1. Вовед
The Brodit ProClip is a vehicle-specific mounting bracket designed for the dashboard. It provides a secure and convenient platform for attaching various device holders, such as those for mobile phones, PDAs, or hands-free kits. This ProClip is engineered for the Peugeot 308 (2014 model year and newer) and ensures that your device is always within easy reach without obstructing your view or damaging the vehicle's interior. It is made from durable black ABS plastic.
2. Содржина на пакетот
- Brodit 854952 ProClip Angled Mount
- Детални инструкции за инсталација
3. Поставување и инсталација
The installation of the ProClip is quick and straightforward, requiring no special tools or dismantling of the dashboard. Follow these steps carefully to ensure a secure fit and to avoid damage to your vehicle's interior.
3.1 Identify Installation Area
Locate the designated installation area on your Peugeot 308 dashboard, as indicated in the diagram. The ProClip is designed to fit into the gap between the dashboard and the center console trim.
Слика 1: Во текот наview of the ProClip installation area in a Peugeot 308. Point 1 indicates the lower part of the center console, and point 2 indicates the position where the ProClip will be mounted, angled towards the driver. 3.2 Prepare the Dashboard Gap
Use a plastic pry tool (or a similar non-marring tool) to gently widen the gap between the dashboard and the center console trim. This creates space for the ProClip's attachment edges.
Слика 2: A hand carefully prying open the dashboard trim to create a gap for the ProClip. This step ensures a smooth insertion without forcing the mount. 3.3 Insert the Lower Edge
Hook the lower edge of the ProClip into the gap you just created. Ensure it is seated firmly and correctly.
Слика 3: The ProClip being inserted into the dashboard gap. The lower part of the mount is guided into the opening, ensuring proper alignment. 3.4 Secure the Upper Edge
Press the upper part of the ProClip firmly into the dashboard until it snaps into place. The angled design should align with the dashboard contours.
Слика 4: Securing the upper edge of the ProClip. Gentle but firm pressure is applied to ensure the mount is fully seated and stable. 3.5 Конечна проверка
Verify that the ProClip is securely attached and does not move. It should be stable and ready for a device holder to be mounted onto it.
Слика 5: The Brodit ProClip fully installed on the dashboard of a Peugeot 308. The mount is positioned to the right of the central display and controls, providing an angled surface for attaching a device holder.
4. Operating the ProClip
The ProClip itself is a passive mounting platform. To use it, you will need to attach a device-specific holder (e.g., for a smartphone, GPS, or tablet) to its faceplate. Brodit offers a wide range of device holders that are compatible with the ProClip system.
- Attaching a Device Holder: Align the screw holes on your device holder with the pre-drilled holes on the ProClip's faceplate. Use the screws provided with your device holder to securely fasten it to the ProClip.
- Поставување: The angled design positions your device conveniently for viewing and interaction while driving, without obstructing essential vehicle controls or airbags.
5. Одржување
The Brodit ProClip requires minimal maintenance to ensure its longevity and appearance.
- Чистење: Wipe the ProClip with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners, as these can damage the ABS plastic finish.
- Инспекција: Periodically check that the ProClip remains securely fastened to the dashboard. If it feels loose, gently press it back into place.
6 Смена на проблеми
- ProClip feels loose after installation: Ensure both the upper and lower edges are fully seated in their respective gaps. Re-apply gentle pressure to secure it. If the issue persists, double-check that you have the correct ProClip model for your specific vehicle and model year.
- Difficulty inserting the ProClip: Do not force the ProClip. Ensure the dashboard gap is sufficiently widened using a non-marring tool. Verify that the ProClip is oriented correctly before insertion.
- Device holder does not fit: Ensure your device holder is compatible with the Brodit ProClip system and uses the standard AMPS hole pattern for attachment.
7. Спецификации
| Карактеристика | Детал |
|---|---|
| Број на модел | 854952 |
| Бренд | Бродит |
| Димензии на производот | 15 x 10 x 5 cm |
| Тежина на ставката | 70 гр |
| Боја | Црното |
| Материјал | ABS пластика |
| Тип на монтирање | Контролна табла |
| Компатибилни уреди | Smartphones (with compatible holder) |
| Компатибилни модели на телефони | Peugeot 308 (2014 onwards) |
| Посебни карактеристики | Hand Free (when used with a device holder) |
8. Гаранција и поддршка
Specific warranty information for the Brodit 854952 ProClip Angled Mount is typically provided by the retailer or directly by Brodit at the time of purchase. Please refer to your purchase documentation or the official Brodit webстраница за детални услови за гаранција.
For technical support or further assistance, please contact Brodit customer service or your authorized reseller.
