Вовед
The Neoteck DTI Digital Indicator is designed for precise measurement of small linear distances in mechanical and industrial processes. This tool helps to verify tolerance levels during machine part inspection, making it an ideal instrument for mechanical, industrial, and laboratory applications. It features a large LCD screen for clear readings and offers high resolution for accurate measurements.
Figure 1: Neoteck DTI Digital Indicator
Карактеристики на производот
- Голем LCD дисплеј: Equipped with a 4-digit LCD screen for clear and easy-to-read measurements.
- Широк опсег на мерење: Capable of measuring from 0 to 25.4 mm (0 to 1 inch).
- Висока резолуција: Provides high precision measurements up to 0.01 mm (0.0005 inch).
- Конверзија на единица: Easily switch between millimeters (mm) and inches (in) for versatile use.
- Zero Setting Function: Allows for convenient zero calibration at any point.
- Removable Back Cover: Features a 6.5 mm hole diameter, allowing attachment to various magnetic base holder stands.
- Data Output Interface: Includes an RS232 data output interface for connectivity.
- Лесна замена на батеријата: Designed with an accessible SR44 battery compartment.
Figure 2: Digital Indicator Features
Поставување
- Инсталација на батерија: Locate the battery compartment on the back of the indicator. Insert one 1.5V SR44 button cell battery, ensuring correct polarity. Close the compartment securely.
- Attaching Back Cover: The indicator comes with a back cover. This cover can be attached to the rear of the unit. If using with a magnetic base, ensure the back cover is compatible or removed as needed. The 6.5mm hole allows for mounting on various stands.
- Монтирање (опционално): For stable measurements, it is recommended to mount the digital indicator onto a suitable stand, such as a magnetic base, using the provided back cover or directly if the stand supports it.
Figure 3: Storage Case and Batteries Included
Упатства за работа
- Вклучување/исклучување: Press the 'ON/OFF' button to turn the indicator on or off.
- Нулта поставка: Position the measurement probe at the desired reference point. Press the 'ZERO' button to set the display to zero. This allows for comparative measurements.
- Конверзија на единица: Press the 'inch/mm' button to switch between millimeter and inch units. The selected unit will be displayed on the LCD screen.
- Земање мерења: Gently lower the measurement probe onto the surface or into the feature to be measured. Read the value displayed on the LCD screen. Ensure the probe moves smoothly without excessive force.
- Излез на податоци: If connecting to a computer or data logger, use the RS232 data output interface. Refer to the specific software or device manual for connection and data transfer procedures.
Figure 4: Unit Conversion and Multiple Usages
Figure 5: Applications of the Digital Indicator
Одржување
- Чистење: Wipe the indicator with a soft, dry cloth. Avoid using solvents or abrasive cleaners, as they may damage the display or housing.
- Складирање: Store the indicator in its protective case when not in use to prevent dust accumulation and physical damage. Keep it in a dry environment, away from direct sunlight and extreme temperatures.
- Замена на батерија: When the display becomes dim or unresponsive, replace the SR44 button cell battery. Follow the battery installation steps outlined in the Setup section.
- Инспекција на сондата: Periodically check the measurement probe for any signs of wear or damage. A damaged probe can affect measurement accuracy.
Решавање проблеми
- Екранот не работи:
- Проверете дали батеријата е правилно инсталирана и дали е доволно наполнета. Заменете ја батеријата доколку е потребно.
- Ensure the 'ON/OFF' button has been pressed.
- Неточни читања:
- Ensure the 'ZERO' function has been properly used at the reference point.
- Check for any debris or obstruction on the measurement probe or the surface being measured.
- Verify that the indicator is securely mounted and stable during measurement.
- Ensure the probe is not bent or damaged.
- Unit Conversion Not Working:
- Press the 'inch/mm' button firmly. If the issue persists, try replacing the battery.
Спецификации
| Карактеристика | Спецификација |
|---|---|
| Мерен опсег | 0 - 25.4 mm (0 - 1 inch) |
| Резолуција | 0.01 mm (0.0005 инчи) |
| Брзина на одговор | ≤ 0.5 m/s |
| Работна температура | 0 ~ 40 ° C (32 ~ 104 ° F) |
| Температура на складирање | -20 ~ 70 ° C (-4 ~ 158 ° F) |
| Релативна влажност | ≤ 80 % R.H |
| Материјал | Алуминиумска легура |
| Извор на енергија | 1 x 1.5V SR44 Button Cell Battery (included) |
| Големина на ставка | Approx. 122 (L) x 55 (W) x 26 (D) mm (4.8 x 2.94 x 1.04 inches) |
| Тежина на ставката | Approx. 129 g (4.55 oz) (battery included) |
| Број на модел | NTK021 |
Слика 6: Димензии и компоненти на производот
Содржина на пакетот
Следниве ставки се вклучени во вашиот пакет:
- 1 x Neoteck DTI Digital Indicator
- 1 x Задна корица
- 1 x 1.5V SR44 Battery
- 1 x Упатство за употреба
Слика 7: Содржина на пакетот
Гаранција и поддршка
All Neoteck products come with an 18-month UK-based warranty. For technical support, troubleshooting assistance, or warranty claims, please refer to the contact information provided with your purchase or visit the official Neoteck webсајт.
