1. Вовед
The Clearaudio Concept MM Turntable is an exceptional audio component designed to deliver high-fidelity sound reproduction from your vinyl records. Featuring an exclusive magnetic bearing system and a pre-mounted Classic MM cartridge, this turntable offers a refined and dynamic listening experience. Its robust construction, utilizing high-quality alloy and engineered wood, ensures stable and precise playback.
Главните карактеристики вклучуваат:
- Pre-mounted Classic MM (Moving Magnet) cartridge for immediate use.
- Exclusive magnetic bearing for ultra-low friction and smooth platter rotation.
- Belt-drive motor for stable speed and reduced vibrations.
- Integrated tonearm (CF tonearm) designed for optimal tracking.
2. Што има во кутијата
По распакувањето, проверете дали сите компоненти се присутни и во добра состојба:
- Clearaudio Concept MM Turntable unit
- Pre-mounted Classic MM cartridge/stylus
- Покривка за прав
- Power supply unit (with cable)
- Погонски ремен
- Питер
Ако некои предмети недостасуваат или се оштетени, ве молиме контактирајте го вашиот продавач веднаш.
3. Водич за поставување
Careful setup is crucial for optimal performance of your Clearaudio Concept MM Turntable.
3.1 Поставување
Choose a stable, level surface away from direct sunlight, heat sources, and strong vibrations. Ensure adequate ventilation around the unit.
3.2 Отпакување и склопување
- Gently remove the turntable from its packaging.
- Place the main plinth on your chosen surface.
- Carefully place the platter onto the spindle. The magnetic bearing system will guide it into place.
- Install the drive belt around the motor pulley and the inner rim of the platter.
- Ставете го капакот за прав над вртечката плоча.
3.3 Tonearm and Cartridge Adjustment
Your Clearaudio Concept MM Turntable comes with a pre-mounted Classic MM cartridge. While factory-set, fine-tuning may be required for optimal sound and stylus longevity.
- Сила за следење: The recommended tracking force for the Classic MM cartridge is typically around 2.0 grams. Due to the magnetic suspension, it is recommended to set the tracking force at the height of the platter for accurate readings. Use a digital stylus force gauge for precision.
- Анти-лизгање: The anti-skating adjustment is located underneath the base of the platter. This adjustment counteracts the inward force on the tonearm, ensuring even wear on the stylus and proper channel balance. Adjust it carefully while playing a record or using a test record.
- VTA (Vertical Tracking Angle) / Azimuth: These are typically factory-set for the pre-mounted cartridge. Refer to advanced setup guides if further adjustment is desired.
Слика 3.1: Готовоview of the Clearaudio Concept MM Turntable, showing the platter, tonearm, and speed selection knob.
3.4 Поврзување
Поврзете го грамофонот со вашиот аудио систем:
- Connect the RCA audio cables from the turntable's output to the "Phono MM" input on your amplifier or AV receiver. If your amplifier does not have a dedicated "Phono MM" input, you will need an external phono preampживописен.
- Поврзете ја жицата за заземјување од грамофонот со терминалот за заземјување на вашиот ampлафич или фоно предampразладувач за минимизирање на зуењето.
3.5 Поврзување за напојување
Connect the power supply unit to the turntable's power input, then plug it into a suitable wall outlet. Ensure the power switch is in the OFF position before connecting.
4. Упатства за работа
4.1 Вклучување/исклучување
Locate the power switch, typically integrated with the speed selection knob. Turn the knob to the desired speed (33, 45, or 78 RPM) to power on the turntable. Turn it to the 'Off' position to power off.
4.2 Избор на брзина
The Clearaudio Concept MM Turntable supports multiple playback speeds:
- 33 ⅕ RPM: For standard LPs (Long Play records).
- 45 вртежи во минута: For singles and some audiophile pressings.
- 78 вртежи во минута: For shellac records (requires a dedicated 78 RPM stylus, not included).
Select the appropriate speed using the control knob on the plinth.
4.3 Свирење на плоча
- Ставете запис на чинија.
- Select the correct playback speed.
- Подигнете ја тонераната рака користејќи ја рачката за покажување.
- Carefully position the tonearm over the desired starting groove of the record.
- Gently lower the cueing lever to allow the stylus to descend onto the record.
- Прилагодете ја јачината на звукот на вашиот ampживописен.
4.4 Запирање на репродукцијата
- Подигнете ја тонераната рака користејќи ја рачката за покажување.
- Вратете го тонерачот во мирување.
- Lower the cueing lever.
- Turn the speed selection knob to the 'Off' position to power down the turntable.
- Replace the dust cover to protect the turntable from dust.
5. Одржување
Regular maintenance will ensure the longevity and optimal performance of your turntable.
- Покривка за прашина: Always use the dust cover when the turntable is not in use to prevent dust accumulation on the platter, tonearm, and stylus.
- Cleaning the Plinth and Platter: Use a soft, dry, lint-free cloth to wipe down the plinth and platter. Avoid abrasive cleaners or solvents.
- Чистење на пенкалото: Gently clean the stylus regularly using a dedicated stylus brush or cleaning fluid. Always brush from back to front.
- Погонски ремен: Periodically inspect the drive belt for wear or stretching. Replace it if it appears loose or cracked, as this can affect speed stability.
- Замена на касети: The stylus (needle) of your cartridge will wear over time. Consult a professional or refer to the cartridge manufacturer's guidelines for replacement intervals.
6 Смена на проблеми
Еве некои вообичаени проблеми и нивните потенцијални решенија:
| Проблем | Можна причина | Решение |
|---|---|---|
| Нема звук или звукот е многу слаб | Избран е неточен внес на amplifier; cables loose; no phono preamplifier (if needed); ampЈачината на звукот на ладилникот е прениска. | Ensure "Phono MM" input is selected. Check all cable connections. Use a phono preamplifier if your amplifier lacks a dedicated phono input. Increase ampволумен на залажувачот. |
| Звуци од зуење или зуење | Ground wire not connected; poor cable shielding; proximity to other electronics. | Ensure ground wire is securely connected. Use high-quality shielded RCA cables. Move turntable away from other electronic devices. |
| Искривен звук или прескокнување | Incorrect tracking force; incorrect anti-skating; dirty stylus; damaged record; turntable not level. | Re-adjust tracking force (ensure measurement at platter height). Adjust anti-skating. Clean stylus. Inspect record for damage. Ensure turntable is perfectly level. |
| Неточна брзина на репродукција | Wrong speed selected; worn drive belt. | Verify the correct speed (33, 45, or 78 RPM) is selected. Inspect and replace the drive belt if necessary. |
If the problem persists, please contact your authorized Clearaudio dealer or support.
7. Спецификации
| Бренд | Клераудио |
| Име на моделот | Concept TP053 |
| Број на модел | CONCEPT MM TP053 |
| Технологија за поврзување | AUX |
| Компатибилни уреди | Amplifier, AV Receiver, Active Speakers, various audio components |
| Специјална карактеристика | MC System (Note: Product is MM, but system supports MC cartridges) |
| Вклучени компоненти | Cartridge/stylus, Dust cover |
| Тип на енергија | Жичен |
| Материјал | High-quality alloy or engineered wood |
| Боја | Црното |
| Тип на мотор | Мотор за погон на ремен |
8. Гаранција и поддршка
For warranty information, please refer to the documentation provided with your purchase or contact your authorized Clearaudio dealer. Clearaudio products are known for their quality and durability, and support is available through their official channels.
For technical assistance or service inquiries, please contact your local Clearaudio distributor or visit the official Clearaudio webсајт за детали за контакт.
