Bosch 00611317 Reed Contact for Dishwasher - Instruction Manual

Вовед

This manual provides essential information for the installation, operation, maintenance, and troubleshooting of the Bosch 00611317 Reed Contact. This component is a crucial replacement part designed for various Bosch and Siemens dishwashers, responsible for accurately detecting water levels and ensuring proper water intake during wash cycles. Please read these instructions carefully before proceeding with installation or any related procedures.

Компатибилност

The Bosch 00611317 Reed Contact is compatible with a wide range of Bosch, Siemens, and Koenic dishwasher models. Please verify your appliance's model number against the following list to ensure compatibility:

• Модели на Сименс: SC73M611, SC73M612, SC73M613, SC73M810, SC74M620, SC74M621, SC75M530, SC76M520, SC76M522, SC76M530, SC76M531, SC76M532, SC76M540, SC76M541, SC76M640, SC78M530, SK23E800, SK23E810, SK25E100, SK25E200, SK25E201, SK25E202, SK25E203, SK25E210, SK25E211, SK26E200, SK26E201, SK26E220, SK26E221, SK26E800, SK26E801, SK26E820, SK26E821, SK75M520, SK75M521, SK75M530, SK75M531, SK75M532, SK76M530, SK76M540, SK76M544, SK78M530, SN45N582, SN45N583, SN45N584, SN45N585, SN45N588, SN45N589, SN45P530, SN45P532, SN45P582, SN45T280, SN45T281, SN45T282, SN45T283, SN45T284, SN45T530, SN46E581, SN46L500, SN46L530, SN46L570, SN46L582, SN46M080, SN46M200, SN46M201, SN46M203, SN46M230, SN46M281, SN46M282, SN46M283, SN46M290, SN46M291, SN46M292, SN46M293, SN46M500, SN46M501, SN46M530, SN46M531, SN46M535
• Бош модели: SBV85M43, SBV85M44, SBV86M50, SBV86M60, SBV87TD01E, SBV87TX01H, SBV88PX00N, SBV88PX16N, SBV88TD01E, SBV88TX01N, SBV88TX03H, SBV88TX06E, SBV88TX16E, SBV88TX26E, SBV88TX36E, SBV90E00, SBV90E30, SBV90M10, SBV93M00, SBV93M10, SBV93M30, SBV93M40, SBV93M50, SBV93M60, SBV95M00, SBV95M10, SBV95M20, SBV95T10, SBV96M00, SBV96M10, SBV98M00, SBV99M20, SBV99M30, SBV99T10, SCE42M06, SCE52M55, SCE52M65, SCE53M05, SCE53M25, SCE53M35, SCE63M05, SCE63M15, SCE63M25, SCE64M05, SCE64M06, SCE64M55, SCE64M65, SGE53U52, SGE53U55, SGE53U56, SGE63E05, SGE63E06, SGE63E15, SGE68U5, SGV63E03, SGV68U53, SGX68U55, SHE68E05, SHE68E15, SHE7ER55, SHE89PW75N, SHE8ER55, SHE9PT55, SHEM78WH5N, SHV58E13, SHV68E13, SHV7ER53, SHV89PW73N, SHV9ER53, SHV9PT53, SHX58E15, SHX58E25, SHX5ER55, SHX68E05, SHX68E15, SHX7ER55, SHX89PW75N, SHX8ER55, SHX9PT55, SHX9PT75, SHX9PT775NL
• Koenic Models: 1KDW64018I, 1KDW64018U, 1KDW64019I, 1KDW64019U

Поставување и инсталација

Replacing the reed contact requires careful attention. If you are unsure about any step, it is recommended to consult a qualified appliance technician.

1. Безбедноста на прво место: Before beginning any work, ensure the dishwasher is completely disconnected from the main power supply by unplugging it or switching off the circuit breaker. Also, turn off the water supply to the dishwasher.
2. Пристап до внатрешноста на машината за миење садови:
   • Remove the top cover of the dishwasher. This usually involves unscrewing a few screws at the back.
   • Locate and remove the left side panel of the dishwasher. This typically involves unscrewing two screws at the front (behind the door seal) and one at the top rear. Carefully lift the metal plate slightly upwards, then pull it backward to unclip it. Allow the plate to drop downwards to access the interior.
3. Locate the Reed Contact (Flow Meter): The reed contact is often housed within a small plastic box, which is part of the flow meter assembly. This assembly is usually located on the left side of the dishwasher's interior, connected to the water intake system.
4. Replace the Component: Carefully open the plastic housing to expose the small electronic circuit board (the reed contact). Gently remove the old circuit board from its plastic holder and insert the new Bosch 00611317 reed contact in its place, ensuring it is correctly oriented and seated.
5. Повторно составете: Reverse the disassembly steps. Reattach the side panel, ensuring all clips and screws are securely fastened. Replace the top cover.
6. Тест операција: Reconnect the dishwasher to the main power supply and turn on the water supply. Run a test cycle to ensure the dishwasher fills with water correctly and operates without error codes.

Оперативни

The Bosch 00611317 Reed Contact is an internal component that functions automatically as part of your dishwasher's control system. Once correctly installed, it requires no direct user operation. Its purpose is to monitor the water flow and level within the dishwasher, signaling the control unit to ensure the correct amount of water is used for each wash cycle. Normal dishwasher operation should resume once the part is installed and functioning correctly.

Одржување

The reed contact itself is a sealed electronic component and does not require routine maintenance. Its longevity is generally tied to the overall cleanliness and proper functioning of the dishwasher's water system. To help prevent issues that might affect the reed contact or other water-sensing components:

• Regularly clean your dishwasher's filters to prevent debris buildup.
• Use appropriate dishwasher detergents and rinse aids to minimize limescale and residue accumulation.
• Periodically run a dishwasher cleaning cycle with a specialized cleaner.

Решавање проблеми

If your dishwasher is experiencing issues related to water intake or level detection, the reed contact may be a contributing factor. Common symptoms and troubleshooting steps include:

• Симптом: Dishwasher not filling with water, or filling with insufficient water.
  Можна причина: Faulty reed contact or flow meter assembly.
  Дејство: Ensure the new reed contact is correctly installed. Check for any blockages in the water inlet hose or the dishwasher's internal water pathways.
• Симптом: Dishwasher displaying error codes such as E30 or 30:00 (specific to some Bosch/Siemens models), indicating a water flow or water level issue.
  Можна причина: Malfunctioning reed contact sending incorrect signals.
  Дејство: Verify the installation of the replacement part. If the error persists, other components of the water system or control board might be at fault.
• Симптом: Dishwasher overfilling or continuously draining.
  Можна причина: Incorrect signals from the reed contact or other water level sensors.
  Дејство: Recheck the installation. Ensure no wires are pinched or connections are loose.

If troubleshooting steps do not resolve the issue, it is advisable to contact a certified appliance technician for further diagnosis and repair.

Спецификации

Гаранција и поддршка

Specific warranty details for the Bosch 00611317 Reed Contact should be obtained from your point of purchase or directly from Bosch. As a replacement part, its warranty may differ from that of a complete appliance.

For technical support, further assistance, or to locate authorized service centers, please refer to the official Bosch website or contact Bosch customer service in your region. Always provide your dishwasher's full model and serial number when seeking support.