residential door openers manufactured after 1993 that use photoelectric sensors. Any garage door opener that does not have these sensors installed and working should be replaced.
- Расчистување: Ensure all children, pets, or items are completely clear of the garage door before proceeding with the programming process or operating the door.
- Висина на инсталација: Install the keypad out of reach of children, at a minimum height of 5 feet (1.5 meters) or 60 inches above the floor.
- Door Path: Mount the keypad out of the path of the moving garage door, but within sight of it.
- Cover Clearance: 4 inches of clearance is needed for the cover to be able to fully open.
Компатибилност
The KLIK2U-P2 keypad offers universal frequency recognition, identifying over 90% of all garage door openers installed in North America. It is compatible with major brands and code types, including:
- Billion code 390 MHz
- Security+ 390 MHz
- Security+ 315 MHz
- Безбедност + 2.0
- Linear MegaCode 318 MHz
- Genie Intellicode 390 MHz and 315MHz
- Stanley SecureCode 310 MHz
Refer to the programming section for specific instructions based on your garage door opener's learn button color or DIP switch type.
Image: Packaging highlighting compatibility with major brands and different learn button types (Orange/Red, Purple, Green, Yellow).
Поставување и програмирање
Setting up your KLIK2U-P2 keypad involves programming a personal identification number (PIN) and syncing it with your garage door opener. The process is wireless and typically takes seconds.
1. Identify Your Garage Door Opener Type
Locate the "Learn" button on your garage door opener. Note its color, as this determines the programming steps. Alternatively, some older openers use DIP switches. Refer to your opener's manual if unsure.
Image: Packaging emphasizing wire-free setup and secure encryption.
2. Program the Keypad
- Select a 4-digit PIN: Choose a personal 4-digit code.
- Initiate Programming Mode: Press and hold the '*' and '#' keys together on the keypad until the keypad stops flashing.
- Внесете PIN: Enter your chosen 4-digit PIN, then press '#'.
- Determine Opener ID: Use the instruction manual provided with your keypad to find the corresponding Opener ID based on your garage door opener's brand and learn button color/DIP switch type. Enter this ID, then press '#'.
- Sync with Opener: Press and quickly release the "Smart/Learn" button on your garage door opener. The indicator light on the opener will turn ON.
- Finalize Keypad Sync: Within 30 seconds of the opener's indicator light turning ON, enter your 4-digit PIN on the keypad, then press and hold the '0' key until the garage door opener lights flash or two clicks are heard.
For Genie and Overhead Door units, press the '0' key twice in the final step.
3. Монтирање на тастатурата
The keypad comes with a 9V battery pre-installed and mounting hardware.
- Remove the outer cover by sliding it upwards.
- Unscrew and remove the battery compartment cover and the 9V battery to expose the mounting holes.
- Secure the keypad to a smooth surface using the included screws. Ensure it's at least 5 feet (1.5 meters) above the ground and out of the path of the moving door.
- Reconnect the 9V battery, replace the battery compartment cover, and slide the outer cover back down.
Слика: Заден дел view of the keypad with mounting screw locations and product labels.
Image: Keypad with the protective cover slid open, revealing the numbered buttons.
Официјално видео за поставување
Video: A detailed guide on how to program the Chamberlain universal garage door opener keypad, including identifying opener type and programming steps.
Ракување со тастатурата
To operate your garage door using the keypad:
- Slide the protective cover upwards to reveal the keypad.
- Внесете го вашиот 4-цифрен PIN.
- Press the '0' key. The garage door will activate.
- Slide the protective cover downwards to protect the keypad from elements.
Video: Demonstration of opening and closing a garage door using the Chamberlain Clicker Keyless Entry keypad.
Одржување
Замена на батеријата
The keypad is powered by a 9V battery (included). When the battery is low, the keypad's backlight may dim or the keypad may become unresponsive. To replace the battery:
- Slide the protective cover upwards.
- Одвртете го и извадете го капакот на одделот за батерии.
- Отстранете ја старата 9V батерија и вметнете нова, внимавајќи на правилниот поларитет.
- Вратете го капакот на преградата за батерии и прицврстете го со завртката.
- Slide the protective cover downwards.
Заштита од времето
The sliding cover is designed to protect the keypad from various weather conditions. Ensure the cover is fully closed when not in use to maintain its protective function.
Решавање проблеми
- Тастатурата не реагира: Check the 9V battery. Replace if necessary.
- Opener Does Not Function After Programming:
- Ensure you correctly identified your opener's learn button color or DIP switch settings.
- For DIP switch openers, if the opener does not function, try flipping the DIP switches (if a switch was "on" or "up" in step 3 of programming, flip it "off" or "down" and vice versa) and repeat the programming steps.
- Ensure you are within approximately 2 feet of the garage door opener power head during the syncing step for best results.
- Repeat the entire programming process carefully.
- Проблеми со поврзувањето: For better connectivity, ensure adequate Wi-Fi signal is present in your garage before setup, if your opener relies on Wi-Fi for smart features (though this keypad is wireless, not Wi-Fi dependent, strong signal can help overall system stability).
Спецификации
| Карактеристика | Детал |
|---|---|
| Бренд | КЕМБРЛЕН |
| Број на модел | KLIK2U-P2 |
| Боја | Бело |
| Извор на енергија | Напојува со батерии (вклучена е 1 x 9V батерија) |
| Технологија за поврзување | Безжичен |
| Димензии на ставката (Д x Ш x В) | 1.2 x 2.5 x 5.9 инчи |
| Тежина на ставката | 8 унци (0.23 килограми) |
| Тип на инсталација | Self-Adhesive (Mounting screws also included) |
| Вклучени компоненти | 9V Battery, Instruction Manual |
| UPC | 012381173419 |
Image: Keypad with overlaid dimensions, indicating a length of 11 inches (28 cm).
Гаранција
The CHAMBERLAIN Clicker Keyless Entry KLIK2U-P2 comes with a 1-Year Warranty.
Поддршка
For additional information or assistance, please refer to the instruction manual included with your product. You can also visit the official Chamberlain webстраница за понатамошна поддршка и ресурси.
Службен Webсајт: www.chamberlain.com
