SKROSS PRO World + USB Travel Adaptor

Вовед

The SKROSS PRO World + USB Travel Adaptor is a compact and versatile solution designed for travelers. It allows you to connect 2-pole and 3-pole devices from various countries to power outlets in over 220 destinations worldwide. This adaptor also features an integrated USB charging port, enabling simultaneous charging of your mobile devices like smartphones and tablets.

Важни безбедносни информации

ПРЕДУПРЕДУВАЊЕ: Овој адаптер не конвертира волуменtage. Ensure your device is compatible with the local voltage before plugging it in. Failure to do so may damage your device or cause injury.

• Do not use with appliances that exceed the adapter's maximum power rating (e.g., 630W at 100V, 1575W at 250V).
• Овој производ е само за внатрешна употреба.
• Да се ​​чува подалеку од дофат на деца.
• Не изложувајте на влага или екстремни температури.
• Не расклопувајте или менувајте го адаптерот.

Производот завршиview

The image displays the SKROSS PRO World + USB Travel Adaptor from multiple angles. On the left, the main adapter unit is shown with its retractable pins. In the center, a view of the universal input socket is visible, along with a label indicating "Adapter does not convert voltage". On the right, the detachable USB charging module is shown with its USB-A and USB-C ports. The SKROSS logo and "Designed in Switzerland" are visible on all components.

The SKROSS PRO World + USB Travel Adaptor consists of a main adapter unit and a detachable USB charging module. The main unit features retractable pins for various international standards and a universal input socket. The USB module provides power for charging USB-powered devices.

Поставување

1. Identify the correct plug: Based on your travel destination, identify the appropriate plug type required for the wall outlet.
2. Extend the pins: Use the sliders on the side of the main adapter unit to extend the correct set of pins for the destination country. Ensure the pins are fully extended and locked into place.
3. Attach USB module (optional): If you need to charge USB devices, attach the USB charging module to the universal input socket of the main adapter unit.

Упатства за работа

Using the Main Adapter Unit:

1. Ensure the correct pins are extended for your destination's wall outlet.
2. Plug the adapter firmly into the wall outlet.
3. Plug your 2-pole or 3-pole device's power cord into the universal input socket on the adapter.
4. Verify that your device is receiving power.

Using the USB Charging Module:

1. Attach the USB charging module to the main adapter unit, or use it independently if it has its own plug (check specific model features).
2. Connect your USB charging cable to the USB port(s) on the module.
3. Connect the other end of the USB cable to your smartphone, tablet, or other USB-powered device.
4. The device should begin charging. The USB port provides up to 2400 mA (2.4A) for efficient charging.

Note: The USB charging module may occupy the main adapter's universal socket, preventing simultaneous use of a traditional plug-in device and USB charging through the same adapter unit. Some configurations allow the USB module to be used separately.

Одржување

• Чистете го адаптерот со сува, мека крпа. Не користете течни средства за чистење или растворувачи.
• Чувајте го адаптерот на ладно и суво место кога не е во употреба.
• Regularly inspect the adapter for any signs of damage, such as frayed wires or cracked casing. Не употребувајте ако е оштетено.
• The adapter contains a replaceable fuse (T 6.3 A). If the adapter stops working, check and replace the fuse if necessary. Refer to the fuse replacement instructions provided with the product packaging.

Решавање проблеми

Уредот не прима струја:

• Ensure the adapter is fully plugged into the wall outlet and your device is fully plugged into the adapter.
• Verify that the wall outlet is active.
• Check if the correct pins are extended for the specific country's outlet.
• Confirm that your device's power requirements do not exceed the adapter's maximum load (e.g., 630W at 100V, 1575W at 250V).
• Check the fuse (T 6.3 A) and replace if blown.

USB device not charging:

• Ensure the USB charging module is securely attached to the main adapter unit (if applicable) and the adapter is plugged into a live outlet.
• Обидете се со друг USB-кабел.
• Ensure your device is compatible with USB charging and its charging requirements are within the 2400 mA output.

Adapter feels loose in the outlet:

• Some older or worn outlets may not provide a tight fit. Ensure the adapter is as secure as possible. If it consistently falls out, try a different outlet.
• The weight of the adapter and connected device can sometimes cause it to sag. Support the adapter if necessary.

Спецификации

Гаранција и поддршка

SKROSS products are designed and manufactured to high quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your product packaging or visit the official SKROSS website. For technical support or inquiries, please contact SKROSS customer service through the contact information provided in your product documentation.

SKROSS stands for thoughtful design, intuitive and easy handling, and compliance with relevant international safety standards.