SSL02 All-Integrated Solar Light

1. Вовед

Thank you for choosing the SSL02 All-Integrated Solar Light. This product is designed to provide efficient and reliable outdoor lighting using solar power. It features an integrated solar panel, LED light source, and battery, along with intelligent control systems including a night sensor and motion sensor for optimal performance and energy saving. Please read this manual thoroughly before installation and operation to ensure proper use and longevity of your solar light.

2. Информации за безбедност

• Always handle the product with care. Avoid dropping or subjecting it to strong impacts.
• Do not attempt to disassemble or modify the solar light. This may void the warranty and cause damage or injury.
• Ensure the installation location is stable and secure to prevent the light from falling.
• Keep the solar panel clean to ensure maximum charging efficiency.
• Do not dispose of the battery in fire, as it may explode. Follow local regulations for battery disposal.
• Avoid direct eye exposure to the LED light when it is operating, as it is very bright.

3. Содржина на пакетот

Проверете го пакувањето за да се осигурате дека сите компоненти се присутни:

• 1 x SSL02 All-Integrated Solar Light unit
• 1 x далечински управувач
• Mounting hardware (bolts, nuts, washers)
• Упатство за употреба

4. Поставување и инсталација

The SSL02 solar light is designed for outdoor wall mount installation. Proper placement is crucial for optimal solar charging.

4.1 Избор на локација за инсталација

• Select a location that receives direct sunlight for at least 6-8 hours per day. Avoid areas shaded by trees, buildings, or other obstructions.
• Ensure the light is mounted at a height that allows for effective illumination of the desired area and proper motion sensor detection.
• The recommended mounting height is typically between 10-20 feet (3-6 meters) for optimal light distribution.

4.2 Инструкции за монтирање

1. Подгответе ја површината за монтирање: Ensure the wall or pole is sturdy enough to support the weight of the light.
2. Означете ги точките за дупчење: Користете го држачот за монтирање како шаблон за означување на позициите за дупчење дупки.
3. Дупчете дупки: Drill holes at the marked positions using an appropriate drill bit for your mounting surface (e.g., masonry bit for concrete, wood bit for wood).
4. Обезбедете ја заградата: Attach the mounting bracket to the wall or pole using the provided screws and anchors (if necessary). Ensure it is level and securely fastened.
5. Прикачете ја светлината: Carefully attach the SSL02 solar light unit to the secured mounting bracket using the provided bolts, nuts, and washers. Tighten all fasteners firmly to prevent movement.

This image displays the SSL02 All-Integrated Solar Light from a slightly elevated angle, mounted on a pole. The light features a long, rectangular silver housing with two distinct LED panels visible on its underside. The top surface appears to be the integrated solar panel. The mounting bracket is visible, securing the light to the pole.

4.3 Почетно полнење

After installation, allow the solar light to charge for at least 24-48 hours in direct sunlight before its first use. This ensures the replaceable Li-ion battery is fully charged and ready to provide optimal performance.

5. Упатства за работа

The SSL02 solar light operates automatically based on ambient light and motion detection. It can also be controlled via the included remote control.

5.1 Автоматско работење

• Night Sensor: Светлото автоматски ќе се вклучи во самрак и ќе се исклучи во зори.
• Сензор за движење: When motion is detected within its range at night, the light will illuminate at full brightness (2,000 Lumen Output). After a period of no motion, it will dim or turn off depending on the selected mode.

5.2 Функции на далечинскиот управувач

The remote control allows you to select different operating modes and manually control the light.

• ВКЛУЧЕНО/ИСКЛУЧЕНО: Рачно вклучете или исклучете го светлото.
• Mode 1 (Motion Sensor + Dim): Light stays dim at night and brightens to full output when motion is detected.
• Mode 2 (Motion Sensor Only): Light stays off at night and turns on to full output when motion is detected, then turns off after a set period of no motion.
• Mode 3 (Constant Light): Light stays on at a constant brightness throughout the night (brightness level may be adjustable depending on model variant). This mode consumes more battery power.
• Поставки на тајмерот: Some models may offer timer settings (e.g., 2H, 4H, 6H) to keep the light on for a specific duration after dusk, regardless of motion.

Note: Refer to the remote control's specific button labels for exact functionality. Ensure the remote control has working batteries.

6. Одржување

Regular maintenance ensures the optimal performance and extends the lifespan of your SSL02 solar light.

• Исчистете го соларниот панел: Периодично бришете ја површината на соларниот панел со мека, дamp крпа за отстранување прашина, нечистотија, лисја или снег. Чистиот панел обезбедува максимална апсорпција на сончева светлина и ефикасност на полнење.
• Проверете ја монтажата: Annually inspect the mounting hardware to ensure it remains secure and free from corrosion. Tighten any loose bolts.
• Замена на батерија: The SSL02 features a replaceable Li-ion battery. If the light's performance significantly degrades over time (e.g., shorter illumination duration), the battery may need replacement. Consult a qualified technician or contact customer support for guidance on battery replacement.
• Фактори на животната средина: In areas with heavy snowfall or extreme weather, ensure the light is not obstructed or damaged. Clear snow from the solar panel promptly.

7 Смена на проблеми

If you encounter issues with your SSL02 solar light, refer to the following common problems and solutions:

Ако проблемот продолжи откако ќе ги испробате овие решенија, контактирајте ја корисничката поддршка.

8. Спецификации

9. Гаранција и поддршка

Овој производ доаѓа со стандардна гаранција од производителот. Ве молиме погледнете ја гарантната картичка вклучена во вашиот пакет за специфични услови, вклучувајќи го гарантниот период и деталите за покритието.

Поддршка за корисници

For technical assistance, troubleshooting not covered in this manual, or warranty claims, please contact our customer support team. Have your product model number (SSL-02) and purchase information ready when contacting support.

Контакт информации (на пр., webстраница, е-пошта, телефонски број) обично би биле наведени овде од производителот.