Honeywell 5828 Ademco Wireless Keypad User Manual

Вовед

The Honeywell 5828 Ademco Wireless Keypad is a versatile and essential component of your security system, designed to provide convenient control and status updates. This manual provides comprehensive instructions for the proper installation, operation, and maintenance of your wireless keypad, ensuring optimal performance and reliability.

Please read this manual thoroughly before attempting to install or operate the keypad. Keep it for future reference.

Информации за безбедност

• Извор на енергија: This keypad is primarily battery-powered. An optional AC adapter (sold separately) can be used for continuous power. Ensure correct polarity when inserting batteries.
• Локација: Install the keypad in a dry, indoor location, away from direct sunlight, extreme temperatures, and high humidity. Avoid placing it near large metal objects or electrical interference sources that could affect wireless communication.
• Чистење: Use a soft, dry cloth for cleaning. Do not use liquid or aerosol cleaners, as they may damage the keypad.
• Расклопување: Do not attempt to disassemble or repair the keypad yourself. Refer all servicing to qualified service personnel.

Содржина на пакетот

Проверете дали сите артикли се присутни во вашиот пакет:

• Honeywell 5828 Ademco Wireless Keypad Unit
• Монтажни материјали (завртки, сидра)
• Упатство за употреба (овој документ)
• Note: Batteries and AC power adapter are typically sold separately.

Поставување и инсталација

1. Powering the Keypad

The 5828 keypad can be powered by batteries or an optional AC adapter.

• Инсталација на батерија: Open the battery compartment on the back of the keypad. Insert the required batteries (typically AA, refer to the keypad's battery compartment for exact type and quantity), ensuring correct polarity. The keypad will power on.
• Адаптер за наизменична струја (опционално): If using an AC adapter (e.g., Honeywell K0991, sold separately), connect it to the power jack on the keypad and plug it into a standard wall outlet. Using an AC adapter allows the keypad display to remain active continuously, unlike battery-only operation where the display may go to sleep to conserve power.

2. Монтирање на тастатурата

Choose a suitable location for your keypad, typically near an entry/exit point. Ensure it is within wireless range of your main alarm control panel.

• Монтирање на ѕид:
  1. Carefully detach the back plate from the keypad unit.
  2. Hold the back plate against the wall at the desired height and mark the screw hole locations.
  3. Доколку е потребно, издупчете пилотски дупки и вметнете ѕидни типли.
  4. Прицврстете ја задната плоча на ѕидот со помош на приложените завртки.
  5. Align the keypad unit with the mounted back plate and snap it into place.
• Desk Mounting (Optional): An optional desk mount (P/N 5828DM) is available for tabletop placement. Follow the instructions provided with the desk mount accessory.

Слика 1: Предна страна view of the Honeywell 5828 Ademco Wireless Keypad, showing the display, status indicators, and function buttons.

Figure 2: The Honeywell 5828 Ademco Wireless Keypad installed on a wall, demonstrating typical usage by a person.

Figure 3: The keypad with its numeric key section extended, revealing the full set of input buttons for code entry.

Figure 4: The Honeywell 5828 Ademco Wireless Keypad displayed with the optional desk mount accessory (P/N 5828DM), allowing for tabletop placement.

3. Enrolling the Keypad with Your Alarm System

The 5828 is a wireless device and must be enrolled (programmed) into your compatible Honeywell alarm control panel (e.g., LYNX series) before it can function. Refer to your main alarm system's installation manual for detailed instructions on enrolling wireless devices. This typically involves:

• Putting the control panel into programming mode.
• Entering the keypad's serial number (located on the back of the unit).
• Assigning a zone or device type to the keypad.
• Testing communication between the keypad and the control panel.

Consult a professional installer if you are unsure about the enrollment process.

Упатства за работа

Keypad Layout and Indicators

The 5828 keypad features a clear display, dedicated function buttons, and status indicator lights.

• Екран за прикажување: Shows system status, messages, and prompts.
• ARMED Indicator (Red/Orange LED): Свети кога системот е активиран.
• READY Indicator (Green LED): Illuminates when the system is ready to be armed (all zones are closed).
• Функциски копчиња:
  • ДАЛЕКУ: Arms the system in Away mode (all zones, including interior, are armed).
  • ОСТАНИ: Arms the system in Stay mode (perimeter zones are armed, interior zones are bypassed).
  • POLICE: Panic button for police emergency (requires programming).
  • СТРАНИЦА: Pager function (requires programming).
• Нумеричка тастатура: Used for entering user codes and other numerical inputs.
• MIC / MESSAGE: Microphone and message playback button for voice features (if supported by your main panel).

Вооружување на системот

Before arming, ensure the READY light is illuminated, indicating all protected zones are closed.

• To Arm AWAY:
  1. Внесете го вашиот 4-цифрен кориснички код.
  2. Притиснете го ДАЛЕКУ копче.
  3. The keypad will beep, and the ARMED light will illuminate. An exit delay will begin.
• To Arm STAY:
  1. Внесете го вашиот 4-цифрен кориснички код.
  2. Притиснете го ОСТАНИ копче.
  3. The keypad will beep, and the ARMED light will illuminate.

Разоружување на системот

To disarm the system and silence any alarms:

• Внесете го вашиот 4-цифрен кориснички код.
• The system will disarm, and the ARMED light will turn off.

Проверка на статусот на системот

The display provides real-time system status. If the keypad is battery-powered without an AC adapter, the display may go blank to conserve power. Press any key to wake it up and view статусот.

• ПОДГОТВЕНИ: Означува дека системот е подготвен за вооружување.
• НЕ ПОДГОТВЕН: Indicates one or more zones are open (e.g., a door or window is open). The display will typically show which zone is open.
• ARMED AWAY / ARMED STAY: Indicates the current arming mode.
• AC: Indicates AC power is connected (if using an optional adapter).

Одржување

Замена на батеријата

When the keypad's batteries are low, the system's main control panel will typically indicate a low battery condition for the keypad. Replace batteries promptly to ensure continuous operation.

• Open the battery compartment on the back of the keypad.
• Отстранете ги старите батерии.
• Insert new batteries of the correct type and quantity, observing proper polarity.
• Затворете ја преградата за батерии.
• Фрлете ги старите батерии според локалните прописи.

Чистење

To clean the keypad, gently wipe the surface with a soft, dry, lint-free cloth. Do not use abrasive cleaners, solvents, or spray directly onto the keypad.

Решавање проблеми

Спецификации

Гаранција и поддршка

Информации за гаранцијата: For detailed warranty terms and conditions, please refer to the official Honeywell or Ademco website, or the warranty card included with your product. Warranty periods and coverage may vary.

Техничка поддршка: If you encounter issues not covered in this manual or require further assistance, please contact Honeywell or Ademco customer support. Contact information can typically be found on their official websites or on the product packaging.

You may also find additional resources, FAQs, and software updates on the manufacturer's support pages.