АПЦ BR700G

APC Back-UPS RS 700 VA Tower UPS (Model BR700G) User Manual

Модел: BR700G | Бренд: APC

1. Вовед

The APC Back-UPS RS 700 VA Tower UPS (Uninterruptible Power Supply) provides reliable battery backup and surge protection for your electronic devices. Designed to safeguard your equipment from power outages, surges, and spikes, this unit ensures continuous operation and protects against data loss. It features a 700VA/450W capacity, offering approximately 3 minutes of full load runtime.

APC Back-UPS RS 700 VA Tower UPS with front panel display showing load, online status, estimated run time, and AVR indicator.

Слика 1: Предна страна view of the APC Back-UPS RS 700 VA Tower UPS. The display shows current load, online status, estimated run time in minutes (e.g., 30 minutes), and AVR (Automatic Voltage Regulation) status. Power and display control buttons are located at the top.

Клучни карактеристики:

2. Поставување

2.1 Отпакување и поставување

Carefully unpack the UPS and inspect it for any shipping damage. Place the UPS in a location that is clean, dry, and away from direct sunlight or excessive heat. Ensure adequate ventilation around the unit. The tower form factor allows for vertical placement.

2.2 Поврзување со напојување

  1. Connect the UPS power cord to a grounded 3-prong outlet. The power cord is approximately 5 feet long, providing flexibility for placement.
  2. Дозволете UPS-от да се полни најмалку 24 часа пред да поврзете критична опрема за да се обезбеди целосен капацитет на батеријата.
  3. Observe the Building Wiring Fault Indicator. If this LED illuminates, it indicates a potential wiring problem in the wall circuit that should be addressed by a qualified electrician.

2.3 Опрема за поврзување

The UPS features both battery-protected and surge-only outlets.

2.4 Data Line Protection

Connect your telephone, network, or coaxial cables through the designated ports on the UPS to protect against surges traveling through these lines.

2.5 USB and Serial Connectivity

For advanced management and monitoring, connect the UPS to your computer using the provided USB or serial cable. Install the appropriate power management software (available from APC's website) to configure settings, monitor power conditions, and perform graceful shutdowns.

2.6 Монтирање на ѕид

The unit can be wall-mounted using the keyhole slots on the back. Ensure the mounting surface is sturdy enough to support the weight of the UPS and that proper fasteners are used.

3. Операција

3.1 Вклучување/исклучување

3.2 LCD Graphics Display

The LCD display provides real-time information about the UPS status, including:

3.3 Автоматски Voltage регулатива (AVR)

The Boost and Trim AVR feature automatically corrects minor voltage fluctuations (sags and surges) in incoming utility power without switching to battery power. This preserves battery life and ensures a stable power supply to your connected devices.

3.4 Напојувањеtagе-одговор

За време на моќ оtage, the UPS automatically switches to battery power, providing uninterrupted power to devices connected to the battery-protected outlets. Audible alarms will sound to notify you of the power event. The estimated run time will be displayed on the LCD.

3.5 Green Mode and Power-Saving Outlets

The Green Mode optimizes efficiency by bypassing internal components when utility power is stable. Power-saving outlets can be configured to automatically turn off connected devices when the master device (e.g., your computer) is turned off or goes into standby, reducing energy consumption.

4. Одржување

4.1 Грижа и замена на батериите

The UPS features user-replaceable and hot-swappable batteries, allowing for replacement without powering down connected equipment.

4.2 Прекинувач што може да се ресетира

In case of an overload, the UPS's resettable circuit breaker may trip. Disconnect non-essential equipment, then press the circuit breaker button to reset it.

4.3 Чистење

Keep the UPS clean and free of dust. Use a dry cloth to wipe the exterior. Do not use liquid cleaners or solvents. Ensure ventilation openings are not obstructed.

5 Смена на проблеми

This section provides solutions to common issues you might encounter with your APC Back-UPS RS 700 VA.

ПроблемМожна причинаРешение
UPS-от не се вклучува.Not connected to utility power; battery not charged; internal fault.Ensure power cord is securely plugged into a live outlet. Allow 24 hours for initial battery charge. If still unresponsive, contact support.
Audible alarm sounds frequently.Overload; battery low/faulty; utility power issues.Reduce connected load. Check LCD for specific alarm codes. Ensure proper ventilation. Perform a self-test.
Building Wiring Fault Indicator is lit.Wiring problem in the wall outlet (e.g., missing ground, reversed polarity).Do not use the outlet. Consult a qualified electrician to inspect and correct the wiring.
Кратко време на работа на батеријата.Батеријата не е целосно наполнета; батеријата е при крајот на животниот век; прекумерно оптоварување.Ensure battery is fully charged. Reduce connected load. Consider replacing the battery if it's old or fails self-test.
UPS not providing power during outage.Devices connected to surge-only outlets; battery disconnected or faulty.Verify critical devices are connected to battery-protected outlets. Check for disconnected battery notification. Replace battery if faulty.

6. Спецификации

7. Гаранција

The APC Back-UPS RS 700 VA Tower UPS (Model BR700G) comes with a 1-годишна гаранција од производителот. This warranty covers defects in materials and workmanship under normal use. For specific terms, conditions, and to initiate a warranty claim, please refer to the official APC warranty documentation or contact APC customer support.

8. Поддршка

For technical assistance, product information, or to purchase replacement parts and accessories, please contact APC customer support or visit their official webсајт.

Поврзани документи - BR700G

Предview APC Back-UPS BR1000G-IN / BR1500G-IN: Упатство за инсталација и работа
Сеопфатно упатство за инсталирање и ракување со непрекинато напојување (UPS) APC Back-UPS BR1000G-IN и BR1500G-IN, кое опфаќа спецификации, поврзувања, карактеристики, решавање проблеми и сервис.
Предview Водич за инсталација и работа на APC Back-UPS Pro BR1000G
Сеопфатен водич за инсталирање и ракување со APC Back-UPS Pro BR1000G, кој опфаќа поставување, карактеристики, безбедност, решавање проблеми и спецификации. Научете како да поврзувате опрема, да управувате со заштедата на енергија и да ги разбирате предупредувањата.
Предview APC Back-UPS BE 450G/550G/650G1 User Manual - Power Protection Guide
Comprehensive user manual for APC Back-UPS models BE450G, BE550G, and BE650G1. Learn about safety, specifications, installation, operation, troubleshooting, and warranty for these Uninterruptible Power Supply (UPS) units.
Предview Упатство за користење на APC Back-UPS BN450MNW: Инсталација, работа и решавање проблеми
Сеопфатно упатство за корисникот за APC Back-UPS BN450MNW, кое опфаќа безбедност, инсталација, спецификации, работа, индикатори за статус, решавање проблеми и информации за гаранцијата. Научете како да ја заштитите вашата опрема од прекин на електричната енергија.tagес и пренапони.
Предview Упатство за користење на APC Back-UPS BX Series: Инсталација, работа и решавање проблеми
Сеопфатно упатство за корисникот за APC Back-UPS BX серијата (500VA до 2200VA) од Schneider Electric, кое опфаќа безбедносни упатства, опис на производот, оперативни карактеристики, инсталација, решавање проблеми, сервис и информации за гаранција.
Предview Упатство за користење на APC Back-UPS BX Series: Заштита од напојување и пренапон за компјутери
Сеопфатно упатство за корисникот за APC Back-UPS BX серијата (500VA до 2200VA). Дознајте повеќе за безбедноста, инсталацијата, карактеристиките, спецификациите, индикаторите за статус и решавањето проблеми за сигурна заштита од напојување.