1. Вовед
The BSIDE EMT01 is a handheld digital wood moisture meter designed for accurate moisture measurement in various wood species. This conductivity moisture meter is an essential tool for professionals and hobbyists in the wood industry, offering reliable performance for assessing timber conditions.
This manual provides detailed instructions for the proper use, setup, and maintenance of your EMT01 meter to ensure years of reliable service.
Image 1.1: The BSIDE EMT01 meter being used to measure moisture in a piece of wood.
2. Карактеристики
The EMT01 wood moisture meter incorporates several features for efficient and accurate moisture detection:
- Голем LCD дисплеј: Clearly shows wood moisture percentage.
- Мерен опсег: 0% to 99.9% for wood.
- Висока точност: Up to ±0.5%.
- Резолуција: ± 0.1%.
- Разновидна апликација: Suitable for wood, paper, cardboard, and other materials.
- Wood Group Calibration: Contains 4 wood groups with calibrations for approximately 50 species of wood.
- Функција за задржување податоци: Го замрзнува прикажаното мерење за лесно читање.
- Автоматско исклучување: Automatically shuts down after approximately 15 minutes of inactivity to conserve battery life.
- Индикатор за слаба батерија: Displays an icon when the battery needs replacement.
- Integrated Electrode Pins: Durable 10mm (0.4") pins for direct measurement.
Слика 2.1: Повеќекратни views of the EMT01 meter, showing its design and integrated pins.
3. Поставување
3.1 Инсталација на батерија
The EMT01 meter requires one 9V 6F22 battery for operation. Follow these steps to install or replace the battery:
- Осигурајте се дека мерачот е исклучен.
- Пронајдете го капакот на преградата за батерии на задната страна од мерачот.
- Лизнете го капакот надолу за да го отворите преградата.
- Поврзете нова 9V батерија на спојката за батеријата, почитувајќи го правилниот поларитет.
- Place the battery into the compartment and slide the cover back into place until it clicks securely.
Image 3.1: The battery compartment of the EMT01 meter with the cover removed, ready for battery insertion.
3.2 Protective Cap Removal
Before taking measurements, carefully remove the protective cap covering the electrode pins. This cap also serves as a calibration check block.
4. Упатства за работа
4.1 Вклучување/исклучување
- To power on the meter, press the red МОЌ button. The LCD will display the current moisture reading.
- To power off the meter, press the red МОЌ button again. The meter will also automatically power off after approximately 15 minutes of inactivity.
4.2 Selecting Wood Group
The EMT01 meter has four pre-calibrated wood groups (A, B, C, D) to ensure accurate readings for different wood species. Refer to the list below and the meter's label to select the appropriate group:
- Група А: Teak, Afromosia, Walnut, Rubber Tree, Imbuia, Kokrodua, Niangon, Bidinkala, Cork
- Група Б: White Poplar, Keruing, Beech, Cedar, Tola
- Група Ц: Lauan, Ash, Elm, Fir, Maple, Padauk, Oak, Cherry
- Група Д: Basswood, Larch, Pine, Birch
To select a wood group, press the РЕЖИМ button repeatedly until the desired group (A, B, C, or D) is displayed on the LCD.
Image 4.1: Detailed breakdown of wood species categorized into groups A, B, C, and D for accurate measurement.
4.3 Преземање на мерење
- Power on the meter and select the correct wood group.
- Carefully push the electrode pins into the wood surface to be measured. Ensure both pins penetrate the material sufficiently for good contact.
- Read the moisture percentage displayed on the LCD.
- To hold the current reading on the display, press the ДРЖИ button. Press it again to release the hold function.
- After measurement, gently pull the pins out of the wood and replace the protective cap.
Забелешка: For best results, take multiple readings in different spots on the material and average them.
5. Одржување
- Чистење: Избришете го клокотот на мерачотasing with a dry, soft cloth. Do not use abrasive cleaners or solvents.
- Electrode Pins: Keep the pins clean and free from debris. If pins become dull or damaged, they may need replacement (replacement pins not included with standard package).
- Складирање: When not in use, always replace the protective cap over the pins. Store the meter in a cool, dry place, away from direct sunlight and extreme temperatures. Remove the battery if storing for extended periods to prevent leakage.
6 Смена на проблеми
| Проблем | Можна причина | Решение |
|---|---|---|
| Мерачот не се вклучува. | Мртва или неправилно инсталирана батерија. | Check battery installation. Replace with a new 9V battery. |
| Неточни читања. | Incorrect wood group selected; pins not fully inserted; pins dirty or damaged. | Ensure correct wood group is selected. Push pins firmly into the material. Clean or replace pins if necessary. |
| Екранот прикажува „Лоу“ или „Здраво“. | Moisture content is outside the meter's measurement range. | The material is either too dry or too wet for the meter to provide a specific reading. |
| Meter powers off unexpectedly. | Auto power off activated; low battery. | This is normal behavior after 15 minutes of inactivity. If it happens during use, check for low battery indicator and replace battery. |
7. Спецификации
| Параметар | Вредност |
|---|---|
| Приказ | Large LCD characters display |
| Принцип на мерење | Електричен отпор |
| Range (Wood) | 0% ~ 99.9% |
| Резолуција | 0.1% |
| Точност | ± 0.5% |
| Electrode Pin Length | 10 мм (0.4") |
| Electrode Pins | Интегриран |
| Автоматско исклучување | По прибл. 15 минути |
| Напојување | 1 x 9V 6F22 battery |
| Instrument Enclosures | ABS пластика |
| Работна температура | 0°C до 40°C (32°F до 104°F) |
| Работна влажност | 85% Relative Humidity Maximum |
| Димензии | 145 x 67 x 32 mm (5.7 x 2.6 x 1.3 инчи) |
| Тежина | 200 g (7.0 oz) |
Image 7.1: Visual summary of the EMT01's key technical specifications.
8. Гаранција и поддршка
This product is covered by a standard manufacturer's warranty. For specific warranty details, please refer to the documentation provided with your purchase or contact BSIDE customer support.
For technical assistance, troubleshooting, or inquiries about replacement parts, please contact BSIDE customer service through their official webлокацијата или продавачот на мало каде што е купен производот.