1. Вовед
The Behringer UMC202HD is a 2-input, 2-output USB audio interface designed for recording microphones and instruments directly to your computer. It features Midas-designed mic preamplifiers and supports high-resolution audio up to 24-Bit/192 kHz, ensuring professional sound quality for your recordings.

Слика 1: напред view of the Behringer UMC202HD audio interface, showing inputs, gain controls, and output section.
2. Поставување
2.1 Инсталација на драјвери
Before connecting the UMC202HD, ensure you install the necessary drivers for your operating system (Windows or macOS). Drivers are typically available on the Behringer website. The device is compatible with popular recording software including Avid Pro Tools*, Ableton Live*, and Steinberg Cubase*.
2.2 Поврзување со компјутер
Connect the UMC202HD to your computer using a standard USB cable. The device is bus-powered, meaning it draws power directly from your computer via the USB connection.
2.3 Поврзување на микрофони и инструменти
Use XLR cables for microphones and 1/4-inch TRS cables for instruments (guitars, basses, keyboards) to connect to Input 1 and Input 2 on the front panel. Ensure the correct input type (Line/Inst) is selected via the switches above the gain knobs.
2.4 Connecting Headphones and Monitors
Plug your headphones into the 1/4-inch PHONES jack on the front panel. Connect your studio monitors to the 1/4-inch TRS outputs on the rear panel.
3. Operating the UMC202HD
3.1 Добијте контрола
Adjust the GAIN knobs for Input 1 and Input 2 to set the input level for your microphones or instruments. The CLIP and SIG LEDs indicate signal presence and clipping. Aim for a strong signal without clipping (red CLIP LED).
3.2 Фантомска моќност (+48V)
For condenser microphones, activate the +48V PHANTOM POWER switch located on the front panel. This supplies the necessary power to the microphone. Ensure your microphone requires phantom power before activating this feature.
3.3 Директен мониторинг
Engage the DIRECT MONITOR switch to hear your input signal directly through your headphones or monitors with zero latency. This is useful for monitoring your performance without delay from your computer's software.
3.4 Output Level Adjustment
Use the OUTPUT knob to control the overall volume of your studio monitors. The PHONES knob adjusts the volume for your headphones.
4. Клучни карактеристики
- Midas-Designed Preamps: Equipped with two world-class Midas-designed mic preamplifiers for exceptional audio quality.
- Аудио со висока резолуција: Supports 24-Bit/192 kHz converters for detailed and accurate sound reproduction.
- Следење со нулта латентност: Direct Monitor function allows for real-time monitoring of inputs without delay.
- Фантом моќ: +48V фантомско напојување за кондензаторски микрофони.
- Цврста конструкција: Features a "Built-like-a-tank", impact-resistant metal chassis for durability.
- Универзална компатибилност: Works with Windows and macOS operating systems and major DAWs.
5. Одржување
- Чистење: Користете мека, сува крпа за чистење на надворешноста на уредот. Избегнувајте течни средства за чистење или растворувачи.
- Животна средина: Operate the device in a clean, dry environment away from extreme temperatures, humidity, and direct sunlight.
- Управување со кабли: Ensure all cables are properly connected and not under strain to prevent damage to ports or cables.
6 Смена на проблеми
- Нема звук: Check all cable connections, ensure drivers are installed correctly, verify input/output selections in your DAW, and confirm volume levels on the UMC202HD and your computer.
- Искривен звук: Reduce input gain to prevent clipping (red CLIP LED), check for faulty cables, and ensure sample rate settings match between the device and your DAW.
- Уредот не е препознаен: Reconnect the USB cable, try a different USB port, ensure drivers are up-to-date, and restart your computer.
7. Спецификации
- Тежина на ставката: 1.19 фунти
- Димензии на производот: 9.92 x 6.22 x 3.46 инчи
- Број на модел на ставка: UMC202HD
- Компатибилни уреди: Лаптоп, персонален компјутер, таблет
- Хардверски интерфејс: USB
- Поддржан софтвер: Avid Pro Tools, Ableton Live, Steinberg Cubase
- Тип на материјал: Метал
- Оперативен систем: Windows, macOS
- Технологија за поврзување: USB
- Број на канали: 2
8. Што има во кутијата
- Behringer UMC202HD Audiophile 2x2, 24-Bit/192 kHz USB Audio Interface
9. Официјални видеа за производи
Видео со резиме на производот
Видео 1: Краток прегледview of the Behringer UMC202HD audio interface, highlighting its main features and design.
10. Гаранција и поддршка
The Behringer UMC202HD comes with a manufacturer's warranty. For detailed warranty information, technical support, or service inquiries, please refer to the documentation included with your product or visit the official Behringer webсајт.