Вовед
This manual provides essential instructions for the setup, operation, and maintenance of your Datalogic Heron HD3130-BK 1D Barcode Scanner. Please read this manual thoroughly before using the device to ensure proper functionality and longevity.
Содржина на пакетот
- Datalogic Heron HD3130-BK 1D Barcode Scanner
- Стенд за скенер
- (USB) Connection Cable (sold separately or included depending on package)
- Документација (овој прирачник)
Note: The connection cable is required for operation and may be sold separately.
Поставување
Follow these steps to set up your Datalogic Heron HD3130-BK barcode scanner:
- Распакувајте го скенерот: Carefully remove the scanner and its stand from the packaging.
- Соберете го штандот: If the stand is not pre-assembled, attach the scanner to the stand base according to the visual guide below. Ensure it is securely fastened.
- Поврзете го кабелот: Insert one end of the USB connection cable into the port at the base of the scanner. Connect the other end of the USB cable to an available USB port on your computer (desktop or laptop).
- Вклучување: The scanner is powered via the USB connection. Once connected, it should power on automatically.
- Инсталација на драјвер (ако е потребно): In most cases, the scanner will be recognized as a standard HID keyboard device and will not require specific driver installation. If prompted, follow your operating system's instructions for new hardware detection.
This image displays the Datalogic Heron HD3130-BK 1D Barcode Scanner in black, positioned on its included stand. The scanner features a sleek, ergonomic design, suitable for both handheld and presentation scanning.
Упатства за работа
The Datalogic Heron HD3130-BK is designed for efficient 1D barcode scanning. It supports both handheld and presentation modes.
Рачно скенирање
- Pick Up the Scanner: Remove the scanner from its stand.
- Насочи и скенирај: Point the scanner's window at the 1D barcode you wish to read. Ensure the red aiming line covers the entire barcode.
- Потврди скенирање: A successful scan is typically indicated by an audible beep and/or a visual confirmation (e.g., a green light). The scanned data will be transmitted to your connected computer as keyboard input.
Presentation Scanning (using the stand)
- Ставка за поставување: Position the barcode of the item in front of the scanner's window while it is in its stand.
- Автоматско откривање: The scanner will automatically detect and read the barcode when it is presented correctly within its field of view.
- Потврди скенирање: A successful scan is indicated by an audible beep and/or visual confirmation.
The scanner is capable of processing approximately 270 scans per second, ensuring quick and efficient data capture.
Одржување
Правилното одржување обезбедува долготрајност и оптимални перформанси на вашиот скенер.
- Чистење: Користете мека крпа без влакненца малку гampened with water or a mild, non-abrasive cleaner to wipe the scanner's exterior and scan window. Do not use harsh chemicals or abrasive materials.
- Складирање: When not in use, store the scanner in a clean, dry environment, away from direct sunlight and extreme temperatures.
- Грижа за кабел: Avoid bending or twisting the USB cable excessively. Ensure it is not pinched or placed under heavy objects.
Решавање проблеми
If you encounter issues with your Datalogic Heron HD3130-BK scanner, refer to the following common problems and solutions:
| Проблем | Можна причина | Решение |
|---|---|---|
| Скенерот не се вклучува. | USB кабелот не е поврзан или е неисправен. | Проверете дали USB кабелот е безбедно поврзан и со скенерот и со компјутерот. Обидете се со друг USB порт или кабел. |
| Скенерот не чита баркодови. | Barcode damaged, incorrect aiming, or scanner settings. | Ensure the barcode is clean and undamaged. Aim the red line directly across the barcode. Check if the scanner is configured for the specific barcode symbology (e.g., UPC-A, Code 39). |
| Скенираните податоци се прикажуваат неправилно. | Keyboard layout mismatch or scanner configuration. | Verify your computer's keyboard layout matches the scanner's configured output. Refer to the full product manual for advanced configuration options. |
| Скенерот дава звучен сигнал, но не се пренесуваат податоци. | Апликацијата не е во фокус или е неправилен интерфејс. | Ensure the cursor is in the desired input field of your application. Confirm the scanner is operating in HID keyboard emulation mode. |
For more detailed troubleshooting or advanced configuration, please refer to the comprehensive Datalogic Heron HD3130 product manual available on the official Datalogic webсајт.
Спецификации
| Карактеристика | Детал |
|---|---|
| Број на модел | HD3130-BK |
| Тип на скенер | 1Д скенер за баркодови |
| Стапка на скенирање | 270 скенирања/секунда |
| Технологија за поврзување | USB кабел |
| Извор на енергија | Електричен кабел (преку USB) |
| Компатибилни уреди | Десктоп, лаптоп |
| Тежина на ставката | 1.28 фунти (приближно 0.58 кг) |
| Димензии на производот | 7.5 x 8.8 x 4.1 инчи (приближно 19.05 x 22.35 x 10.41 см) |
| Производител | Даталогички |
| Глобален трговски идентификациски број (GTIN) | 05054629213858 |
Гаранција и поддршка
Datalogic products are designed for reliability and performance. For information regarding product warranty, please refer to the warranty statement included with your purchase or visit the official Datalogic webсајт.
For technical support, service, or to inquire about additional accessories, please contact Datalogic customer support through their official channels. You may need your product model number (HD3130-BK) and serial number (if applicable) when contacting support.
Онлајн ресурси: For the most up-to-date documentation, drivers, and software, please visit the Datalogic Official Webсајт.