Eiko 48052

Eiko 635B 12V 35W A7275 Incandescent Bulb User Manual

Модел: 48052

1. Производот завршиview

The Eiko 635B is a high-quality 12-volt, 35-watt incandescent light bulb designed for various applications requiring reliable illumination. Featuring a SC Bayonet European (BA20s) base and an SB-35 bulb type, this bulb provides a warm 2700 Kelvin light, ideal for creating a comfortable ambiance. Its robust construction ensures consistent performance and a long service life.

Image of the Eiko 635B 12V 35W A7275 incandescent light bulb.

This image displays the Eiko 635B incandescent light bulb, featuring its clear glass envelope and the BA20s bayonet base. The bulb is designed for 12-volt systems and has a power rating of 35 watts.

2. Информации за безбедност

Please read and understand all safety instructions before installing or operating the Eiko 635B bulb. Failure to do so may result in electric shock, fire, or personal injury.

  • Исклучено: Always ensure the power supply to the fixture is turned off at the circuit breaker or fuse box before installing, removing, or cleaning the bulb.
  • Олади: Allow the bulb to cool completely before handling. Incandescent bulbs can become very hot during operation and cause burns.
  • Точен томtage: Use only with 12-volt power sources. Using incorrect voltage can damage the bulb and the fixture, and pose a fire hazard.
  • Proper Base: Ensure the fixture has a compatible SC Bayonet European (BA20s) base. Do not force the bulb into an incompatible socket.
  • Ракувајте со внимание: Avoid touching the glass envelope of the bulb with bare hands, as oils can reduce bulb life. Use a clean cloth or gloves.
  • Отстранување: Отстранете ги употребените или скршени светилки според локалните прописи.

3. Поставување (инсталација)

Follow these steps to safely install your Eiko 635B incandescent bulb:

  1. Проверете го исклучувањето на напојувањето: Confirm that the power to the light fixture is completely disconnected.
  2. Проверете го прицврстувачот: Ensure the light fixture is clean, dry, and compatible with a BA20s base and 12-volt, 35-watt bulbs.
  3. Распакувајте ја сијалицата: Carefully remove the new Eiko 635B bulb from its packaging.
  4. Вметнете сијалица: Align the pins on the bulb's BA20s base with the slots in the fixture's socket. Gently push the bulb into the socket and twist clockwise until it locks securely into place. Do not overtighten.
  5. Вратете ја моќноста: Откако сијалицата ќе биде безбедно инсталирана, вратете го напојувањето на светилката кај прекинувачот или кутијата со осигурувачи.
  6. Тест: Вклучете го прекинувачот за светла за да потврдите дека сијалицата работи правилно.

4. Упатства за работа

The Eiko 635B incandescent bulb operates simply by applying 12 volts of power to its base. It is designed for immediate full brightness upon activation.

  • Активирање: Turn on the switch connected to the light fixture to illuminate the bulb.
  • Деактивирање: Turn off the switch to extinguish the bulb.
  • Топлина: Be aware that incandescent bulbs generate heat during operation. Ensure adequate ventilation around the fixture.

5. Одржување

Minimal maintenance is required for the Eiko 635B bulb. Regular cleaning and timely replacement will ensure optimal performance.

  • Чистење: Before cleaning, ensure the bulb is cool and the power is off. Gently wipe the glass envelope with a soft, dry, lint-free cloth to remove dust or smudges. Do not use liquid cleaners directly on the bulb.
  • Замена: When the bulb reaches the end of its life, it will cease to illuminate. Follow the installation steps in Section 3 to replace it with a new Eiko 635B (or equivalent) bulb.

6 Смена на проблеми

If your Eiko 635B bulb is not functioning as expected, consider the following common issues and solutions:

ПроблемМожна причинаРешение
Сијалицата не светиNo power to fixture, loose connection, bulb burnt out, incorrect voltage.Check circuit breaker/fuse. Ensure bulb is securely seated. Replace bulb if burnt out. Verify fixture provides 12V.
Bulb flickers or is dimLoose connection, insufficient voltage, faulty fixture wiring.Ensure bulb is tightly screwed/locked. Check voltage supply. Consult a qualified electrician if wiring is suspected.
Сијалицата брзо изгоруваНад-волtage, excessive vibration, frequent on/off cycling, faulty fixture.Потврдете томtage supply is exactly 12V. Ensure bulb is not subject to excessive vibration. Reduce frequent switching if possible. Inspect fixture for issues.

7. Спецификации

АтрибутВредност
БрендЕико
Број на модел48052
Име на производ635B - 12V 35W A7275
Voltage12 волти
Ватtage35 вати
Основа за сијалицаSC Bayonet European (BA20s)
Тип на сијалицаSB-35
Температура на боја2700 Келвини
M.O.L. (Length)2.60 инчи / 66.0 мм.
Тежина на ставката0.01 унци
UPC280342803426

8. Информации за гаранцијата

Eiko products are manufactured to high standards and are typically covered by a limited manufacturer's warranty against defects in materials and workmanship. The specific terms and duration of the warranty may vary. Please refer to the original product packaging or the official Eiko webсајт за детални информации за гаранцијата.

9. Поддршка за корисници

For technical assistance, product inquiries, or warranty claims, please contact Eiko customer support through their official website or the contact information provided on your product packaging. When contacting support, please have your product model number (48052) and any relevant purchase information ready.

Eiko Official Webсајт: www.eiko.com (Забелешка: Ова е резервирано место URL. Refer to actual product documentation for the correct webсајт.)

Поврзани документи - 48052

Предview EIKO LHS1 Series LED Linear High Bay Installation Instructions
Comprehensive installation guide for the EIKO LHS1 Series LED Linear High Bay fixtures, covering overview, safety precautions, mounting options, wiring diagrams, and controls.
Предview EIKO LED T8 Linear Tube Installation Instructions
Comprehensive installation instructions for EIKO LED T8 Type B Linear Tube lights, covering safety precautions, maintenance, and detailed wiring diagrams for retrofitting fluorescent luminaires.
Предview EIKO VL1 Series LED Volumetric Troffer Installation Instructions
Comprehensive installation guide for the EIKO VL1 Series LED Volumetric Troffer, covering overview, safety precautions, installation steps, wiring schematics, and sensor installation. Includes power and CCT selection.
Предview EIKO EEBE Emergency Battery Kit Installation Instructions
Comprehensive installation guide for the EIKO EEBE Emergency Battery Kit, detailing safety precautions, specifications, operation, wiring diagrams, and testing procedures for emergency LED lighting systems.
Предview EIKO Z10 Сензор за затемнување на две нивоа со микробранова печка и упатство за инсталација
Сеопфатно упатство за инсталација на сензорот за затемнување на две нивоа за микробранова EIKO Z10 со фотоќелија, детални спецификации, покриеност на сензорот и информации за усогласеност со FCC за правилно поставување и работа.
Предview EIKO CSX1 Series LED Commercial Strip Premium Installation Instructions
Comprehensive installation guide for the EIKO CSX1 Series LED Commercial Strip Premium fixtures, covering surface mount, chain mount, and optional accessory installations.