1. Вовед
This manual provides essential information for the proper installation, operation, and maintenance of your SRAM PG1050 11-26 10-Speed Cassette. Adhering to these instructions will ensure optimal performance and longevity of your bicycle drivetrain components. Please read this manual thoroughly before attempting any procedures.
2. Информации за безбедност
Always prioritize safety when working with bicycle components. Improper installation or maintenance can lead to serious injury or damage to your bicycle.
- Носете соодветна заштитна опрема, вклучувајќи заштита за очи и ракавици.
- Use correct tools for all procedures.
- If you are unsure about any installation or maintenance step, consult a professional bicycle mechanic.
- Ensure all components are clean and free of debris before assembly.
- Always check for proper function and secure fastening after any installation or adjustment.
3. Производот завршиview
The SRAM PG1050 11-26 10-Speed Cassette is designed for reliable and efficient gear shifting on 10-speed road and mountain bike drivetrains. It features a durable construction optimized for performance.
Клучни карактеристики:
- Steel Lockring: Ensures secure fastening to the freehub body.
- Forged Alloy Spider: Provides a lightweight yet strong foundation for the largest cogs.
- Heat Treated Steel Cogs: Offers durability and consistent shifting performance.
- Опсег на пренос: 11-26 teeth, suitable for various riding conditions.
Што има во кутијата:
- SRAM PG1050 11-26 10-Speed Cassette
Image: The SRAM PG1050 11-26 10-Speed Cassette, showing the individual cogs, the forged alloy spider, and the lockring with a 'Lock 40 Nm' torque specification.
4. Поставување и инсталација
Proper installation is crucial for the performance and safety of your cassette. If you are not confident in performing this procedure, seek assistance from a qualified bicycle mechanic.
Потребни алатки:
- Алатка за заклучување на касета
- Камшик со синџир
- Вртежен клуч
- Маст
Чекори за инсталација:
- Prepare the Freehub: Ensure the freehub body is clean and free of burrs. Apply a thin layer of grease to the freehub splines.
- Align the Cassette: The cassette cogs have a specific orientation. Align the wide spline on the cassette with the wide spline on the freehub body. Slide the cogs onto the freehub.
- Install the Lockring: Once all cogs are seated, thread the cassette lockring onto the freehub body by hand.
- Tighten the Lockring: Use the cassette lockring tool and a torque wrench to tighten the lockring to the specified torque of 40 Nm. This ensures the cassette is securely fastened and prevents movement during riding.
- Проверете за репродукција: After tightening, attempt to wiggle the cassette. There should be no lateral play.
5. Упатства за работа
The SRAM PG1050 10-speed cassette works in conjunction with a compatible 10-speed chain, rear derailleur, and shifters to provide a range of gear ratios.
- Менување: Use your shifters to move the chain between the different cogs on the cassette. Shift smoothly and avoid excessive force.
- Избор на брзина: Select appropriate gears for the terrain and your pedaling cadence. Avoid cross-chaining (using the largest chainring with the largest cog, or smallest chainring with the smallest cog) as this can increase wear and reduce shifting efficiency.
- Период на пробивање: New cassettes and chains may require a short break-in period. Shifting performance will typically improve after a few rides.
6. Одржување
Редовното одржување ќе го продолжи животниот век на вашата касета и ќе обезбеди конзистентни перформанси.
Чистење:
- Clean your cassette regularly, especially after riding in wet or dirty conditions.
- Use a degreaser and a stiff brush to remove grime from between the cogs.
- Rinse thoroughly and dry the cassette before lubricating the chain.
Инспекција:
- Periodically inspect the cogs for signs of wear, such as hooked teeth or thinning.
- Check your chain for wear using a chain wear indicator tool. A worn chain will accelerate cassette wear. Replace the chain before it becomes excessively stretched.
- Ensure the lockring remains tight.
7 Смена на проблеми
If you experience issues with your cassette, consider the following common problems and solutions:
| Проблем | Можна причина | Решение |
|---|---|---|
| Skipping gears | Worn chain, worn cassette cogs, improperly adjusted derailleur, loose cassette lockring | Check chain wear and replace if necessary. Inspect cassette for wear. Adjust rear derailleur. Tighten cassette lockring to 40 Nm. |
| Бучен погонски склоп | Dirty chain/cassette, insufficient lubrication, misaligned derailleur | Clean and lubricate chain and cassette. Check and adjust rear derailleur alignment. |
| Тешкотии при поместување | Cable tension issues, bent derailleur hanger, dirty/worn cables, worn chain/cassette | Adjust derailleur cable tension. Check derailleur hanger for straightness. Replace worn cables. Inspect chain and cassette for wear. |
If these steps do not resolve the issue, consult a professional bicycle mechanic.
8. Спецификации
| Карактеристика | Детал |
|---|---|
| Бренд | SRAM |
| Број на модел | 48-10-451 |
| Брзини на менувачот | 10-брзина |
| Опсег на брзини | 11-26 заби |
| Материјал | Heat Treated Steel Cogs, Forged Alloy Spider |
| Боја | Сребрена |
| Тежина на ставката | 0.35 килограми (приближно 12.35 унци) |
| Димензии на производот | 6 x 6 x 6 инчи |
| Lockring Torque | 40 Nm |
9. Гаранција и поддршка
SRAM products are manufactured to high standards and are backed by a limited warranty against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the official SRAM webстраница или контактирајте ја корисничката поддршка на SRAM.
For technical assistance, spare parts, or further information, please visit the official SRAM website or contact your local authorized SRAM dealer.
Официјален претставник на SRAM Webсајт: www.sram.com
