Swagelok SS-43GXS4 3-Way Ball Valve

1. Вовед

This manual provides essential information for the safe and effective installation, operation, and maintenance of the Swagelok SS-43GXS4 3-Way Ball Valve. Please read this manual thoroughly before using the product to ensure proper handling and to prevent potential hazards or damage.

2. Информации за безбедност

WARNING: Improper installation, operation, or maintenance can lead to serious injury or property damage. Always follow industry best practices and local regulations.

• Пред инсталација или одржување, проверете дали системот е депривиран и испразнет.
• Verify material compatibility of the valve with the system media. The valve is constructed from stainless steel.
• Do not exceed the maximum pressure rating of 2500 PSIG at 100°F (172 Bar at 37°C).
• Носете соодветна лична заштитна опрема (ЛЗО) за време на инсталацијата и работата.
• Consult a qualified professional for any procedures beyond the scope of this manual.

3. Производот завршиview

The Swagelok SS-43GXS4 is a high-quality 3-way ball valve designed for reliable flow control in various industrial applications. It features a durable stainless steel construction and compression fittings for secure connections.

This image displays the Swagelok SS-43GXS4 3-Way Ball Valve. It is constructed from stainless steel, featuring a cubic body with three ports and a black lever handle for operation. The Swagelok logo is visible on the valve body.

Клучни карактеристики:

• Материјал: Нерѓосувачки челик
• Број на пристаништа: 3
• Големина на влезната врска: 0.44 Inches (7/16"-20" Fine Thread)
• Големина на приклучокот за штекер: 0.25 инчи
• Тип на врска: Компресија
• Оценка за притисок: 2500 PSIG @ 100°F (172 Bar @ 37°C)

4. Поставување и инсталација

Proper installation is crucial for the valve's performance and safety. Follow these general guidelines:

1. Подготовка на системот: Ensure the system is clean, free of debris, and depressurized.
2. Врска: Connect the valve to the system piping using appropriate compression fitting techniques. Ensure tubing ends are properly prepared (cut square, deburred).
3. Затегнување: Follow Swagelok's recommended tightening procedures for compression fittings to achieve a leak-tight seal. Overtightening or undertightening can lead to leaks.
4. Ориентација: Install the valve in an orientation that allows for easy access to the handle and clear indication of flow direction.
5. Поддршка: Provide adequate support for the valve and connected tubing to prevent stress on the connections.
6. Тест за истекување: After installation, slowly pressurize the system and perform a leak test using a suitable leak detection solution.

5. Упатства за работа

The Swagelok SS-43GXS4 is a 3-way ball valve, meaning it can direct flow between three ports. The handle position indicates the flow path.

• Позиција на рачката: The handle typically aligns with the port(s) that are open. For a 3-way valve, the handle will point towards the port that is затворена, or indicate the direction of flow between two ports while blocking the third. Refer to the valve body markings for specific flow configurations (e.g., L-port or T-port flow paths).
• Активирање: To change the flow path, rotate the handle 90 degrees. Ensure the handle is fully engaged in the desired position.
• Контрола на проток: This valve is designed for on/off service and flow diversion, not for throttling or flow regulation.
• Температура и притисок: Operate the valve within its specified temperature and pressure limits to prevent damage and ensure safety.

6. Одржување

Regular inspection and maintenance can extend the life of your Swagelok valve. This valve is generally designed for minimal maintenance, but periodic checks are recommended.

• Визуелна инспекција: Periodically inspect the valve for signs of external leakage, corrosion, or damage to the body or handle.
• Проверка на функционалност: Ensure the handle operates smoothly and fully engages in its positions. If the handle is stiff or difficult to turn, do not force it.
• Чистење: Keep the exterior of the valve clean. Avoid using harsh chemicals that may damage the stainless steel or seals.
• Замена на заптивка: Internal seals may degrade over time depending on service conditions. For internal maintenance or seal replacement, it is recommended to contact Swagelok or a certified service technician. Do not attempt to disassemble the valve without proper training and tools.

7 Смена на проблеми

This section addresses common issues that may arise during the use of the Swagelok SS-43GXS4 valve.

• Протекување на приклучоците:
  • Ensure compression fittings are properly tightened according to Swagelok specifications.
  • Check for damaged tubing or fitting components.
  • Verify that the system pressure does not exceed the valve's rating.
• Valve Difficult to Operate (Stiff Handle):
  • Не притискајте ја рачката на сила.
  • The valve may require servicing or replacement if internal components are seized or damaged.
  • Ensure the valve is not subjected to extreme temperatures outside its operating range.
• No Flow or Restricted Flow:
  • Verify the handle is in the correct position for the desired flow path.
  • Check for blockages in the system or within the valve.

For persistent issues or problems not listed here, contact Swagelok technical support.

8. Спецификации

9. Гаранција и поддршка

For information regarding product warranty, technical support, or service, please contact Swagelok directly through their official website or authorized distributors. Provide your product model number (SS-43GXS4) and purchase details when seeking assistance.