Кросли C200

Crosley C200 Direct-Drive Turntable Instruction Manual

Model: C200A-BK

Вовед

This manual provides detailed instructions for the setup, operation, and maintenance of your Crosley C200 Direct-Drive Turntable. Please read this manual thoroughly before using the product to ensure proper function and longevity.

Важни безбедносни инструкции

Содржина на пакетот

Осигурајте се дека сите артикли наведени подолу се вклучени во вашиот пакет:

Компонентите завршијаview

Запознајте се со главните компоненти на вашиот грамофон.

Горе-надолу view of the Crosley C200 turntable with a record on the platter.
Слика 1: Од горе надолу View of Turntable. This image shows the overall layout of the Crosley C200 turntable from above, including the platter, tone arm, and controls.
Аголна view of the Crosley C200 turntable with a record playing.
Слика 2: Аголна View of Turntable. This image provides an angled perspective of the turntable, highlighting the S-shaped tone arm and the main unit.
Close-up of the direct drive platter mechanism.
Figure 3: Direct Drive Platter. Крупен кадар view illustrating the direct drive mechanism and the platter's spindle.
Close-up of the variably-weighted S-shaped tone arm.
Figure 4: S-Shaped Tone Arm. Детален view of the S-shaped tone arm, highlighting its design and counterweight area.
Заден дел view of the Crosley C200 turntable showing input/output ports.
Figure 5: Rear Connections. This image displays the rear panel of the turntable, showing the RCA output and phono/line switch.

Поставување

1. Инсталација на послужавник и погонски појас

  1. Carefully place the platter onto the center spindle.
  2. Locate the drive belt, which is pre-installed on the underside of the platter.
  3. Using the red ribbon attached to the drive belt, gently pull the belt over the motor pulley. Ensure the belt is not twisted.
  4. Remove the red ribbon.
  5. Ставете ја подлогата од филц врз послужавникот.

2. Tone Arm Assembly and Balancing

  1. Инсталирајте контратег: Slide the counterweight onto the rear of the tone arm with the numbers facing forward.
  2. Attach Head Shell: Carefully attach the head shell (with the Audio-Technica cartridge) to the end of the tone arm. Turn the locking nut until it is firmly in place.
  3. Отстранете го заштитникот за пенкало: Gently remove the clear plastic stylus protector from the cartridge.
  4. Unlock Tone Arm: Release the tone arm from its rest using the tone arm lock.
  5. Balance Tone Arm: Adjust the counterweight by rotating it until the tone arm floats parallel to the platter without touching it. The tone arm should be level.
  6. Постави сила за следење: Once balanced, hold the counterweight steady and rotate only the numbered ring to '0' on the center line. Then, rotate the entire counterweight counter-clockwise until the number '2' aligns with the center line. This sets the tracking force to 2 grams, which is optimal for the included cartridge.
  7. Комплет против лизгање: Locate the anti-skating dial near the tone arm base. Set this dial to '2' to match the tracking force.
  8. Lock Tone Arm: Return the tone arm to its rest and secure it with the tone arm lock.
Hand carefully placing the stylus onto a record.
Figure 6: Stylus Placement. Illustrates the careful handling of the tone arm and stylus when preparing to play a record.

3. Поврзување со аудио систем

  1. Connect the RCA output cables from the turntable to your ampзајакнувач или звучници со напојување.
  2. Use the PHONO/LINE switch on the rear of the turntable to select the appropriate output:
    • ФОНО: Користете ако вашиот amplifier has a dedicated phono input.
    • ЛИНИЈА: Користете ако вашиот amplifier has a standard auxiliary input or if connecting to powered speakers. The turntable's built-in pre-amplifier will be active.
  3. Поврзете го адаптерот за напојување со грамофонот, а потоа со ѕидниот штекер.

Упатства за работа

1. Репродукција на плоча

  1. Place a record on the platter. If playing a 45 RPM single, use the included 45 RPM adapter.
  2. Изберете ја точната брзина (33 1/3 или 45 вртежи во минута) користејќи го прекинувачот за избор на брзина.
  3. Unlock the tone arm from its rest.
  4. Подигнете ја рачката за сигнализирање за да ја подигнете тоналната рачка.
  5. Manually position the tone arm over the desired starting groove of the record.
  6. Gently lower the cueing lever to allow the stylus to descend onto the record.
  7. To stop playback, lift the cueing lever, return the tone arm to its rest, and lock it.

2. Bluetooth Connectivity (Built-In Receiver)

The Crosley C200 features a built-in Bluetooth receiver, allowing you to stream audio from a Bluetooth-enabled device to the turntable's output. This means you can use the turntable as a Bluetooth speaker for your phone or tablet.

  1. Проверете дали грамофонот е вклучен.
  2. Activate Bluetooth pairing mode on your external device (e.g., smartphone, tablet).
  3. Пребарај за "Crosley C200" in your device's Bluetooth settings and select it to pair.
  4. Once paired, audio from your device will play through the turntable's connected speakers/ampживописен.

Забелешка: The Bluetooth feature is for receiving audio до the turntable, not for transmitting audio од the turntable to Bluetooth speakers.

Одржување

1. Чистење на пенкалото

2. Чистење на грамофонот

3. Replacing the Stylus

The stylus should be replaced after approximately 300-500 hours of playback. Refer to the Audio-Technica cartridge manual for specific replacement instructions or consult a qualified technician.

Решавање проблеми

ПроблемМожна причинаРешение
Нема моќАдаптерот за напојување не е поврзан или штекерот не е активен.Проверете дали адаптерот за напојување е безбедно поврзан и дали штекерот е функционален.
Нема звук или низок волуменIncorrect PHONO/LINE switch setting; RCA cables not connected; ampОзвучувачите/звучниците се исклучени или јачината на звукот е ниска.Check PHONO/LINE switch. Ensure RCA cables are connected correctly. Turn on amplifier/speakers and adjust volume.
Прескокнување или искривен звукDirty record/stylus; incorrect tone arm balance/tracking force; turntable not level.Clean record and stylus. Re-balance tone arm and adjust tracking force/anti-skate. Place turntable on a stable, level surface.
Record speed incorrectIncorrect speed selected; drive belt issue.Select correct speed (33 1/3 or 45 RPM). Check if the drive belt is properly seated on the motor pulley and platter.
Проблеми со спарување со BluetoothУредот е предалеку; пречки; уредот не е во режим на спарување.Ensure device is within range. Turn off other Bluetooth devices. Put device in pairing mode and try again.

Спецификации

Гаранција и поддршка

For warranty information, please refer to the documentation included with your purchase or visit the official Crosley website. For technical support or service inquiries, please contact Crosley customer service.

Производител: Кросли

Прво достапен датум: 22 декември 2015 година

Официјални видеа за производи

Crosley C200 Direct-Drive Turntable Overview

Ова видео дава краток прегледview of the Crosley C200 Direct-Drive Turntable, showcasing неговиот дизајн и клучните карактеристики.

Crosley C200 Direct-Drive Turntable with S-Shaped Tone Arm, Black

A short video highlighting the Crosley C200 turntable, focusing on its S-shaped tone arm and black finish.