Упатство за употреба на индустрискиот скопметар Fluke 123/003

1. Вовед

This manual provides essential instructions for the safe and effective operation, setup, and maintenance of the Fluke 123/003 Industrial ScopeMeter. The Fluke 123/003 is a handheld electrical test device combining a two-channel digital oscilloscope with a true RMS digital multimeter, designed for industrial and commercial applications.

2. Што има во кутијата

Проверете дали сите артикли наведени подолу се присутни во вашиот пакет:

• Fluke ScopeMeter series 120 handheld oscilloscope/multimeter
• Set of test leads with mini clips and alligator clips
• BNC-to-banana adapter
• Rechargeable NiMH battery pack (installed)
• AC adapter/battery charger
• Упатство за употреба (овој документ)
• Optional: SCC120 kit (if purchased with kit), which includes:
  • ФлукView софтвер
  • RS-232/USB адаптер
  • Цврста торбичка за носење

Figure 1: Fluke 123/003 ScopeMeter with its standard accessories, including test leads, BNC-to-banana adapter, battery charger, and the main unit.

3. Производот завршиview

The Fluke 123/003 ScopeMeter is a versatile tool for electrical testing, combining the functionalities of a digital oscilloscope and a digital multimeter. It is designed for accurate measurement and analysis of electrical signals in various industrial settings.

Клучни карактеристики:

• Двојна функционалност: Combines a two-channel digital oscilloscope and a true RMS digital multimeter.
• Можности на осцилоскопот: Во реално време сample rate of 25MS/s, record length of 512 points per channel, automatic and cursor measurement parameters, edge and video triggers.
• Функции на мултиметар: Мери AC и DC волtage (up to 1,250V), resistance (up to 50MΩ), capacitance (up to 500µF), frequency (up to 50MHz), and duty cycle (2% to 98%).
• Вистински RMS: Provides accurate readings for both linear and non-linear loads.
• Прикажи: 2.83" monochrome LCD with 240 x 240 pixels resolution and backlight for low-light conditions.
• Складирање податоци: Internal memory for storing up to 10 setups and screenshots.
• TrendPlot: Chart recorder function for graphing minimum and maximum values over time.
• Поврзување: Optically isolated RS-232 interface for data transfer to a PC or printer.
• Стандарди за безбедност: Meets EN 61010-1:2001, ANSI/ISA S82.02.01, CAN/CSA C22.2 61010-1-04, and UL 61010-1-04 safety standards; CAT III 600V rated; CE marking.

4. Поставување

4.1. Напојување на уредот

The Fluke 123/003 operates on a rechargeable NiMH battery pack (pre-installed) or via the included AC adapter/charger.

• Работа со батерија: Ensure the NiMH battery pack is charged. The device will automatically shut down after 30 minutes of non-use to conserve battery life. A low-battery indicator will signal when recharging is needed.
• AC напојување: Connect the AC adapter/charger to the device and a standard 120V, 60Hz power outlet for continuous operation and battery charging.

4.2. Connecting Test Leads and Probes

Connect the appropriate test leads or probes to the input channels of the ScopeMeter based on your measurement requirements. Use the BNC-to-banana adapter as needed for specific connections.

• Insert the test leads into the input jacks.
• Ensure connections are secure before taking any measurements.
• For external triggering, an optical port is available for attaching a Fluke ITP120 probe (sold separately).

5. Упатства за работа

The Fluke 123/003 features an intuitive interface with drop-down menus for easy navigation. Refer to the on-screen prompts and the full user manual for detailed operational procedures.

5.1. Функција на осцилоскоп

• Стекнување на бранови форми: The oscilloscope acquires waveforms with a real-time sample rate of 25MS/s and a record length of 512 points per channel.
• Активирање: Utilize advanced automatic triggering, which recognizes signal patterns and optimizes triggering, timebase, and amplitude settings. Edge and video triggers are available for isolating specific signals.
• Мерења: Use automatic and cursor measurement parameters for in-depth waveform analysis.

5.2. Функција на мултиметар

• Режими на опсег: Select between manual ranging (user selects operating range) and auto ranging (device automatically selects appropriate range).
• Релативна функција: Set a measurement as a reference and display subsequent measurements as deviations.
• Touch-Hold Mode: Captures and holds a stable reading on the display.
• Функција за задржување на податоци: Freezes a reading on the display for documentation.
• Continuity and Diode Check: Use these functions to verify circuit conductivity and diode functionality.

5.3. Управување со податоци

• Складирање на податоци: Store up to 10 setups and screen shots in the internal memory.
• TrendPlot: Use the TrendPlot chart recorder to graph minimum and maximum values from both oscilloscope and multimeter functions over time. The recorder can be programmed for various time scales.
• PC/Printer Connection: Use the optically isolated RS-232 interface to connect to a compatible printer for direct data printing or to a PC for data storage and analysis (requires FlukeView software and RS-232/USB adapter, typically part of the SCC120 kit).

6. Одржување

6.1. Нега на батерии

To ensure optimal performance and longevity of the NiMH battery pack:

• Recharge the battery when the low-battery indicator appears.
• Use only the provided AC adapter/battery charger.
• The device features an automatic shutdown after 30 minutes of inactivity to preserve battery life.

6.2. Чистење

Исчистете ја надворешноста на уредот со мека, дamp крпа. Не користете абразивни средства за чистење или растворувачи.

6.3. Калибрација

Regular calibration ensures the accuracy of your ScopeMeter. Refer to the full user manual for recommended calibration intervals and procedures. An example of a calibration certificate is shown below.

Слика 2: Прample of a Certificate of Calibration, demonstrating the importance of regular calibration for measurement accuracy.

7 Смена на проблеми

For common operational issues, consult the comprehensive troubleshooting section in the full user manual. If you encounter problems not covered in the manual or require further assistance, please contact Fluke customer support.

Општи совети за решавање проблеми:

• Без моќност: Ensure the battery is charged or the AC adapter is properly connected.
• Неточни читања: Verify test lead connections, ensure correct measurement mode is selected, and check for proper calibration.
• Прикажи проблеми: Check backlight settings. If the display remains blank or faulty, contact support.

8. Спецификации

The following table outlines the key technical specifications for the Fluke 123/003 Industrial ScopeMeter:

Note: H is height, W is width, D is depth. These dimensions are not explicitly provided for the 123/003 model in the source data.

9. Информации за безбедност

Always adhere to safety precautions when operating electrical test equipment. The Fluke 123/003 ScopeMeter is designed and tested to meet stringent safety standards.

• Усогласеност: The unit meets European Standard (EN) 61010-1:2001, American National Standards Institute and International Society of Automation (ANSI/ISA) S82.02.01, CAN/CSA (Canadian Standards Association) C22.2 61010-1-04, and UL (Underwriters Laboratories) 61010-1-04 safety standards. It also carries CE (European Conformity) marking.
• Категорија на инсталација: Rated for CAT III installations to 600V. This covers equipment in fixed installations, such as switches in the fixed installation and some industrial equipment that is permanently connected to the fixed installation.
• Општа безбедност:
  • Не го користете уредот ако изгледа оштетен или работи ненормално.
  • Ensure all test leads and probes are in good condition and properly connected.
  • Почитувајте ги сите локални и национални безбедносни кодови.
  • Refer to the complete safety instructions in the full user manual before operation.

10. Гаранција и поддршка

Fluke Corporation manufactures electrical testing tools and software for industrial and commercial applications. For detailed warranty information, including terms and conditions, please refer to the warranty card included with your product or visit the official Fluke webсајт.

For technical support, service, or to order replacement parts, contact Fluke customer service. Contact information can typically be found in the full user manual or on the Fluke Corporation webсајт.

Производител: Fluke Corporation, headquartered in Everett, WA, USA.