Орбита 94162

Orbit 94162 Buddy Digital Automatic Watering Timer

Модел: 94162

Вовед

The Orbit 94162 Buddy Digital Automatic Watering Timer is designed to automate garden watering tasks, providing consistent irrigation for micro-jets, drip irrigation systems, and garden sprinklers. This manual provides instructions for the proper installation, programming, operation, and maintenance of your watering timer.

Производот завршиview

Orbit 94162 Buddy Digital Automatic Watering Timer front view

Слика 1: Предна страна view of the Orbit 94162 Buddy Digital Automatic Watering Timer, showing the digital display, control buttons, and rotary dial.

This digital watering timer features a user-friendly interface with a large LCD display, intuitive control buttons, and a rotary dial for selecting various programming functions. It is equipped with a diaphragm solenoid valve for reliable and long-lasting performance.

Инсталација и поставување

1. Инсталација на батерија

  1. Осигурајте се дека тајмерот е во положба „ИСКЛУЧЕНО“.
  2. Пронајдете го преградата за батерии на задната страна од тајмерот.
  3. Open the compartment and insert two (2) AA alkaline batteries, observing the correct polarity (+/-).
  4. Close the battery compartment securely. The display should illuminate.

2. Прикачување на чешма

Orbit 94162 Buddy Digital Automatic Watering Timer attached to a garden faucet

Figure 2: The watering timer connected to a standard garden faucet with a hose attached.

  1. Thread the timer onto any standard outdoor garden faucet. Hand-tighten only. Do not use tools.
  2. Прикачете го градинарското црево или системот за наводнување на приклучокот од тајмерот.
  3. Turn on the faucet completely. The timer is designed to operate with full water pressure.

Важно: When freezing temperatures are expected, timers must be removed from hose faucets to prevent potential freezing damage.

Програмирање и работа

Close-up of Orbit 94162 Buddy Digital Automatic Watering Timer dial and display

Слика 3: Одблиску view of the timer's rotary dial and digital display, showing various programming options.

The timer features a rotary dial with several settings for easy programming:

1. Set Current Time (SET CLOCK)

  1. Свртете го бројчаникот на „ПОСТАВИ ЧАСОВНИК“.
  2. Use the '+' and '-' buttons to adjust the hour. Press the '+' or '-' button to change the value. Hold the button for faster adjustment.
  3. Press the 'MANUAL' button to switch between AM/PM.
  4. Користете ги копчињата „+“ и „-“ за да ги прилагодите минутите.
  5. Turn the dial to the next setting or 'AUTO' to save.

2. Set Start Time (START TIME)

  1. Свртете го бројчаникот на „ВРЕМЕ НА ПОЧЕТОК“.
  2. Use the '+' and '-' buttons to set the desired time for watering to begin.
  3. Press the 'MANUAL' button to switch between AM/PM.
  4. Turn the dial to the next setting or 'AUTO' to save.

3. Set Watering Duration (HOW LONG)

  1. Свртете го бројчаникот на „КОЛКУ ДОЛГО“.
  2. Use the '+' and '-' buttons to set the watering duration from 1 to 240 minutes.
  3. Turn the dial to the next setting or 'AUTO' to save.

4. Set Watering Frequency (HOW OFTEN)

  1. Свртете го бројчаникот на „КОЛКУ ЧЕСТО“.
  2. Use the '+' and '-' buttons to set the watering frequency. Options include every 6 hours, every 12 hours, or every 1 to 7 days.
  3. Turn the dial to 'AUTO' to save and activate the program.

5. Автоматско работење (AUTO)

Once all settings are programmed, turn the dial to 'AUTO'. The timer will now operate according to your set schedule. The display will show the current time and the next scheduled watering cycle.

6. Рачно работење

To water manually, press the 'MANUAL' button. Use the '+' and '-' buttons to set the desired manual watering duration. Press 'MANUAL' again to start watering. To stop manual watering, press 'MANUAL' again or turn the dial to 'OFF'.

7. Одложување на дождот

To activate a rain delay, press and hold the '+' button while the dial is in the 'AUTO' position. This will pause the watering schedule for a set period (e.g., 24, 48, 72 hours). Press the '+' button repeatedly to cycle through delay options. The timer will resume its schedule automatically after the delay period.

Одржување

Замена на батеријата

Replace batteries annually or when the low battery indicator appears on the display. Always use fresh AA alkaline batteries. Remove old batteries promptly to prevent leakage.

Чистење

Исчистете ја надворешноста на тајмерот со рекламаamp крпа. Не користете абразивни средства за чистење и не го потопувајте уредот во вода.

Зимување

Before the first frost, disconnect the timer from the faucet and drain any remaining water. Store the timer indoors in a dry, protected area where temperatures will not drop below freezing. Removing batteries during storage is recommended.

Решавање проблеми

Спецификации

БрендОрбита
Број на модел94162
БојаЗелена
МатеријалПластика
Димензии на производот (Д x Ш x В)7 x 17 x 20.5 cm
Тежина на ставката400 грама
Извор на енергија2 x AA батерии (не се вклучени)
Времетраење на наводнување1 до 240 минути
Фреквенција на наводнувањеEvery 6 hours, 12 hours, or 1 to 7 days
Број на поставки5 (Поставување на часовник, Време на почеток, Колку долго, Колку често, Автоматски/Исклучено)
UPC05060246190090

Информации за гаранцијата

За подетални информации за гаранцијата, ве молиме погледнете го официјалниот сајт на производителот website or the warranty card included with your product packaging. Keep your purchase receipt as proof of purchase for any warranty claims.

Поддршка за корисници

Should you require technical assistance, have questions regarding product operation, or need to report an issue, please contact Orbit customer support. Contact details can typically be found on the Orbit webлокација или пакување на производот.

Поврзани документи - 94162

Предview Дигитален тајмер за чешма Orbit 94162 со едно пристаниште за црево: Упатство за употреба и водич за програмирање
Сеопфатни упатства за дигиталниот тајмер за црево за славина Orbit 94162. Опфаќа инсталација, замена на батеријата, режими на програмирање (часовник, време на стартување, времетраење, фреквенција), автоматски режим, одложување на дожд, рачно наводнување, решавање проблеми и спецификации.
Предview Упатство за користење и упатство за програмирање за Orbit 2 Outlet Advanced Hose Faucet Timer
Сеопфатен водич за тајмерот за славина Orbit 2 Outlet Advanced Hose, детали за инсталацијата, програмирањето на распоредите за наводнување, рачното работење, функциите за одложување на дожд, совети за решавање проблеми и важни безбедносни предупредувања.
Предview Тајмер за чешма за излезно црево Orbit 1 Dial 4: Водич за инсталација и програмирање
Сеопфатен водич за инсталирање, програмирање и користење на тајмерот за славина Orbit 1 Dial 4 Outlet Hose Faucet за ефикасно наводнување на градината. Дознајте за карактеристиките на тајмерот, поставувањето, опциите за програмирање, дополнителните функции како што се одложување на дожд и рачно наводнување, како и совети за решавање проблеми.
Предview Едноставен тајмер за наводнување на излезот Orbit 1: Упатство за употреба и упатства за програмирање
Сеопфатен водич за програмирање и користење на тајмерот за наводнување Orbit 1 Outlet Simple, вклучувајќи карактеристики, инсталација, решавање проблеми и важни предупредувања.
Предview Тајмер за славина за излезно црево Orbit 1 Dial 1: Упатство за употреба и програмирање
Научете како да го инсталирате, програмирате и користите вашиот тајмер за славина Orbit 1 Dial 1 Outlet Hose Faucet за ефикасно наводнување на градината. Вклучува карактеристики, поставување и решавање проблеми.
Предview Упатство за користење и упатства за дигитален тајмер со еден порт Orbit SunMate
Сеопфатен водич за дигитален тајмер со еден порт Orbit SunMate, кој опфаќа инсталација, програмирање, решавање проблеми и спецификации. Научете како да поставите распореди за наводнување, времетраење и фреквенции за вашата градина.