Комплет за надворешна сонда Immergas 3.014083 Упатство за користење

1. Вовед

This user manual provides essential information for the installation, operation, and maintenance of the Immergas External Probe Kit, model 3.014083. This kit is designed to enhance the efficiency and performance of compatible Immergas heating systems by enabling sliding temperature operation.

2. Опис на производот

The Immergas External Probe Kit (Art. 3.014083) is an accessory for boilers under 35 kW, facilitating operation with a sliding temperature curve. This functionality allows the heating system to adjust its output based on the external ambient temperature, leading to improved energy efficiency and comfort. The probe is compatible with Immergas Magis Hercules ERP and Trio ERP boilers, particularly when the external probe supplied with Audax Top ERP heat pumps is to be excluded.

Слика 1: Крупен план view of the Immergas External Probe Kit, showing its compact design and the Immergas logo.

3. Поставување и инсталација

Installation of the Immergas External Probe Kit should be performed by a qualified technician to ensure correct wiring and optimal system integration. Incorrect installation may lead to system malfunction or safety hazards.

3.1 Поставување

• Mount the external probe on an exterior wall, away from direct sunlight, heat sources, or areas prone to strong winds.
• Ensure the probe is positioned to accurately measure the ambient outdoor temperature.

3.2. Wици

• Refer to the specific wiring diagrams provided with your Immergas boiler model for precise connection instructions.
• Connect the probe to the designated terminals on the boiler's control board.
• Осигурајте се дека сите приклучоци се безбедни и се во согласност со локалните електрични кодови.

3.3. Конфигурација на системот

• After physical installation, access the boiler's control panel to activate and configure the external probe function.
• Set the desired heating curve parameters according to the building's insulation and user preferences.

4. Упатства за работа

Once installed and configured, the external probe operates automatically. It continuously monitors the outdoor temperature and communicates this data to the boiler's control system. The boiler then adjusts the flow temperature of the heating water to match the current heat demand, optimizing energy consumption.

• The system will automatically adapt to changes in outdoor temperature, providing consistent indoor comfort.
• No manual intervention is typically required for the probe's operation after initial setup.
• For specific adjustments to the heating curve or system settings, consult your boiler's main user manual.

5. Одржување

The Immergas External Probe Kit requires minimal maintenance. Regular inspection is recommended as part of your heating system's annual service.

• Годишна инспекција: During your boiler's annual service, have a qualified technician inspect the probe for any physical damage or loose connections.
• Чистење: Ensure the probe's sensor area is free from dirt, debris, or insect nests that could obstruct accurate temperature readings. Use a soft, damp cloth for cleaning if necessary. Do not use abrasive cleaners.
• Фактори на животната средина: Periodically check that no new obstructions (e.g., growing vegetation, new structures) are interfering with the probe's ability to accurately sense outdoor temperature.

6 Смена на проблеми

If you suspect an issue with your external probe or the sliding temperature operation, consider the following:

• Неточни мерења на температурата: Check for physical obstructions around the probe or damage to the sensor. Ensure the probe is not exposed to direct sunlight or other heat sources.
• Системот не реагира: Verify that the probe's wiring connections are secure. Consult your boiler's display for any error codes related to the external probe.
• Heating Inconsistency: Review the heating curve settings in your boiler's control panel. Adjustments may be needed based on seasonal changes or building modifications.

For persistent issues, contact a qualified Immergas service technician. Do not attempt to repair the probe yourself.

7. Спецификации

8. Гаранција и поддршка

For information regarding the warranty period and terms for your Immergas External Probe Kit, please refer to the documentation provided with your original purchase or contact Immergas customer support directly. For technical assistance, troubleshooting beyond basic checks, or professional installation/repair services, please contact an authorized Immergas service center or a qualified HVAC technician.

Immergas Official Webсајт: www.immergas.com