1. Вовед
The Einhell GC-DP 1340 G dirty water pump is a powerful and robust tool designed for demanding drainage tasks. It is ideal for pumping heavily contaminated water from various sources such as ponds, wells, construction sites, and flooded basements. With a high flow rate and durable construction, this pump ensures efficient and reliable performance.
Figure 1: Einhell GC-DP 1340 G Dirty Water Pump and included rope.
2. Инструкции за безбедност
Секогаш почитувајте ги следниве безбедносни упатства за да спречите повреди и оштетување на опремата:
- Read the entire manual before operating the pump.
- Ensure the power supply matches the pump's specifications (230 Volts).
- Не ракувајте со пумпата со оштетен кабел за напојување или приклучок.
- Never lift or carry the pump by its power cord. Use the transport handle or the provided rope.
- Држете ги децата и неовластените лица подалеку од работната зона.
- Не пумпајте запаливи, експлозивни или корозивни течности.
- Ensure adequate ventilation when operating in enclosed spaces.
- Disconnect the pump from the power supply before any maintenance or cleaning.
3. Компоненти на производот
Familiarize yourself with the main components of your Einhell dirty water pump:
4. Поставување
Follow these steps for proper setup of your dirty water pump:
- Прикачете црево: Securely connect a 2-inch (50.8mm) discharge hose to the pump's G2 connection. Ensure the connection is tight to prevent leaks.
- Позиционирање: Place the pump on a stable, level surface in the area to be drained. Ensure the pump is fully submerged in the water for optimal operation.
- Оперативен простор: Allow for sufficient operating space around the pump, with a minimum of 50 x 50 cm, and a diameter of 27 cm for the pump itself.
- Прилагодување на лебдечкиот прекинувач: Adjust the float switch cable length to control the desired ON/OFF water levels. A shorter cable means the pump will switch on and off within a smaller water level range.
- Поврзување за напојување: Plug the pump into a grounded electrical outlet that matches the pump's voltagбарања.
Figure 2: Recommended minimum operating space for the pump.
5. Упатства за работа
The Einhell GC-DP 1340 G pump can operate in continuous or automatic mode:
5.1. Automatic Operation (Float Switch Controlled)
In automatic mode, the pump starts and stops based on the water level, controlled by the float switch. When the water level rises and lifts the float switch, the pump will activate. When the water level drops and the float switch lowers, the pump will deactivate.
Figure 3: Adjustable float switch for automatic operation.
5.2. Континуирано работење
For continuous operation, secure the float switch in an upright position (e.g., by attaching it to the pump handle) so that it remains in the "ON" position regardless of the water level. This will keep the pump running continuously until manually unplugged or the water source is depleted.
The pump is designed to handle dirty water with particles up to 40 mm in size.
Figure 4: Maximum particle size handled by the pump.
6. Одржување
Редовното одржување обезбедува долготрајност и оптимални перформанси на вашата пумпа:
- Чистење: After each use, especially when pumping heavily contaminated water, rinse the pump thoroughly with clean water to remove debris and prevent clogging.
- Инспекција на работното коло: Periodically check the impeller for any blockages or damage. Clear any debris carefully.
- Double Mechanical Seal: The high-quality double mechanical seal is designed for excellent durability and requires no maintenance.
- Складирање: Store the pump in a dry, frost-free location when not in use for extended periods.
Слика 5: Внатрешно view of the pump's impeller.
Figure 6: Illustration of the double mechanical seal for extended lifespan.
7 Смена на проблеми
| Проблем | Можна причина | Решение |
|---|---|---|
| Пумпата не стартува. | No power supply; Float switch not activated; Motor overload. | Check power connection and circuit breaker; Ensure float switch is in "ON" position or water level is sufficient; Allow motor to cool down, then restart. |
| Пумпата работи, но не се испушта вода или протокот е низок. | Hose kinked or blocked; Impeller clogged; Airlock in pump. | Check and clear hose; Disconnect power and clear impeller; Submerge pump fully, tilt it to release air bubbles, then restart. |
| Пумпата неочекувано запира. | Float switch deactivated (water level too low); Thermal overload protection activated. | Check water level and float switch position; Allow pump to cool down. |
8. Спецификации
| Карактеристика | Спецификација |
|---|---|
| Модел | GC-DP 1340 Г |
| Моќ | 1300 вати |
| Voltage | 230 волти |
| Макс. Проток | 23000 литри на час |
| Максимална висина на главата | 10 метри |
| Макс. Големина на честички | 40 мм |
| Поврзување на цревото | G2 (2 inches / 50.8mm) |
| Должина на кабелот | 10 метри |
| Тежина | 19.3 килограми |
| Димензии (Д x Ш x В) | 26 x 19.5 x 51.2 cm |
| Материјал | Нерѓосувачки челик, леано железо |
| Употреба | На отворено |
| Земја на потекло | Кина |
9. Гаранција и поддршка
Einhell products are manufactured with high-quality materials and undergo strict quality controls. While specific warranty details may vary by region and retailer, a standard return policy of 30 days is typically offered for new products.
For technical support, spare parts, or warranty claims, please contact your authorized Einhell dealer or visit the official Einhell website for customer service information. Please have your model number (GC-DP 1340 G) and purchase details ready when contacting support.
За повеќе информации, посетете ја Einhell Brand Store.
