Aetertek AT-918C

Aetertek AT-918C Waterproof Remote Dog Training Collar User Manual

Model: AT-918C

Вовед

This user manual provides detailed instructions for the safe and effective use of your Aetertek AT-918C Waterproof Remote Dog Training Collar. Please read this manual thoroughly before operating the device to ensure proper functionality and the well-being of your pet. This system is designed to assist in training dogs weighing from 15 to 150 pounds, offering 9 levels of shock, 1 vibration, and 1 sound correction.

Важни безбедносни информации

ВНИМАНИЕ!

Proper fit of the collar is crucial. A collar worn for too long or made too tight on the pet's neck may cause skin damage, often misidentified as burns. To prevent pressure necrosis and ensure your pet's safety and comfort, please follow these guidelines:

Овие чекори ќе помогнат вашето домашно милениче да биде безбедно и удобно. Милиони миленичиња се удобни додека носат контакти од не'рѓосувачки челик. Некои домашни миленици се чувствителни на притисок од контакт. Можеби по некое време ќе откриете дека вашето домашно милениче е многу толерантно кон јаката. Ако е така, може да опуштите некои од овие мерки на претпазливост. Важно е да продолжите со секојдневните проверки на областа за контакт. Ако се најдат црвенило или рани, прекинете ја употребата додека кожата не заздрави целосно.

Содржина на пакетот

Проверете дали сите артикли се присутни во вашиот пакет:

Aetertek AT-918C package contents including remote, collar, charger, and test light, all neatly arranged in a black carrying pouch.

Image: Complete package contents of the Aetertek AT-918C training system, showing the remote transmitter, receiver collar, charging cables, and accessories within its storage pouch.

Компонентите на производот завршиview

Aetertek AT-918C remote transmitter and receiver collar side-by-side.

Image: The remote transmitter and the receiver collar of the AT-918C system, showcasing their design and relative size.

Aetertek AT-918C remote transmitter with lanyard attached.

Image: The remote transmitter with its attached lanyard, providing a convenient way to carry the device.

Aetertek AT-918C receiver collar submerged in a glass of water, demonstrating its waterproof capability.

Image: The receiver collar fully submerged in water, illustrating its waterproof design for use in various environments.

Close-up of the Aetertek AT-918C receiver collar showing the charging port and contact points.

Слика: Детална view of the receiver collar, highlighting the charging port and the metal contact points that deliver stimulation.

Aetertek AT-918C receiver collar with orange strap.

Image: The receiver collar attached to its adjustable orange strap, ready for fitting on a dog.

Hand holding the Aetertek AT-918C remote transmitter, showing the charging port.

Image: A hand holding the remote transmitter, demonstrating its ergonomic design and the location of the charging port.

Водич за поставување

1. Полнење на уредите

Both the transmitter and receiver are rechargeable. Fully charge both units before first use. A full charge typically takes 2-3 hours.

2. Спарување на предавателот и приемникот

The units are usually pre-paired from the factory. If re-pairing is needed:

  1. Осигурајте се дека двата уреди се исклучени.
  2. Turn on the receiver by pressing and holding the power button until the indicator light flashes.
  3. Within 10 seconds, press and hold the power button on the transmitter until its indicator light flashes.
  4. Once paired, the receiver's light will stop flashing and remain solid, or indicate successful pairing.

3. Поставување на јаката

Proper fit is essential for effective and safe operation. The contact points must have direct contact with your dog's skin.

  1. Position the receiver on the dog's neck, centered below the chin.
  2. Adjust the strap so it is snug, but not too tight. You should be able to fit one finger comfortably between the strap and your dog's neck.
  3. Ако е потребно, исечете ја вишокот должина на ременот.

Упатства за работа

Функции на предавателот

The remote transmitter features dedicated buttons for each correction type, simplifying operation:

Режими на обука

The AT-918C offers multiple training modes to suit various behavioral issues:

Тестирање на функцијата за удар

To ensure the shock function is working, use the provided test bulb:

  1. Place the test bulb's metal wires across the receiver's contact points.
  2. Press the shock button on the transmitter. The test bulb should light up, indicating the shock function is active.

Одржување и нега

Упатство за решавање на проблеми

ПроблемМожна причинаРешение
Collar not working (no response)Low battery; Not paired; Out of range; Receiver off.Charge both units; Re-pair transmitter and receiver; Move closer to the dog; Turn on receiver.
Dog not responding to correctionCollar too loose; Contact points not touching skin; Intensity level too low; Dog is desensitized.Adjust collar fit; Ensure contact points are clean; Increase intensity gradually; Re-evaluate training approach.
Automatic bark function not working or erraticFeature is turned off; Collar not detecting barks properly; Malfunction.Ensure auto bark feature is enabled; Check collar fit and position; Contact support if issue persists.
Намален опсегEnvironmental interference; Low battery.Move to an open area; Charge both units.

Спецификации на производот

Гаранција и поддршка

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official Aetertek webлокација. Чувајте ја сметката како доказ за купување за гаранциски побарувања.

For additional resources and training tips, you may visit www.aetertek.com (Забелешка: Ова е резервирано место URL for demonstration purposes. Please refer to your product's actual support information).