Производот завршиview
The Weiser GA531 T3 SMTK4 MS 6LR1 Troy Entry Knob is a bright brass finished door knob designed for entry doors, providing both security and aesthetic appeal. It features a SmartKey cylinder for enhanced security and easy rekeying.
Слика: Крупен план view of the Weiser Troy Entry Knob, showcasing its bright brass finish and the keyhole of the SmartKey cylinder.
Клучни карактеристики
- Bright brass finish for a classic aesthetic.
- Equipped with a SmartKey cylinder, eliminating traditional pins and springs for enhanced security.
- Allows for easy rekeying in three simple steps using the included rekeying tool.
- Designed to fit standard doors with an adjustable backset of 2-3/8 inches or 2-3/4 inches.
- Part of the Weiser Welcome Home Series, ensuring quality and compatibility.
Содржина на пакетот
Проверете дали сите компоненти се присутни пред да започнете со инсталацијата:
- Troy Entry Knob (Interior and Exterior halves)
- Механизам на бравата
- Ударна плоча
- Завртки за монтирање
- Rekeying Tool
- Клучеви
Водич за инсталација
This section provides general instructions for installing the Weiser Troy Entry Knob. For detailed visual guides, refer to the manufacturer's official installation videos or diagrams.
1. Подгответе ја вратата
Ensure your door is properly bored for a standard door knob installation. The knob fits standard doors and has an adjustable bracket for 2-3/8'' or 2-3/4'' backsets.
2. Инсталирајте ја бравата
Insert the latch into the edge bore hole of the door. Ensure the bevel of the latch bolt faces the door frame. Secure with screws.
3. Install the Knobs
Align the posts of the exterior knob with the holes in the latch. Slide the exterior knob into place. Then, align the interior knob and secure it to the exterior knob using the provided screws.
4. Инсталирајте ја заштитната плоча
On the door frame, align and install the strike plate where the latch bolt will engage when the door is closed. Secure with screws.
Rekeying the Lock (SmartKey Cylinder)
The SmartKey cylinder allows you to rekey your lock to a new key in three easy steps. This is useful if you lose a key or want to match your lock to other SmartKey locks.
- Insert your functioning key fully into the cylinder and turn it 90 degrees clockwise.
- Insert the SmartKey rekeying tool fully into the SmartKey hole. Apply firm pressure and remove the rekeying tool.
- Remove your functioning key. Insert your new key fully into the cylinder and turn it 180 degrees counter-clockwise. Your lock is now rekeyed.
Упатства за работа
The Weiser Troy Entry Knob operates as a standard keyed entry knob. To lock the door from the exterior, use the key. To lock from the interior, rotate the turn-button on the interior knob. To unlock, use the key from the exterior or rotate the turn-button from the interior.
The SmartKey cylinder provides pick-resistance and bump-resistance for enhanced security.
Нега и одржување
To maintain the bright brass finish and ensure smooth operation of your Weiser Troy Entry Knob, follow these guidelines:
- Чистење: Исчистете го копчето со мека, дamp cloth. Avoid abrasive cleaners, solvents, or polishes that may damage the finish.
- Подмачкување: Periodically apply a small amount of graphite lubricant or a silicone-based spray to the keyway to ensure smooth key insertion and turning. Do not use oil-based lubricants as they can attract dirt.
- Инспекција: Regularly check all screws and components for tightness. Tighten any loose screws to prevent wobbling or malfunction.
Решавање проблеми
| Проблем | Можна причина | Решение |
|---|---|---|
| Клучот не се врти или тешко се вметнува. | Debris in keyway, worn key, or lack of lubrication. | Clean keyway with compressed air. Lubricate with graphite. Try a new key if available. |
| Копчето е лабаво или нестабилно. | Завртките за монтирање се лабави. | Затегнете ги завртките за монтирање на внатрешната страна од рачката. |
| Latch bolt does not extend or retract smoothly. | Misalignment, debris, or worn latch. | Check for proper alignment of the latch and strike plate. Clean any debris. Lubricate the latch mechanism. |
| Cannot rekey the lock. | Incorrect key insertion, rekeying tool not fully inserted, or wrong key. | Ensure functioning key is fully inserted and turned 90 degrees. Insert rekeying tool firmly and completely. Use the correct new key. |
Спецификации на производот
| Број на модел | GA531 T3 SMTK4 MS 6LR1 |
| Бренд | Вајзер |
| Материјал | Месинг |
| Боја/Завршница | Brass/Bright Brass (Polished) |
| Тип на заклучување | Key Lock (SmartKey Cylinder) |
| Adjustable Backset | 2-3/8 inches or 2-3/4 inches |
| Тежина на ставката | 1.25 фунти (приближно) |
| Димензии на производот | 4.56 x 2.99 x 8.94 инчи (приближно) |
| Вклучени компоненти | Knob, Lock, Rekeying Tool |
| Посебни карактеристики | Easy to Install, Sturdy |
Гаранција и поддршка
Weiser products are manufactured to the highest standards and are backed by a limited lifetime mechanical and finish warranty to the original residential user. For specific warranty details, claims, or technical support, please refer to the official Weiser webсајт или контактирајте со нивниот оддел за услуги на клиентите.
За понатамошна помош, посетете ја Weiser Lock official webсајт.
