COTEK SP-1500-112

COTEK SP-1500-112 Pure Sine Wave Inverter User Manual

Model: SP-1500-112 | Brand: COTEK

1. Вовед

This manual provides essential information for the safe and efficient operation of your COTEK SP-1500-112 Pure Sine Wave Inverter. Please read this manual thoroughly before installation and use, and retain it for future reference. This inverter is designed to convert 12VDC battery power into 120VAC pure sine wave electricity, suitable for a wide range of sensitive electronic devices.

2. Информации за безбедност

Always observe the following safety precautions to prevent injury or damage to the inverter or connected equipment.

Image of a car battery with a recycling symbol, emphasizing battery safety.

This image illustrates the importance of battery safety, showing a car battery with a recycling symbol. Always handle batteries with care and ensure proper ventilation.

Image of a hard hat, safety glasses, and gloves, representing personal protective equipment.

This image depicts essential personal protective equipment including a hard hat, safety glasses, and gloves, highlighting the need for safety during installation and maintenance.

3. Карактеристики на производот

The COTEK SP-1500-112 inverter offers advanced features for reliable power conversion:

COTEK SP-1500-112 Pure Sine Wave Inverter, angled view showing the blue casing and front panel.

This image displays the COTEK SP-1500-112 Pure Sine Wave Inverter from an angled perspective, highlighting its blue casing and the front panel with outlets and controls.

4. Поставување и инсталација

Proper installation is crucial for the inverter's performance and safety. Follow these steps carefully:

4.1. Избор на локација

4.2. Приклучок за влез на еднонасочна струја

Connect the inverter directly to a 12VDC battery bank. Use appropriately sized cables to minimize voltagд капка.

  1. Осигурајте се дека прекинувачот за напојување на инверторот е во положба „OFF“.
  2. Connect the positive (+) DC cable from the battery to the positive (+) terminal on the inverter.
  3. Connect the negative (-) DC cable from the battery to the negative (-) terminal on the inverter.
  4. Tighten all connections securely to prevent loose contacts and arcing.
Заден дел view of the COTEK SP-1500-112 inverter showing the DC input terminals.

This image shows the rear panel of the inverter, detailing the DC input terminals (red for positive, black for negative) and the chassis ground connection point.

4.3. Приклучок за излез на наизменична струја

The inverter features dual GFCI 120VAC outlets for connecting your AC appliances.

  1. Plug your AC appliances directly into the GFCI outlets on the inverter's front panel.
  2. Ensure the total power consumption of all connected appliances does not exceed the inverter's rated output (1500W continuous).
Предна страна view of the COTEK SP-1500-112 inverter showing the dual GFCI AC outlets.

This image displays the front panel of the inverter, clearly showing the two GFCI protected AC output receptacles, the power switch, and LED indicators.

4.4. Remote Control Connection (Optional)

The inverter supports an optional remote ON/OFF control via the green terminal block.

5. Упатства за работа

5.1. Powering On the Inverter

  1. Ensure all DC and AC connections are secure.
  2. Flip the main power switch on the inverter to the "ON" position.
  3. Observe the LED indicators for status. A green LED typically indicates normal operation.

5.2. Разбирање на LED индикаторите

The inverter features 3-color LED status indicators:

5.3. Режим на заштеда на енергија

The inverter has an adjustable power saving mode. This mode reduces power consumption when no load or a very light load is detected. Consult the full technical datasheet for details on adjusting this setting via the variable resistor.

6. Одржување

Редовното одржување обезбедува долготрајност и оптимални перформанси на вашиот инвертер.

7 Смена на проблеми

This section provides solutions to common issues you might encounter with your inverter.

ПроблемМожна причинаРешение
Инверторот не се вклучува.No DC input power; Loose battery connections; Blown DC fuse; Inverter switch OFF.Проверете ја јачината на батеријатаtage; Tighten all DC connections; Replace fuse if necessary (refer to qualified technician); Ensure power switch is ON.
Inverter shuts down (Red LED).Преоптоварување; Претераност; Низок волумен на батеријатаtage; Short circuit on AC output.Reduce connected load; Allow inverter to cool down; Recharge/replace battery; Disconnect AC load and check for short circuit.
No AC output (Green LED ON).GFCI tripped; Faulty AC appliance; Loose AC connection.Press GFCI reset button; Test appliance on another AC source; Check AC plug connection.
Не работи вентилаторот за ладење.No load or light load (fan is load/temperature controlled); Fan malfunction.This is normal for light loads. If under heavy load and hot, contact support.

8. Спецификации

Detailed technical specifications for the COTEK SP-1500-112 Pure Sine Wave Inverter:

ПараметарВредност
Име на моделотСерија SP-1500
Ватtage1500 вати
Извор на енергијаНапојува со батерија
БрендCOTEK
Број на модел на ставкаСП-1500-112
Димензии на пакетот19.02 x 11.97 x 5.91 инчи
Тежина на ставката11.76 фунти
Гаранција2 годишен производител
Препорачана употребаВозило
Technical datasheet for COTEK SP-1500 series inverters, showing features and specifications.

This image presents the official technical datasheet for the COTEK SP-1500 series, detailing various models, electrical characteristics, protection features, environmental conditions, and certifications.

Mechanical drawings and dimensions for COTEK SP-1500 series inverters.

This image provides mechanical drawings and precise dimensions for the COTEK SP-1500 series inverters, useful for installation planning.

9. Гаранција и поддршка

The COTEK SP-1500-112 Pure Sine Wave Inverter comes with a 2 години гаранција на производителот.

For technical support, warranty claims, or service inquiries, please contact COTEK customer service. Refer to the official COTEK webстраница за најактуелни информации за контакт.

Препорачливо е да го регистрирате производот по купувањето за да се олесни гарантниот сервис.

Поврзани документи - СП-1500-112

Предview Упатство за користење на инвертер со чист синусен бран од серијата COTEK SP
Сеопфатно упатство за корисникот за инвертори со чист синусен бран од серијата COTEK SP (SP-700 до SP-4000). Дознајте повеќе за инсталацијата, работата, безбедноста, техничките спецификации и напредните функции како што се чист синусен бранов излез и робусна заштита.
Предview Упатство за користење на инвертер со чист синусен бран од серијата COTEK SP
Comprehensive user's manual for COTEK SP Series Pure Sine Wave Inverters (SP-700, SP-1000, SP-1500, SP-2000, SP-3000, SP-4000). Covers specifications, installation, operation, safety, and RS-232 communication for reliable power conversion.
Предview COTEK SK Series 1500W Pure Sine Wave Inverter User's Manual
Comprehensive user's manual for the COTEK SK Series 1500W Pure Sine Wave Inverter, covering safety, features, specifications, installation, operation, maintenance, and troubleshooting. Provides detailed guidance for proper use and care.
Предview Упатство за користење на инвертер за чист синусен бран од серијата COTEK SPT - SPT1200/2000/3000
Сеопфатно упатство за користење за инвертори од чисто синусоидно бранување од серијата COTEK SPT (SPT1200, SPT2000, SPT3000). Опфаќа безбедносни упатства, функционални карактеристики, спецификации, инсталација, одржување, RS-485 комуникација, решавање проблеми и информации за гаранцијата.
Предview Инвертер за чист синусен бран од серијата COTEK SPT со преносен прекинувач - вовед и спецификации на производот
Краток прегледview на инверторите за чист синусен облик од серијата COTEK SPT со преносен прекинувач, со детали за нивните технички спецификации, изгледот на производот, упатствата за инсталација и информациите за гаранцијата за различни модели.
Предview Упатство за користење на инвертер со чист синусен бран од серијата COTEK SK
Ова упатство за користење дава сеопфатни упатства за инверторите со чист синусен бран од серијата COTEK SK. Опфаќа основни информации за безбедноста, карактеристиките на производот, деталните електрични и механички спецификации, упатства за инсталација, оперативни процедури, чекори за решавање проблеми, совети за одржување и детали за гаранцијата за моделите SK700, SK1000, SK1500, SK2000 и SK3000.