1. Вовед
1.1. Во текотview
The Hager WITTY charging station is designed for charging electric vehicles in accordance with Mode 3 (IEC 61851-1) and Mode 2 standards. It supports both Type 3 and standard socket connections, offering flexible charging solutions for various electric vehicles. This device operates on a 3-phase + Neutral, 32A electrical supply, delivering power from 4 kW to 22 kW.
1.2. Инструкции за безбедност
- Инсталацијата мора да ја изврши квалификуван електричар во согласност со локалните и националните електрични прописи.
- Do not attempt to open or repair the charging station yourself. Contact qualified service personnel.
- Ensure the charging station is properly grounded.
- Do not use the charging station if it is damaged or shows signs of malfunction.
- Keep children and unauthorized persons away from the charging station during operation.
- Avoid exposing the charging station to extreme temperatures, direct sunlight for prolonged periods, or corrosive substances.
2. Опис на производот
2.1. Карактеристики
- Compatible with Mode 3 (Type 3) and Mode 2 charging.
- Free access operation.
- Power output: 4 kW to 22 kW.
- Input: 3-phase + Neutral, 32A.
- Integrated status indicator light.
2.2. Компоненти
The Hager WITTY charging station typically includes:
- Станица за полнење
- Хардвер за монтирање (завртки, сидра)
- Упатство за употреба (овој документ)
Слика 1: Предна страна view of the Hager WITTY charging station with a green operational light, mounted on a textured wall.
Слика 2: Страна view of the Hager WITTY charging station, illustrating the cable connection point and the unit's profile.
Слика 3: Детална предна страна view of the Hager WITTY charging station, emphasizing the integrated green status light.
3. Поставување
3.1. Локација за инсталација
Choose a suitable location that is protected from direct impact, excessive moisture, and extreme temperatures. Ensure adequate ventilation and accessibility for maintenance.
3.2. Монтирање
- Mark the drilling points on the wall using the provided template (if applicable) or by measuring the mounting holes on the unit.
- Издупчете дупки и вметнете соодветни ѕидни типли.
- Secure the charging station to the wall using the provided screws.
3.3. Електрично поврзување
ПРЕДУПРЕДУВАЊЕ: Електричната инсталација мора да ја изврши квалификуван електричар.
- Ensure the main power supply is disconnected before beginning any electrical work.
- Connect the 3-phase + Neutral (3Ph+N) 32A power supply to the designated terminals inside the charging station.
- Ensure proper grounding is established.
- Verify all connections are secure and correctly wired according to the wiring diagram provided with the unit (refer to the separate installation guide for detailed diagrams).
- Close the charging station cover securely.
4. Работење
4.1. Starting a Charge
- Ensure the charging station is powered on and the status indicator light is green (ready).
- Connect the charging cable to your electric vehicle's charging port.
- Connect the other end of the charging cable to the charging station's outlet (Type 3 or Mode 2 socket).
- The charging station will automatically initiate the charging process. The status indicator light may change to blue or flashing green, depending on the charging status.
4.2. Stopping a Charge
- Disconnect the charging cable from your electric vehicle first.
- Disconnect the charging cable from the charging station.
- The charging station will return to a ready state (green indicator light).
4.3. Индикатори за статус
- Зелено светло: Подготвено за полнење.
- Blue Light (or flashing green): Полнењето е во тек.
- Red Light (or flashing red): Error or fault detected. Refer to the Troubleshooting section.
- Без светлина: Power off or system fault.
5. Одржување
5.1. Чистење
Исчистете ја надворешноста на станицата за полнење со мека, дamp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals. Ensure the unit is powered off before cleaning.
5.2. Инспекција
Periodically inspect the charging station for any signs of damage, wear, or loose connections. Check the charging cable for fraying or damage. If any damage is found, discontinue use and contact a qualified technician.
6 Смена на проблеми
| Проблем | Можна причина | Решение |
|---|---|---|
| No power/No light | Power supply disconnected; Circuit breaker tripped. | Check power supply; Reset circuit breaker. If problem persists, contact a qualified electrician. |
| Црвено индикаторско светло | Internal fault; Overcurrent; Ground fault. | Disconnect and reconnect the vehicle. If the error persists, power cycle the unit. If still red, contact service. |
| Полнењето не започнува | Cable not properly connected; Vehicle not ready to charge; Charging station fault. | Ensure cable is securely connected to both vehicle and station. Check vehicle's charging status. Power cycle the charging station. |
7. Спецификации
| Карактеристика | Детал |
|---|---|
| Модел | XEV103 |
| Режим на полнење | Mode 3 (IEC 61851-1), Mode 2 |
| Тип на конектор | Type 3 / Standard Socket |
| Влез волуменtage | 3-phase + Neutral |
| Макс струја | 32 А |
| Излезна моќност | 4 kW до 22 kW |
| Пристап | Бесплатен пристап |
| ASIN | B00CSJUVKA |
8. Гаранција и поддршка
For warranty information and technical support, please refer to the official Hager website or contact your local Hager distributor. Keep your purchase receipt for warranty claims.
Spare parts availability: Information not available.
