VEMER VJ79720000 TE 200 Stair Light Timer Instruction Manual

1. Производот завршиview

The VEMER VJ79720000 TE 200 is an electronic DIN rail mountable stair light timer designed for automatic control of lighting circuits. It features a two-position selector for either automatic timed operation or a permanent switch-on function. This device is particularly suitable for managing stairwell lighting, ensuring lights are switched on and off automatically.

Главните карактеристики вклучуваат:

• Напојување: 230 вак
• Опсег на време: Прилагодлив од 30 секунди до 20 минути
• Излез: 1 relay with exchange contact, rated at 16A
• Потекло: Произведено во Италија

2. Спецификации

3. Што има во кутијата

По отворањето на пакувањето на производот, треба да ги најдете следниве елементи:

• VEMER VJ79720000 TE 200 Stair Light Timer Switch
• Упатство за употреба

4. Dimensions and Physical Description

The VEMER TE 200 timer is designed for DIN rail mounting. Below are the detailed dimensions and views of the device to assist with installation planning.

Опис на сликата: This image displays a technical diagram of the VEMER VJ79720000 TE 200 Stair Light Timer. It includes three main sections: Front View Dimensions, Side View Dimensions, and Wiring Diagrams. The front view shows a width of 18mm. The side view indicates a height of 91mm and a depth of 65mm. These dimensions are critical for proper DIN rail installation and space allocation within an electrical panel.

5. Инсталација

Installation of the VEMER TE 200 timer should only be performed by a qualified electrician in accordance with local electrical codes and regulations. Ensure the main power supply is disconnected before commencing any installation work.

Монтажа на DIN железница

The device is designed for quick and secure mounting on a standard DIN rail within an electrical distribution board or enclosure.

Дијаграми за поврзување

Refer to the provided image for detailed wiring diagrams. The timer supports both 3-wire and 4-wire connection configurations. Ensure all connections are secure and correctly terminated.

Image Description (Wiring Diagrams Section): The right side of the image presents two wiring diagrams: 'Collegamento a 3 fili' (3-wire connection) and 'Collegamento a 4 fili' (4-wire connection). Both diagrams illustrate connections for Line (L), Neutral (N), the timer unit (with terminals 1, 2, 3, 4), push-button switches, and light fixtures. The 3-wire diagram shows L connected to the switches, which then connect to terminal 1. Terminal 2 connects to the lights, and terminal 3 connects to L. Terminal 4 also connects to the lights, with N directly connected to the lights. The 4-wire diagram shows a similar setup, but with terminal 2 connected to N, indicating a different control circuit configuration for the switches. Always follow the specific diagram that matches your installation requirements.

5.1. 3-Wire Connection

• Connect the Line (L) and Neutral (N) power supply to the designated terminals on the timer.
• Connect the Line (L) to one side of the push-button switches.
• Connect the other side of the push-button switches to terminal 1 of the timer.
• Connect terminal 2 of the timer to the light fixtures.
• Connect terminal 3 of the timer to the Line (L) supply.
• Connect terminal 4 of the timer to the light fixtures.
• Connect the Neutral (N) supply directly to the light fixtures.

5.2. 4-Wire Connection

• Connect the Line (L) and Neutral (N) power supply to the designated terminals on the timer.
• Connect the Line (L) to one side of the push-button switches.
• Connect the other side of the push-button switches to terminal 1 of the timer.
• Connect terminal 2 of the timer to the Neutral (N) supply.
• Connect terminal 3 of the timer to the Line (L) supply.
• Connect terminal 4 of the timer to the light fixtures.
• Connect the Neutral (N) supply directly to the light fixtures.

6. Упатства за работа

The VEMER TE 200 timer offers two primary operating modes, selected via a two-position switch on the device:

• Автоматски режим: In this mode, the timer operates according to the set timing duration. When a connected push-button switch is pressed, the lights will illuminate for the programmed period (30 seconds to 20 minutes) and then automatically switch off.
• Permanent Switch-on Mode: This mode allows the lights to remain continuously on, bypassing the timed function. This is useful for extended periods of illumination when automatic timing is not desired.

Приспособување на времето

The timing duration can be adjusted using the control on the front of the device, typically a rotary knob or similar mechanism. Set the desired time between 30 seconds and 20 minutes according to your application's needs.

Special Function: Extended Illumination

For temporary extended illumination, if a connected push-button switch is held down for approximately 5 seconds, the lights will remain on for an extended period of 60 minutes, overriding the standard programmed timing. Pressing the switch again will return the timer to its previously programmed automatic timing cycle.

7. Одржување

The VEMER VJ79720000 TE 200 Stair Light Timer is designed for reliable, long-term operation with minimal maintenance. No user-serviceable parts are contained within the unit.

• Чистење: Ensure the device remains free from dust and debris. Clean the exterior with a dry, soft cloth. Do not use liquid cleaners or solvents.
• Инспекција: Периодично проверувајте ги жичните врски за да се осигурате дека се цврсти и без корозија.

Секогаш исклучувајте го напојувањето пред да извршите какво било чистење или проверка.

8 Смена на проблеми

If you encounter issues with your VEMER TE 200 Stair Light Timer, consider the following troubleshooting steps:

• Без моќност: Check the main circuit breaker and ensure the power supply to the timer is active (230 Vac). Verify all power connections (L and N) to the timer.
• Светлата не се вклучуваат: Confirm that the timer is in 'Automatic Mode' and not 'Permanent Switch-on Mode'. Check the wiring to the push-button switches and the light fixtures. Ensure the light bulbs are functional.
• Неточен тајминг: Verify that the timing adjustment knob is set to the desired duration.
• Lights Stay On Permanently (unexpectedly): Check the operating mode selector. If the special extended illumination function was activated, press a switch again to return to timed operation.

If problems persist after performing these checks, it is recommended to consult a qualified electrician or contact VEMER customer support for further assistance.

9. Гаранција и поддршка

For detailed information regarding the product warranty, please refer to the official documentation provided by VEMER or visit the manufacturer's webлокација. Условите за гаранција може да се разликуваат во зависност од регионот и датумот на купување.

For technical support, service, or inquiries, please contact VEMER directly through their official channels. Keep your product model number (VJ79720000) and purchase information readily available when seeking support.