1. Вовед
The HID RK40 iCLASS SE Smart Card Reader with Keypad is a versatile access control device designed for secure identification. It supports 13.56 MHz contactless smart card technology and offers dual authentication options: contactless card presentation combined with a Personal Identification Number (PIN), or single-factor authentication using either a card or a PIN. The keypad features a durable, weatherproof design with tactile response and backlit numbering, suitable for various environmental conditions.
2. Информации за безбедност
- Внимателно прочитајте ги сите упатства пред инсталацијата и работата.
- Инсталацијата треба да ја изврши квалификуван персонал во согласност со локалните електрични прописи.
- Осигурајте се дека е исклучено напојувањето пред да вршите какво било поврзување или одржување.
- Do not expose the device to extreme temperatures or corrosive substances beyond its specified operating conditions.
- Use only approved power supplies and cables.
3. Содржина на пакетот
Проверете дали сите артикли се присутни во пакувањето:
- HID RK40 iCLASS SE Smart Card Reader with Keypad
- Хардвер за монтирање (завртки, сидра)
- Водич за инсталација (овој документ)
4. Производот завршиview
The image below illustrates the front and rear views of the HID RK40 reader, highlighting its keypad and wiring connections.
This image displays both the front and back of the HID RK40 reader. The front features a black housing with a numeric keypad (0-9, *, #) and the HID logo. The back reveals the product label, indicating 'iCLASS SE RK40', and a multi-colored wiring harness for connection to an access control panel.
The front panel includes a 12-position keypad for PIN entry and an integrated smart card reader. The rear panel contains the wiring connections for power, data, and control signals.
5. Поставување
5.1 Монтирање
- Select a suitable mounting location, ensuring it is flat and secure.
- Use the provided mounting template (if applicable) to mark drilling points.
- Дупчете пилот-дупки за завртките за монтирање.
- Route the wiring through the wall or mounting surface.
- Secure the reader to the mounting surface using the provided screws. Do not overtighten.
5.2 Wици
Connect the reader to the access control panel according to the panel's specifications and the wiring diagram below. Ensure all connections are secure and insulated.
| Боја на жица | Функција | Опис |
|---|---|---|
| Црвено | Моќност (+) | Connect to +5VDC to +16VDC power supply. |
| Црното | Земја (-) | Connect to power supply ground. |
| Зелена | Data 0 (Wiegand) | Wiegand Data 0 output. |
| Бело | Data 1 (Wiegand) | Wiegand Data 1 output. |
| Браун | LED контрола | Controls the reader's LED indicator. |
| Портокалова | Контрола на бипер | Controls the reader's audible beeper. |
| Жолта | Држете | Input for holding card data. |
| Сино | OSDP Data (RS-485) | OSDP communication line. |
| Виолетова | OSDP Data (RS-485) | OSDP communication line. |
Note: Specific wiring configurations may vary based on the access control system. Refer to your system's documentation for detailed instructions.
6. Упатства за работа
6.1 Card Presentation
To gain access using a smart card:
- Present your iCLASS SE smart card within close proximity to the reader's front surface.
- The reader will emit an audible beep and/or illuminate an LED to indicate a successful read.
- If configured for card-only access, the access control system will grant or deny access based on the card's credentials.
6.2 PIN Entry (Keypad)
For systems requiring PIN entry (either standalone or combined with a card):
- If required, present your smart card first (refer to 6.1).
- Enter your Personal Identification Number (PIN) using the numeric keypad.
- Press the '#' key (or as configured by your system) to confirm the PIN entry.
- The reader will provide feedback (beep/LED) indicating acceptance or rejection of the PIN.
7. Одржување
- Чистење: Clean the reader's surface periodically with a soft, damp крпа. Не користете абразивни средства за чистење или растворувачи.
- Инспекција: Regularly inspect the reader for any signs of physical damage or loose connections.
- Фирмвер: Consult your system administrator for information on firmware updates.
8 Смена на проблеми
| Проблем | Можна причина | Решение |
|---|---|---|
| Reader does not power on. | Нема напојување; неправилно поврзување на жиците. | Проверете ги приклучоците за напојување и осигурајте се дека јачината на звукот е точна.tage. Verify wiring according to Section 5.2. |
| Card not read. | Card not compatible; card damaged; incorrect presentation. | Ensure card is iCLASS SE compatible. Try another card. Present card closer to the reader. |
| PIN entry not accepted. | Incorrect PIN; system not configured for PIN. | Verify the correct PIN. Consult your system administrator to confirm PIN configuration. |
| No LED or audible feedback. | LED/Beeper control wiring issue; disabled in system. | Check Brown and Orange wire connections. Consult system administrator for configuration. |
Доколку проблемите продолжат, контактирајте ја техничката поддршка.
9. Спецификации
- Модел: RK40
- Технологија: 13.56 MHz iCLASS SE Smart Card
- Поврзување: Wiegand, OSDP (RS-485), USB Type A (for configuration/diagnostics)
- Димензии: 7.1 x 4.7 x 1.8 инчи (180.34 x 119.38 x 45.72 мм)
- Тежина: 10.7 унци (303.34 грама)
- Напојување: +5VDC до +16VDC
- Специјална карактеристика: Waterproof keypad
- Сертификација за животна средина: RoHS, WEEE
- Производител: Глобална корпорација HID
10. Информации за гаранцијата
HID Global Corporation warrants its products against defects in materials and workmanship under normal use and service for a specified period from the date of purchase. For detailed warranty terms and conditions, please refer to the official HID Global website or contact your authorized distributor. This warranty does not cover damage caused by improper installation, misuse, unauthorized modification, or acts of nature.
11. Техничка поддршка
For technical assistance, troubleshooting, or further information regarding the HID RK40 iCLASS SE Smart Card Reader with Keypad, please contact HID Global Technical Support or your local authorized HID Global partner. Support resources, including FAQs and documentation, may also be available on the official HID Global webсајт.
