Wohler VIS350 Plus Visual Inspection Camera System User Manual

1. Вовед

The Wohler VIS350 Plus is a professional visual inspection camera system designed for detailed examination of drains, sewers, flue gas and ventilation lines, and various industrial systems. This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your device.

1.1. Содржина на пакетот

Ве молиме проверете дали сите компоненти се присутни при распакувањето:

• Wohler VIS350 Plus Camera System Main Unit
• Цврста торбичка за носење
• 1.5" Detachable Pan/Tilt Color Camera Head with Transmitter
• 1" Detachable Color Camera Head with Transmitter
• 100' (0.26") Push Rod
• 7" TFT Removable Color Monitor with 6' Cable
• 2 GB SD-картичка
• Мини USB кабел
• L200 Locator
• Guidance Sleeve
• Guidance Ball for Push Rod
• 5 Replaceable Domes
• 2 Long-Life Batteries (providing approximately 4 hours total operation)

Figure 1: Wohler VIS350 Plus System components within the carrying case.

2. Информации за безбедност

Adherence to safety guidelines is crucial for preventing injury and equipment damage. Read all instructions before operating the device.

2.1. Општа безбедност

• Operate the system only in well-ventilated areas.
• Do not expose the system to extreme temperatures or direct sunlight for extended periods.
• Keep the equipment away from flammable liquids or gases.
• Ensure the work area is clear of obstructions and hazards.

2.2. Електрична безбедност

• Користете го само обезбедениот адаптер за напојување и кабли.
• Do not operate the system with damaged cables or connectors.
• Avoid contact with water when handling electrical components, except for the waterproof camera heads.
• Исклучете ја струјата пред чистење или сервисирање.

2.3. Ракување и складирање

• Transport the system in its designated carrying case to prevent damage.
• Avoid dropping or subjecting the equipment to severe impacts.
• Store the system in a dry, cool place when not in use.

3. Компоненти надview

The Wohler VIS350 Plus system comprises several key components designed for efficient inspection:

• Главна единица: Houses the control panel, battery compartment, and connections for the monitor and push rod.
• Detachable Camera Heads: Includes a 1.5" pan/tilt camera and a 1" fixed camera, both waterproof and equipped with built-in transmitters and adjustable lighting.
• Потисна прачка: A flexible yet robust rod for guiding the camera head through pipes and conduits.
• TFT Color Monitor: A 7" removable display for viewing live inspection footage, with controls for system functions.
• L200 Locator: Used to precisely locate the position of the camera head underground or within structures.
• SD Card & USB Cable: For recording and transferring inspection data (videos and still photos).

Figure 2: Wohler VIS350 Plus System in operation during a drain inspection.

4. Поставување

Follow these steps for initial setup of your Wohler VIS350 Plus system:

4.1. Инсталација и полнење на батеријата

1. Open the battery compartment on the main unit.
2. Insert the charged batteries, ensuring correct polarity.
3. Добро затворете ја преградата.
4. To charge, connect the power adapter to the main unit and a power outlet. The charging indicator will illuminate.

4.2. Camera Head Attachment

1. Select the appropriate camera head (1.5" pan/tilt or 1" fixed) for your inspection.
2. Align the camera head connector with the push rod connector.
3. Gently push and twist to secure the connection. Ensure it is firmly attached and waterproof.
4. Attach a guidance dome or ball if required for navigation within the inspection area.

4.3. Monitor Connection and SD Card Insertion

1. Connect the 7" TFT monitor to the main unit using the provided 6' cable.
2. Locate the SD card slot on the monitor or main unit.
3. Insert the 2GB SD card with the contacts facing down until it clicks into place.

5. Упатства за работа

This section details the basic operation of the Wohler VIS350 Plus system.

5.1. Вклучување/исклучување

1. Притиснете го ВКЛУЧЕНО/ИСКЛУЧЕНО button on the main unit to power on the system. The monitor will display the live feed.
2. За да се исклучи, притиснете и задржете го ВКЛУЧЕНО/ИСКЛУЧЕНО button until the system shuts down.

5.2. Monitor Controls and Navigation

The monitor features buttons for navigation and control:

• МЕНИ: Accesses the system settings and options.
• ИГРАЈТЕ: Reviews recorded videos and photos.
• ЕВИДЕНЦИЈА: Започнува или запира снимање видео.
• Копчиња со стрелки: Navigate through menus and control camera pan/tilt and lighting.

5.3. Camera Control (Pan/Tilt and Lighting)

When using the 1.5" pan/tilt camera head:

• Use the monitor's arrow buttons to control the camera's 180° pan and 360° tilt movements.
• Adjust the four levels of integrated LED lighting using the designated buttons on the monitor or main unit to optimize visibility.

5.4. Inspection Procedures

1. Carefully insert the camera head and push rod into the inspection area.
2. Slowly advance the push rod, observing the live feed on the monitor.
3. Use the pan/tilt function and lighting adjustments to thoroughly examine the area.
4. If using the L200 Locator, activate it to pinpoint the camera head's position as needed.
5. Retract the push rod carefully after completing the inspection.

6. Recording and Data Transfer

The VIS350 Plus allows for recording of inspection data.

6.1. Recording Videos and Photos

1. Ensure an SD card is properly inserted.
2. За да снимате видео, притиснете го копчето РЕКОРД button. Press again to stop.
3. To capture a still photo, press the designated photo capture button (refer to monitor controls for specific button).

6.2. Пренос на податоци

Снимено files can be accessed via two methods:

• SD-картичка: Eject the SD card from the monitor/main unit and insert it into a compatible card reader on a computer.
• USB конекција: Connect the main unit to a computer using the mini USB cable. The system will appear as a removable storage device, allowing you to transfer files.

7. Одржување и грижа

Proper maintenance ensures the longevity and optimal performance of your inspection system.

7.1. Чистење

• After each use, clean the camera head and push rod with a damp cloth and mild detergent. Rinse thoroughly with clean water.
• Wipe the monitor and main unit with a soft, dry cloth. Avoid abrasive cleaners.
• Пред складирање, проверете дали сите компоненти се суви.

7.2. Нега на батерии

• Recharge batteries after each use or when the low battery indicator appears.
• For long-term storage, charge batteries to approximately 50% and store in a cool, dry place.
• Do not expose batteries to extreme heat or puncture them.

7.3. Складирање

Store the entire system in its rugged carrying case to protect it from dust, moisture, and physical damage. Ensure all cables are neatly coiled.

8 Смена на проблеми

This section addresses common issues you might encounter with the Wohler VIS350 Plus.

• Без моќност:
  Можна причина: Discharged batteries or loose connection.
  Решение: Ensure batteries are fully charged and correctly inserted. Check all power connections.
• Нема слика на мониторот:
  Можна причина: Camera head not connected, monitor cable loose, or camera head malfunction.
  Решение: Verify camera head is securely attached to the push rod. Check the monitor cable connection. Restart the system.
• Cannot Record Video/Photos:
  Можна причина: SD card full, not inserted correctly, or corrupted.
  Решение: Check SD card capacity. Reinsert the SD card. Format the SD card (this will erase all data).
• Camera Head Not Panning/Tilting:
  Можна причина: Loose connection, obstruction, or internal issue.
  Решение: Check camera head connection. Ensure no debris is obstructing movement.
• Лош квалитет на сликата:
  Можна причина: Dirty camera lens, insufficient lighting, or environmental factors.
  Решение: Clean the camera lens. Adjust LED lighting levels.

9. Спецификации

Technical specifications for the Wohler VIS350 Plus Visual Inspection Camera System:

10. Гаранција и поддршка

10.1. Информации за гаранцијата

Wohler products are manufactured to high-quality standards and are covered by a manufacturer's warranty against defects in materials and workmanship. Please refer to the warranty card included with your product or visit the official Wohler webстраница за детални услови за гаранција.

10.2. Поддршка за корисници

For technical assistance, spare parts, or service inquiries, please contact Wohler customer support. You can find contact information and additional resources by visiting the official Wohler store or webсајт:

Visit the Wohler Store on Amazon