1. Вовед
This user manual provides detailed instructions for the installation, operation, and maintenance of your Feit Electric LED Utility Shop Light, model 917972. This versatile LED shop light is designed to provide bright, efficient illumination for various indoor spaces such as garages, basements, game rooms, utility rooms, workshops, cabinets, closets, and attics.

Figure 1: Feit Electric LED Utility Shop Light (Model 917972) packaging, highlighting its features and design.
2. Информации за безбедност
Ве молиме прочитајте ги и разберете ги сите безбедносни упатства пред да го инсталирате или ракувате со овој производ. Непочитувањето на ова може да резултира со електричен удар, пожар или други повреди.
- Секогаш исклучувајте го напојувањето пред инсталација или сервисирање.
- Do not install near heat sources or in wet locations. This product is designed for indoor use only.
- Осигурајте се дека површината за монтирање може да ја издржи тежината на држачот.
- Не гледајте директно во LED изворот на светлина кога е осветлен.
- Use only with 120V AC power supply.
- Ако надворешниот флексибилен кабел или кабел на оваа светилка е оштетен, тој исклучиво ќе биде заменет од производителот или неговиот сервисер или слично квалификувано лице за да се избегне опасност.
3. Содржина на пакетот
Проверете дали сите компоненти се присутни пред да започнете со инсталацијата:
- Feit Electric LED Utility Shop Light Fixture (Model 917972)
- Two (2) 6-inch (15 cm) Hanging Cables
- Two (2) Mounting Screws for flush mount installation
4. Поставување и инсталација
The Feit Electric LED Utility Shop Light offers two primary installation methods: hanging and flush mount.
4.1. Hanging Installation
- Identify the desired location for the shop light. Ensure it is near a power outlet.
- Attach the two 6-inch (15 cm) hanging cables to the designated slots on the top of the shop light fixture.
- Securely attach the other end of the hanging cables to a sturdy overhead structure (e.g., ceiling joists, chains, or hooks) using appropriate hardware (not included, unless specified in package contents). Ensure the fixture is level and stable.
- Plug the power cord into a standard 120V AC grounded outlet.
4.2. Flush Mount Installation
- Determine the exact mounting points on the ceiling or wall where the fixture will be installed. Mark these points accurately, ensuring they align with the mounting holes on the fixture.
- Drill pilot holes at the marked locations, if necessary, suitable for the provided mounting screws.
- Align the fixture's mounting holes with the pilot holes.
- Insert and tighten the two mounting screws to secure the fixture firmly against the surface. Do not overtighten.
- Plug the power cord into a standard 120V AC grounded outlet.
5. Упатства за работа
The Feit Electric LED Utility Shop Light is designed for simple operation.
- Once properly installed and plugged into a live 120V AC outlet, the light will illuminate instantly.
- To turn the light ON/OFF, use the wall switch connected to the outlet, or unplug the fixture from the outlet. Note: This fixture does not include an integrated ON/OFF switch or pull chain.
- The LED technology provides instant full brightness with no humming.
6. Одржување
The Feit Electric LED Utility Shop Light requires minimal maintenance.
- Чистење: Ensure the fixture is unplugged and cool before cleaning. Wipe the exterior with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- LED диоди: The integrated LED lights are designed for long life and are not replaceable. Do not attempt to open the fixture or replace the LEDs.
- Инспекција: Periodically inspect the power cord and connections for any signs of damage. If damage is found, discontinue use and contact customer support.
7 Смена на проблеми
If you experience issues with your shop light, refer to the following common problems and solutions:
| Проблем | Можна причина | Решение |
|---|---|---|
| Светлото не се вклучува. | No power to the outlet; fixture not properly plugged in; faulty outlet or wall switch. | Check if the outlet has power (test with another device). Ensure the plug is fully inserted. Check the circuit breaker. Verify the wall switch is ON. |
| Светлината трепери или затемнува. | Loose connection; incompatible dimmer switch (this fixture is not dimmable); voltagд флуктуации. | Ensure the plug is secure. Do not use with a dimmer switch. If flickering persists, consult an electrician. |
| Звуци од потпевнување. | Not applicable for this LED fixture. | This LED fixture is designed for no humming. If humming occurs, discontinue use and contact customer support. |
If the problem persists after trying these solutions, please contact Feit Electric customer support.
8. Спецификации
| Карактеристика | Детал |
|---|---|
| Бренд | Феит Електрик |
| Број на модел | 917972 |
| Тип на извор на светлина | LED |
| Температура на боја | 4100 келвини (кул бело) |
| Ватtage | 38 вати |
| Излез на светлина | 3700 лумени |
| Животни часови | 50,000 часа |
| Voltage | 120 волти (AC) |
| Материјал | Copper, Metal (Fixture) |
| Димензии на производот | 47 x 6 x 3 инчи |
| Тежина на ставката | 2.1 фунти |
| Внатрешна/надворешна употреба | Затворен |
| Тип на инсталација | Рамно монтирање, висечко |
9. Гаранција и поддршка
Feit Electric products are designed for durability and performance. This product is warrantied for five years from the date of purchase against defects in workmanship and materials. For warranty claims or technical support, please contact Feit Electric customer service.
Служба за корисници на Фејт Електрик:
- Webсајт: www.feit.com
- Телефон: Refer to the official Feit Electric webстраница за тековни контакт броеви.
Ве молиме зачувајте ја вашата сметка за купување како доказ за купување за целите на гаранцијата.





