Полк Аудио Т50

Polk Audio T50 Floor Standing Tower Speaker Instruction Manual

Модел: T50

Бренд: Полк Аудио

Вовед

The Polk Audio T50 Floor Standing Tower Speaker is engineered to deliver powerful, high-performance sound for both home theater and stereo applications. Featuring Polk's Dynamic Balance technology, a 1-inch silk dome tweeter, a 6.25-inch composite driver, and two front-firing sub-bass radiators, the T50 provides crisp highs, detailed mids, and deep, impactful bass. It is designed to integrate seamlessly into most home theater receivers and stereos, supporting Dolby and DTS for an immersive audio experience.

Што има во кутијата

  • 1 x Polk Audio T50 Tower Speaker
  • 1 x решетка за звучник
  • Картичка за регистрација на гаранција

Поставување

Setting up your Polk Audio T50 Tower Speaker is designed to be straightforward. Follow these steps for optimal performance:

  1. Поставување: Position the tower speakers in your listening area, ensuring they are equidistant from your primary listening position for a balanced soundstage. For home theater setups, place them to the left and right of your television or projection screen.
  2. Врски: Connect the speaker wire from your AV receiver or stereo amplifier to the 5-way binding posts on the back of the T50 speaker. Ensure correct polarity (positive to positive, negative to negative) for optimal sound reproduction.
  3. Grille Attachment: The speaker grille can be attached magnetically to the front of the speaker for protection and aesthetic preference.
  4. Системска интеграција: The T50 speakers are timbre-matched with other Polk T-Series speakers, allowing for seamless integration into a larger surround sound system (e.g., with T15 surrounds and a T30 center channel).
Close-up of Polk Audio T50 speaker binding posts

Слика 1: Заден дел view of the Polk Audio T50 speaker showing the 5-way binding posts for easy and secure wire hookup.

Two Polk Audio T50 tower speakers flanking a TV in a living room

Слика 2: Прample placement of two Polk Audio T50 tower speakers in a home theater setup, demonstrating seamless sound integration.

Видео 1: Оверview of the Polk T-Series speakers, highlighting their design and features for home audio setups.

Оперативни

Once properly connected, your Polk Audio T50 speakers will operate in conjunction with your audio receiver or amplifier. Ensure your receiver is powered on and set to the correct input source. Adjust volume levels on your receiver. The T50 speakers are designed to reproduce a wide range of frequencies, providing clear audio for movies, music, and games.

Polk Audio T50 tower speaker in a modern living room setup

Figure 3: The Polk Audio T50 speaker integrated into a home audio environment, ready for use.

Одржување

To ensure the longevity and optimal performance of your Polk Audio T50 speakers, follow these simple maintenance guidelines:

  • Чистење: Gently wipe the speaker cabinets with a soft, dry cloth. Avoid using harsh chemicals or abrasive cleaners, which can damage the finish.
  • Нега на решетката: The speaker grilles can be carefully removed and dusted. If necessary, they can be gently vacuumed with a soft brush attachment.
  • Животна средина: Place speakers in a stable location away from direct sunlight, excessive heat, moisture, or extreme temperature changes. Ensure adequate ventilation around the speakers.
  • Врски: Периодично проверувајте ги поврзувањата на жиците на звучниците за да се осигурате дека се безбедни и без корозија.

Решавање проблеми

If you encounter issues with your Polk Audio T50 speakers, consider the following common troubleshooting steps:

  • Нема звук:
    • Verify that your AV receiver or ampОлабавувачот е вклучен и е избран точниот влезен извор.
    • Check all speaker wire connections at both the speaker and the receiver for proper polarity and secure contact.
    • Ensure the volume on your receiver is not muted or set too low.
  • Искривен звук:
    • Reduce the volume level on your receiver.
    • Check speaker wire connections for any loose strands that might be touching each other or the wrong terminal.
    • Ensure your receiver's impedance settings match the speaker's impedance (6 Ohms).
  • Нерамномерен звук:
    • Confirm that both speakers are connected with correct polarity.
    • Check speaker placement to ensure they are symmetrically positioned relative to your listening area.
    • Adjust the balance settings on your AV receiver.

Спецификации

КарактеристикаСпецификација
Тип на монтирањеПодолу
МатеријалДрво
Име на моделотТ50
Тип на звучникКула
Специјална карактеристикаHi-Res Audio, Multi-Room Audio
Препорачана употребаЗа системи за опкружувачки звук
Компатибилни уредиMost Home Theater AV Receivers
Дијаметар на сабвуфер6.5 инчи
Број на единици1.0 Брои
Конфигурација на каналот за опкружувачки звук2.1, 5.1
БојаЦрното
Димензии на производот7.75" Д x 8.75" Ш x 36.25" В
Тежина на ставката20.35 фунти
Импеданса6 оми
Максимален опсег7 метри
Контролен методДопрете
Големина на звучникот6.5 инчи
Извор на енергијаЕлектричен со кабел
Вуфер со дијаметар6 инчи
Дијаметар на високотонецот1 инчи
Тип на драјвер за аудиоДинамичен драјвер
Големина на драјвер за аудио6.25 инчи
Максимална излезна моќност на звучникот150 вати
Фреквентен одговор24000 Hz
Технологија за поврзувањеЖичен
Режим за излез на звукОпкружувачки
Dimensions of the Polk Audio T50 tower speaker

Figure 4: Detailed dimensions of the Polk Audio T50 Floor Standing Tower Speaker.

Гаранција

The Polk Audio T50 Floor Standing Tower Speaker comes with a Full Warranty. Please refer to the included Warranty Registration Card for specific terms, conditions, and registration details. Retain your proof of purchase for any warranty claims.

Поддршка

For further assistance, technical support, or service inquiries regarding your Polk Audio T50 speakers, please visit the official Polk Audio website or contact their customer service department. You can find contact information on the Warranty Registration Card or the brand's official webсајт.