1. Вовед
This manual provides detailed instructions for the installation, setup, operation, and maintenance of the Intermatic ST01 24-Hour In-Wall Timer. The ST01 is a heavy-duty digital timer designed for in-wall flush mounting, suitable for controlling various electrical loads including incandescent and fluorescent lighting. Please read this manual thoroughly before installation and use to ensure safe and proper operation.

Слика 1: напред view of the Intermatic ST01 24-Hour In-Wall Timer. This image displays the timer's digital LCD screen and control buttons, designed for flush mounting within a standard wall box.
2. Информации за безбедност
WARNING: Risk of Electric Shock. Installation requires working with high voltage wiring. Always turn off power at the circuit breaker or fuse box before installation or servicing. Installation should be performed by a qualified electrician or trained personnel.
- Не инсталирајте со влажни раце.
- Do not use in locations where it may be exposed to water or extreme humidity.
- Осигурајте се дека сите жичени врски се безбедни и се во согласност со локалните електрични кодови.
- This device is rated for 120-277V, 15A, 1800W. Do not exceed these ratings.
- Само за внатрешна употреба.
3. Содржина на пакетот
Проверете дали сите компоненти се присутни пред да започнете со инсталацијата:
- Intermatic ST01 24-Hour In-Wall Timer (1 unit)
- Монтирачки завртки (2 единици)
- Жични навртки (3 единици)
- Упатство за употреба (Овој документ)
4. Инсталација
Следете ги овие чекори за сигурна и правилна инсталација:
- Исклучете го напојувањето: Locate the circuit breaker or fuse that supplies power to the switch box where the timer will be installed. Turn off the power completely. Verify power is off using a voltagд тестер.
- Отстранете го постоечкиот прекинувач: Carefully remove the wall plate and unscrew the existing switch from the wall box. Disconnect the wires from the old switch, noting which wire was connected to which terminal (typically Line, Load, and Ground).
- Поврзете го тајмерот: The ST01 timer typically has three wires:
- Black (Line): Connect to the incoming hot wire from the circuit breaker.
- Red (Load): Connect to the wire going to the light fixture or appliance.
- Зелена (земја): Connect to the bare copper or green ground wire in the wall box.
- Монтирајте го тајмерот: Gently fold the wires into the wall box. Insert the timer into the wall box and secure it with the provided mounting screws.
- Инсталирајте ѕидна плоча: Attach a standard wall plate (not included) over the timer.
- Вратете ја моќноста: Вклучете го напојувањето повторно на прекинувачот или кутијата со осигурувачи.
Note: The ST01 is designed for flush mounting and requires a standard electrical wall box.
5. Почетно поставување и програмирање
При првото вклучување или по исклучување на напојувањетоtage, the timer's internal CR2 lithium battery maintains settings, but you may need to set the current time and program schedules.
- Поставете тековно време:
- Притиснете го ЧАСОВНИК копче.
- Користете го ЧАС и МИНУТА buttons to adjust the current time. The display operates in a 12-hour format (AM/PM).
- Притиснете ЧАСОВНИК повторно за да зачувате и да излезете.
- Program ON/OFF Schedules: The ST01 allows for multiple ON/OFF programs over a 24-hour period.
- Притиснете го ПРОГ копче. На екранот ќе се прикаже „1 ВКЛУЧЕНО“.
- Користете ЧАС и МИНУТА копчиња за да го поставите посакуваното време на вклучување за програмата 1.
- Притиснете ПРОГ повторно. На екранот ќе се прикаже „1 OFF“.
- Користете ЧАС и МИНУТА копчиња за да го поставите посакуваното време на исклучување за програмата 1.
- Repeat for additional programs (e.g., "2 ON", "2 OFF", etc.) as needed.
- Притиснете ЧАСОВНИК to save all programs and return to normal operation.
Refer to the timer's LCD display for visual cues during programming.
6. Ракување со тајмерот
Once programmed, the ST01 timer will automatically switch connected devices ON and OFF according to your set schedules. You can also manually override the timer:
- Рачно вклучување/исклучување: Притиснете го ПРИРАЧНИК button to cycle through ON, OFF, and AUTO modes.
- НА: The connected device will remain ON, overriding all programs.
- ИСКЛУЧЕНО: The connected device will remain OFF, overriding all programs.
- АВТОМАТ: The timer will operate according to the programmed schedules. This is the default operating mode.
- Random Mode (if available): Some models may include a random mode for security. Consult the specific model's features if this is desired.
7. Одржување
The Intermatic ST01 timer requires minimal maintenance:
- Чистење: Wipe the timer's surface with a soft, damp крпа. Не користете абразивни средства за чистење или растворувачи.
- Батерија: The internal CR2 lithium battery maintains time and program settings during power outages. This battery is typically long-lasting and not user-replaceable. If the display becomes dim or settings are lost frequently, professional servicing may be required.
- Инспекција: Periodically inspect the timer and wall plate for any signs of damage or loose connections.
8 Смена на проблеми
| Проблем | Можна причина | Решение |
|---|---|---|
| Екранот на тајмерот е празен. | Нема струја до тајмерот. | Check circuit breaker/fuse. Ensure wiring connections are secure. |
| Тајмерот не се вклучува/исклучува во програмираните времиња. | Incorrect programming or timer is in Manual ON/OFF mode. | Verify program settings. Ensure timer is in AUTO mode by pressing the ПРИРАЧНИК копчето додека не се прикаже „AUTO“. |
| Time or programs are lost after power outage. | Internal battery low or depleted. | The CR2 lithium battery is designed for long life. If this occurs frequently, the unit may require replacement or professional service. |
| Поврзаниот уред не се ВКЛУЧУВА/ИСКЛУЧУВА. | Faulty wiring, faulty load, or timer malfunction. | Verify wiring connections. Test the connected device directly. If issues persist, consult a qualified electrician. |
9. Спецификации
- Модел: ST01
- Тип: 24-Hour In-Wall Digital Timer
- Voltage: 120 - 277 В
- Ampгневот: 15 А
- Моќност: 1800 W
- Полјаци: 1
- Операција: ON/OFF, Digital, LCD Display
- Поставување време: 12-часовен формат
- Батерија: CR2 Lithium (for memory backup)
- Работна температура: 32°F до 104°F (0°C до 40°C)
- Монтирање: Исцртување на монтажа
- Димензии (вкупно): 2.75" H x 1.75" W x 1.46" D (70mm H x 44mm W x 37mm D)
- Боја: Бело
- Материјал: Метал
- Сертификати: CSA сертифициран
- Компатибилност: Incandescent, Fluorescent lighting
- Тежина на ставката: 8 унци (приближно 227 грама)
10. Гаранција и поддршка
For warranty information and technical support, please contact Intermatic customer service. Keep your purchase receipt as proof of purchase.
Интерматичка служба за корисници:
- Webсајт: www.intermatic.com
- Погледнете го официјалниот Intermatic webстраница за најактуелните информации за контакт и детали за гаранцијата.





