Прирачници+

COTEK SP-1000-224

Cotek SP-1000-224 Pure Sine Wave Inverter User Manual

Model: SP-1000-224 | Brand: COTEK

1. Вовед

This manual provides detailed instructions for the installation, operation, and maintenance of the Cotek SP-1000-224 Pure Sine Wave Inverter. This inverter is designed to convert 24VDC power to 230VAC, providing a stable and reliable power source for various applications.

Клучни карактеристики:

  • Излез со чист синусен бран за чувствителна електроника.
  • Power ON / OFF remote control capability (Green Terminal).
  • Input & output fully isolated for enhanced safety.
  • Temperature & load controlled cooling fan for optimal performance.
  • Кориснички интерфејс.
  • Output frequency (50/60 Hz) selectable via DIP switch.
  • Излез волtage selectable via DIP switch.
  • Power saving mode adjustable via variable resistor.
  • 3-color LED status indicators for easy monitoring.
  • Comprehensive input protection: Reverse Polarity (Fuse), Under Voltage, Over Voltage.
  • Robust output protection: Short Circuit, Overload, Over Temperature.
  • Type 1 Indoor Aluminum Enclosure.
  • E13 / UL / CE / FCC approved.

2. Информации за безбедност

WARNING: Please read and understand all safety instructions before installing or operating this inverter. Failure to follow these instructions may result in electric shock, fire, serious injury, or death.

  • Електрична опасност: This unit produces high voltage. Do not open the inverter casing. Целото сервисирање обратете се на квалификуван персонал.
  • Безбедност на батеријата: Work in a well-ventilated area. Batteries can produce explosive gases. Do not smoke or allow sparks or flames near the battery.
  • Правилна вентилација: Ensure adequate airflow around the inverter. Do not block ventilation openings.
  • Еколошки услови: Do not expose the inverter to rain, moisture, or excessive dust. Operate in a dry, cool environment.
  • Заземјување: The inverter must be properly grounded. Follow all local and national electrical codes.
  • Капацитет на носивост: Do not exceed the inverter's rated power output. Overloading can cause damage to the inverter and connected devices.
  • Предлог Калифорнија 65 Предупредување: Овој производ може да содржи материјали за кои е предупредување од Калифорнискиот предлог 65.

3. Производот завршиview и Компоненти

Familiarize yourself with the various parts of your Cotek SP-1000-224 Pure Sine Wave Inverter.

Cotek SP-1000-224 Pure Sine Wave Inverter, angled view

Слика 3.1: Аголна view of the Cotek SP-1000-224 Pure Sine Wave Inverter, showing its blue aluminum casing and grey end caps with ventilation and connection ports.

Front panel of Cotek SP-1000-224 Inverter with AC outlet and controls

Слика 3.2: Front panel of the inverter, featuring the AC output socket (Schuko type), a power switch, LED indicators, and DIP switches for configuration.

Rear panel of Cotek SP-1000-224 Inverter with DC input terminals

Слика 3.3: Rear panel of the inverter, showing the DC input terminals for battery connection, a remote control port (RJ45), and a green terminal block for remote ON/OFF control.

Страна view of Cotek SP-1000-224 Inverter

Слика 3.4: Страна view of the inverter, highlighting its robust blue aluminum heat sink casing designed for efficient heat dissipation.

Cotek SP-1000 Series Inverter Features and Specifications Table

Слика 3.5: A detailed table outlining the features and technical specifications of the Cotek SP-1000 series inverters, including input/output parameters, protections, and certifications.

Cotek SP-1000 Series Inverter Mechanical Drawings and Performance Curves

Слика 3.6: Mechanical drawings providing dimensions of the inverter, along with power voltage and power temperature curves illustrating performance characteristics.

4. Поставување и инсталација

4.1 Choosing a Location:

  • Инсталирајте го инверторот на суво, ладно и добро проветрено место.
  • Избегнувајте директна сончева светлина, извори на топлина и влага.
  • Ensure sufficient clearance around the inverter for proper airflow, especially around the cooling fan and ventilation openings.
  • Mount the inverter securely on a stable, non-combustible surface.

4.2 DC Input Connection:

  1. Осигурајте се дека прекинувачот за напојување на инверторот е во положба OFF (исклучено).
  2. Connect the positive (+) terminal of the 24VDC battery bank to the positive (+) DC input terminal on the inverter.
  3. Connect the negative (-) terminal of the 24VDC battery bank to the negative (-) DC input terminal on the inverter.
  4. Use appropriately sized cables to minimize voltage drop and ensure safe operation. Refer to electrical standards for cable sizing.
  5. Проверете дали сите врски се цврсти и сигурни.

4.3 AC Output Connection:

  • Plug your AC appliances directly into the AC output socket on the inverter.
  • Ensure the total power consumption of all connected appliances does not exceed the inverter's 1000W continuous output rating.

4.4 Заземјување:

Proper grounding is essential for safety. Connect the inverter's chassis ground terminal to a reliable earth ground using a suitable grounding wire. Consult local electrical codes for specific grounding requirements.

4.5 Remote Control (Optional):

The inverter supports remote ON/OFF control via the green terminal block or an optional RJ45 remote control unit. Refer to the accessory manual for detailed instructions on connecting and using the remote control.

4.6 DIP Switch Configuration:

The inverter features DIP switches on the front panel to select output frequency (50/60 Hz) and output voltage. Refer to the table below for common settings. Ensure the inverter is OFF before changing DIP switch settings.

Табела 4.1: Прample DIP Switch Settings (Consult Figure 3.5 for full details)
ПоставувањеПозиција на прекинувачот DIP
Излезна фреквенција 50HzSwitch 1: OFF, Switch 2: OFF (Example, refer to actual product manual/Figure 3.5)
Излезна фреквенција 60HzSwitch 1: ON, Switch 2: OFF (Example, refer to actual product manual/Figure 3.5)
Излез Voltage 230 VACSwitch 3: ON, Switch 4: OFF (Example, refer to actual product manual/Figure 3.5)

Note: The exact DIP switch configurations for specific voltage and frequency settings are detailed in the product's full technical specifications (refer to Figure 3.5). Always verify settings before operation.

5. Операција

5.1 Powering On the Inverter:

  1. Ensure all DC and AC connections are secure and correct.
  2. If using the remote control, ensure it is connected and in the ON position.
  3. Flip the main power switch on the inverter's front panel to the "ON" position.
  4. Observe the 3-color LED status indicators. A green light indicates normal operation.

5.2 LED Status Indicators:

  • Зелена: Нормална работа.
  • Жолта/килибарна: Warning (e.g., input voltage slightly low/high, minor overload). The inverter may continue to operate but requires attention.
  • Црвено: Fault condition (e.g., severe overload, short circuit, over-temperature, critical input voltage). The inverter will shut down to protect itself and connected devices.

5.3 Power Saving Mode:

The inverter features a power saving mode, adjustable via a variable resistor. This mode reduces power consumption when no load or a very light load is detected. Adjust the resistor to set the sensitivity for entering/exiting power saving mode.

5.4 Powering Off the Inverter:

  1. Turn off all connected AC appliances.
  2. Flip the main power switch on the inverter's front panel to the "OFF" position.
  3. If using a remote control, turn it off as well.

6. Одржување

Редовното одржување обезбедува долготрајност и сигурно работење на вашиот инвертер.

  • Чистење: Периодично чистете ја надворешноста на инверторот со сува, мека крпа. Не користете течни средства за чистење или растворувачи. Осигурајте се дека отворите за вентилација се без прашина и остатоци.
  • Врски: Periodically check all DC and AC connections to ensure they are tight and free from corrosion. Loose connections can cause overheating and poor performance.
  • Вентилација: Ensure the cooling fan and ventilation grilles are not obstructed. The fan operates based on temperature and load, so ensure it can draw and expel air freely.
  • Здравје на батеријата: Monitor the health of your battery bank. A weak or failing battery can negatively impact inverter performance and lifespan.

WARNING: Do not attempt to service the inverter yourself. There are no user-serviceable parts inside. Refer all servicing to qualified personnel.

7 Смена на проблеми

This section provides solutions to common issues you might encounter with your inverter. If the problem persists after following these steps, contact customer support.

ПроблемМожна причинаРешение
Inverter does not turn on (No LED indication)
  • Loose DC connections
  • Blown DC input fuse
  • Волумен на батеријаtagе премногу ниско
  • Прекинувачот на инвертерот ИСКЛУЧЕН
  • Check and tighten DC cables.
  • Check and replace fuse if necessary (ensure correct rating).
  • Наполнете ја батеријата или проверете ја состојбата на батеријата.
  • Ensure inverter switch is ON.
Red LED is on, inverter shuts down
  • Преоптоварување
  • Short circuit at AC output
  • Прекумерна температура
  • Внесување над/под волtage
  • Намалете го поврзаното оптоварување.
  • Check AC wiring for shorts.
  • Оставете го инверторот да се олади; обезбедете соодветна вентилација.
  • Проверете ја јачината на батеријатаtage; осигурајте се дека е во рамките на работниот опсег.
Yellow/Amber LED is on
  • Minor overload
  • Влез волtage near limits
  • Намалете го оптоварувањето доколку е можно.
  • Монитор батерија voltage; ensure it's stable.
Нема излез за наизменична струја
  • Inverter not powered on
  • Fault condition (Red LED)
  • AC appliance issue
  • Check power switch and LED status.
  • Refer to "Red LED is on" solutions.
  • Test AC appliance with another power source.

8. Технички спецификации

The following table provides detailed technical specifications for the Cotek SP-1000-224 Pure Sine Wave Inverter. For a comprehensive overview, refer to Figure 3.5.

ПараметарValue (SP-1000-224)
МоделСП-1000-224
Излез наизменична струја Voltage230VAC (selectable)
DC Влез Voltage24 VDC
Континуирана моќност1000 W
Surge Power (3 sec)1750VA
Излезна бранова формаЧист синусен бран (THD <3%)
Излезна фреквенција50/60 Hz (се избира)
Ефикасност (макс.)92%
Влез под Voltagд Заштита21.0 ± 0.5VDC
Влез над волtagд Заштита33.0 ± 0.5VDC
Работна температура-20°C ~ +40°C (60% power load)
Димензии (Д x Ш x В)17 x 10 x 6 инчи (приближно)
Тежина8.94 фунти
СертификатиОдобрени E13 / UL / CE / FCC

Note: Specifications are subject to change without notice. Always refer to the product label or manufacturer's official documentation for the most accurate and up-to-date information.

9. Информации за гаранцијата

COTEK products are manufactured to high quality standards. For specific warranty terms and conditions, including duration and coverage, please refer to the warranty card included with your product or visit the official COTEK webстраница. Зачувајте го доказот за купување за гаранциски побарувања.

Typical warranties cover defects in materials and workmanship under normal use. Damage caused by improper installation, misuse, abuse, or unauthorized modifications is generally not covered.

10. Поддршка за корисници

If you have any questions, require technical assistance, or need to report an issue with your Cotek SP-1000-224 Pure Sine Wave Inverter, please contact COTEK customer support or your authorized dealer.

Кога контактирате со поддршката, ве молиме имајте ги следниве информации подготвени:

  • Product Model: SP-1000-224
  • Serial Number (if applicable, usually found on the product label)
  • Датум на купување
  • Детален опис на проблемот што го имате.

For the most up-to-date contact information, please visit the official COTEK webсајт: www.cotek.com.tw (Ова е резервирано место URL, please verify the actual manufacturer webстраница).