Производот завршиview
The Schellenberg 20005 is a white, 2-gang flush-mounted cover frame designed for electrical installations. It serves as a replacement for worn or damaged frame systems, providing a clean and finished look for your switches or timer units.
Главните карактеристики вклучуваат:
- Designed for replacing worn frame systems.
- Features a 2-gang configuration.
- Димензии: 80 x 147 x 8 mm.
- Боја: Бела.

Инструкции за безбедност
Please read these safety instructions carefully before installation and use. Improper installation can lead to electrical shock or damage to the product and connected devices.
- Always disconnect power to the circuit at the main breaker before performing any electrical work.
- Доколку не сте сигурни за кој било дел од процесот на инсталација, консултирајте се со квалификуван електричар.
- Do not use the cover frame if it is damaged.
- Да се чува подалеку од дофат на деца.
- Овој производ е наменет само за внатрешна употреба.
Содржина на производот
The package for the Schellenberg 20005 2-gang flush-mounted cover frame typically includes:
- 1 x Schellenberg 2-gang flush-mounted cover frame (Model 20005)

Поставување и инсталација
The Schellenberg 20005 cover frame is designed for screw-in installation, typically over existing flush-mounted electrical boxes and devices.
- Подготовка: Ensure the power supply to the relevant circuit is turned off at the main breaker. Verify with a voltagд тестер.
- Remove Old Frame (if applicable): Carefully remove the existing cover frame and any associated components.
- Инсталирај уред: Mount your electrical device (e.g., switch, timer) into the flush-mounted box according to its specific instructions. Ensure it is securely fastened.
- Attach Cover Frame: Align the Schellenberg 20005 cover frame over the installed device and the flush-mounted box. The frame is designed to be screwed into place, typically using screws provided with the electrical device or the flush-mounted box itself. Ensure the frame sits flush against the wall.
- Конечна проверка: Once the frame is securely installed, restore power to the circuit. Test the functionality of the installed electrical device.


Операција
The Schellenberg 20005 cover frame is a passive component designed to provide an aesthetic finish for electrical devices. It does not have any operational functions itself. The operation of the electrical device (e.g., switch, timer) installed within the frame is independent of the cover frame.
Одржување
To maintain the appearance of your Schellenberg 20005 cover frame:
- Редовно чистете со мека, дamp крпа.
- Avoid using abrasive cleaners or solvents, as these can damage the surface finish.
- Ensure no liquids enter the electrical components during cleaning.
Решавање проблеми
If you encounter issues with the Schellenberg 20005 cover frame, consider the following:
Frame Does Not Fit Device
The Schellenberg 20005 2-gang cover frame has internal openings measuring approximately 64x64mm per gang. It is important to verify the dimensions of your electrical device before purchase to ensure compatibility.
Забелешка: This frame has been reported by some users as not being compatible with certain Schellenberg timer switches (e.g., models requiring 50x50mm openings) due to differing internal dimensions or the thickness of the device's mounting base. Always check the required frame opening size for your specific device.


Спецификации
| Производител | Шеленберг |
|---|---|
| Број на модел | 20005 |
| Димензии на производот | 8 x 0.8 x 14.7 cm |
| Тежина на ставката | 40 грама |
| Боја | Бело |
| Начин на инсталација | Зашрафување |
| Број на банди | 2 |
| Вклучени компоненти | Рамка за покривање |
Гаранција и поддршка
For information regarding warranty, returns, or technical support, please refer to the official Schellenberg webстраницата или директно контактирајте ја нивната служба за корисници. Зачувајте ја сметката за купување како доказ за купување.
You can visit the Schellenberg store for more products and information: Schellenberg Store





