Вовед
This manual provides comprehensive instructions for the safe and effective use of your Bytech Universal Car Mount. Designed for convenience and stability, this mount securely holds your smartphone in your vehicle, allowing for hands-free navigation and communication. Please read this manual thoroughly before installation and use.
Информации за безбедност
Always prioritize safe driving. Do not adjust the mount or your device while driving. Ensure the mount is securely installed and does not obstruct your view of the road, airbags, or vehicle controls. Avoid placing the mount in direct sunlight for extended periods, as this may affect its material integrity or the device mounted.
Поставување
1. Избор на локација за инсталација
Select a flat, clean, and smooth surface on your windshield or dashboard. Ensure the chosen location does not interfere with your driving visibility, vehicle controls, or airbag deployment. Clean the surface thoroughly before installation.
2. Attaching the Mount
- Press the suction cup firmly against the chosen surface.
- Flip the lever on the base of the suction cup down to create a vacuum seal, securing the mount in place.
- Verify the mount is stable and does not wobble.
3. Adjusting the Mount Angle
Loosen the adjustment knob located on the arm of the mount. Position the arm and cradle to your desired viewing angle. Tighten the knob firmly to lock the angle in place.
Image: The Bytech Universal Car Mount, showcasing its suction cup base, adjustable arm, and spring-loaded phone cradle with red gripping pads. This image illustrates the overall design and components of the mount.
Оперативни
1. Вметнување на вашиот паметен телефон
Нежно одвојте го спојката со пружинаamps of the cradle. Carefully place your smartphone into the cradle, ensuring it is centered and held securely by the clamps. The red gripping pads provide a firm hold without scratching your device.
2. Removing Your Smartphone
To remove your smartphone, gently pull apart the spring-loaded clamps and lift your device out of the cradle.
Одржување
Чистење
To clean the mount, wipe it with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners, as these may damage the materials. For the suction cup, periodically clean it with warm, soapy water and let it air dry to maintain its adhesive properties.
Складирање
When not in use for extended periods, detach the mount from the surface and store it in a cool, dry place away from direct sunlight.
Решавање проблеми
| Проблем | Можна причина | Решение |
|---|---|---|
| Mount not sticking to surface. | Surface is dirty, uneven, or suction cup is dirty/damaged. | Clean the surface and the suction cup. Ensure the surface is flat. If damaged, replace the mount. |
| Phone not held securely. | Phone is too large/small for the cradle, or clamps are worn. | Ensure your phone fits within the cradle's dimensions. If clamps are worn, the mount may need replacement. |
| Mount wobbles after installation. | Adjustment knob is loose, or suction cup is not fully sealed. | Tighten the adjustment knob. Re-attach the suction cup, ensuring the lever is fully engaged. |
Спецификации
- Модел: BYMOMO102BK
- Бренд: Bytech
- Димензии на производот: 1 x 1 x 1 инчи (приближно)
- Тежина на ставката: 2.1 унци
- Боја: Црното
- Посебни карактеристики: Прилагодлив
- Компатибилни уреди: Паметни телефони
- Тип на монтирање: Vehicle Mount (Suction Cup)
- Земја на потекло: Кина
Гаранција и поддршка
For warranty information or technical support, please refer to the contact details provided with your product packaging or visit the official Bytech webсајт. Чувајте ја вашата потврда за купување за барања за гаранција.
