Wiltec Automatic Egg Incubator (8 Eggs) - Instruction Manual

1. Вовед

This manual provides detailed instructions for the safe and efficient operation of your Wiltec Automatic Egg Incubator, Model 51073. This incubator is designed for small-scale incubation of various poultry eggs, such as chicken and duck eggs, and can also be used for reptile eggs. It features automatic temperature control and an automatic egg turning system to ensure optimal hatching conditions.

Please read this manual thoroughly before initial use to ensure proper setup and operation, and retain it for future reference.

2. Инструкции за безбедност

• Ensure the incubator is placed on a stable, level surface away from direct sunlight, drafts, or extreme temperature fluctuations.
• Не го потопувајте инкубаторот или неговите електрични компоненти во вода или друга течност.
• Always unplug the incubator from the power outlet before cleaning or performing any maintenance.
• Чувајте го инкубаторот подалеку од дофат на деца и домашни миленици.
• Користете го само дадениот адаптер за напојување.
• Не блокирајте ги отворите за вентилација.
• Доколку забележите какво било оштетување, прекинете со употреба и контактирајте ја службата за корисничка поддршка.

3. Компоненти на производот

Familiarize yourself with the main components of your incubator:

• Top cover with control panel and heating element
• Transparent base/egg chamber
• Automatic egg turning mechanism
• Water trough for humidity
• Адаптер за напојување

Слика 1: Готовоview of incubator components, including the yellow top cover, transparent base, red egg turning tray, and power cord.

4. Упатства за поставување

1. Отпакувај: Внимателно извадете ги сите компоненти од пакувањето. Проверете дали има оштетувања.
2. Собери: Place the egg turning mechanism into the transparent base. Ensure it sits securely.
3. Додадете вода: Fill the water trough at the bottom of the transparent base with distilled water. Do not overfill. This provides humidity for incubation.
4. Ставете ги јајцата: Carefully place up to 8 fertilized eggs into the designated slots on the egg turning mechanism. Ensure they are positioned correctly.
5. Затвори го капакот: Place the top cover onto the transparent base, ensuring it is properly aligned and sealed.
6. Поврзете напојување: Plug the power adapter into the incubator's power input, then plug the adapter into a suitable electrical outlet.
7. Претходно загревање: Allow the incubator to pre-heat for at least 2-3 hours before placing eggs inside to stabilize the temperature.

5. Упатства за работа

5.1 Контролната табла е завршенаview

Image 2: Close-up of the incubator's control panel.

• Лед екран: Shows the current temperature inside the incubator.
• "Work" Indicator (Red LED): Свети кога грејниот елемент е активен.
• "Set" Indicator (Green LED): Illuminates when in temperature setting mode.
• "Set" Button: Press to enter temperature setting mode.
• Копче „+“: Ја зголемува поставената температура.
• Копче „-“: Ја намалува поставената температура.

5.2 Поставување температура

1. Притиснете го "Set" button once. The "Set" indicator will light up, and the temperature display will flash, showing the current set temperature.
2. Користете го "+" и „-“ buttons to adjust the desired incubation temperature (range: 25°C to 39.5°C).
3. Притиснете го "Set" button again to confirm the new temperature. The display will stop flashing and return to showing the current internal temperature.

Recommended incubation temperatures vary by species. Consult specific guidelines for the type of eggs you are incubating.

5.3 Автоматско вртење јајца

The incubator features an automatic egg turning system that gently rotates the eggs at regular intervals. This simulates natural brooding behavior and prevents the embryo from sticking to the shell.

• The egg turning mechanism operates automatically once the incubator is powered on.
• Важно: Approximately 3-4 days before the expected hatch date, the automatic egg turning function should be disabled. This allows the chicks to position themselves for hatching. To disable, simply remove the egg turning mechanism from the incubator or unplug its connection if accessible (refer to specific model instructions if a separate plug exists, otherwise remove the tray).

5.4 Управување со влажноста

Maintaining proper humidity is crucial for successful hatching.

• Regularly check the water level in the water trough at the bottom of the incubator.
• Refill with distilled water as needed. Avoid using tap water, as mineral deposits can affect performance.
• Humidity requirements vary during different stages of incubation and for different species. Adjust water levels accordingly.

6. Одржување и чистење

1. Чистење: After each incubation cycle, unplug the incubator and allow it to cool completely.
2. Remove the egg turning mechanism and the transparent base.
3. Избришете ги сите површини со рекламаamp cloth and a mild disinfectant solution. Ensure all parts are thoroughly dry before reassembly or storage.
4. Не користете абразивни средства за чистење или груби хемикалии, бидејќи тие можат да ја оштетат пластиката.
5. Складирање: Чувајте го инкубаторот на чисто и суво место кога не е во употреба.

7 Смена на проблеми

8. Спецификации

• Модел: 51073
• Капацитет: Up to 8 standard chicken eggs
• Температурен опсег: 25°C - 39.5°C (adjustable)
• Контрола на температурата: Автоматски
• Вртење јајца: Автоматски
• Контрола на влажност: Manual (via water trough)
• Прикажи: LED дисплеј за температура
• Димензии: 32 x 31.5 ​​x 30.51 cm (Д x Ш x В)
• Тежина: 1.4 кг
• Производител: WilTec

9. Гаранција и поддршка

For warranty information or technical support, please refer to the purchase documentation or contact Wiltec customer service directly. Keep your proof of purchase for any warranty claims.

Производител: WilTec
Референца за модел: 51073