Вовед
Thank you for choosing the Steinel RS 16 LED Ceiling Light. This advanced indoor luminaire features an integrated 360-degree high-frequency motion sensor, providing reliable and automated lighting for various indoor spaces. Designed for energy efficiency and convenience, the RS 16 LED offers a luminous flux of 930 lumens with a low power consumption of just 9.5 watts, potentially saving up to 90% on electricity costs compared to traditional lighting.
Its simple, round design with a PMMA plastic cover ensures ambient light diffusion, making it ideal for hallways, entrance areas, and stairwells. This manual will guide you through the installation, operation, and maintenance of your new Steinel RS 16 LED light.
Figure 1: Steinel RS 16 LED Ceiling Light in a hallway setting.
Поставување и инсталација
Before beginning installation, ensure the main power supply is switched off to prevent electrical hazards. Installation should be performed by a qualified electrician in accordance with local wiring regulations.
Содржина на пакетот:
- 1 x Steinel RS 16 LED Indoor Luminaire with LED system
- 1 x Додатоци за монтирање (завртки, ѕидни приклучоци)
Чекори за монтирање:
- Подгответе ја површината за монтирање: Choose a suitable location on the ceiling or wall. Ensure the surface is flat and stable.
- Означете ги точките за дупчење: Use the mounting plate of the luminaire as a template to mark the drilling points on the surface.
- Дупчете дупки: Издупчете дупки на означените места и вметнете ги приложените ѕидни приклучоци.
- Поврзете жици: Connect the electrical wires from the ceiling/wall to the luminaire's terminal block. Ensure correct polarity (Live, Neutral, Earth).
- Обезбедете го светилката: Attach the luminaire to the mounting surface using the provided screws.
- Прикачете го дифузерот: Securely fasten the PMMA plastic diffuser cover to the luminaire body.
Figure 2: Technical drawing with dimensions (280mm diameter, 110mm depth) and mounting points.
Figure 3: The RS 16 LED light illuminating a staircase.
Упатства за работа
The Steinel RS 16 LED features a high-frequency motion sensor that detects movement across a 360-degree area, even through glass, wood, and light walls. This allows the light to activate automatically before you even enter the room.
Прилагодување на поставките:
The following settings can be adjusted using a small slotted screwdriver on the control dials located on the luminaire's base (refer to the product diagram for exact location):
- Reach/Range: Adjust the detection range from approximately 3 meters to 8 meters in diameter. This controls how far the sensor detects movement.
- Twilight Setting (Lux): Set the ambient light level at which the sensor becomes active. This can be adjusted from 2 lux (dark) to 2000 lux (daylight). The light will only activate when the ambient light falls below this set threshold.
- Времетраење на осветлувањето: Determine how long the light remains on after motion is detected and no further motion is registered.
Networking Feature:
The RS 16 LED supports networking with up to 10 other compatible Steinel indoor luminaires. This feature allows multiple lights to switch on simultaneously when motion is detected by any networked unit, providing seamless illumination for long corridors, large stairwells, or open-plan areas.
Figure 4: Key features and specifications of the RS 16 LED.
Одржување
The Steinel RS 16 LED is designed for long-term, low-maintenance operation. The integrated LED system has an average lifespan of 50,000 hours, reducing the need for frequent bulb replacements.
Чистење:
To clean the luminaire, gently wipe the surface with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the plastic cover or electronic components. Ensure the power is off before cleaning.
Замена на извор на светлина:
This product contains a light source. Luminaires containing light sources can be disassembled to separately verify the contained light source(s). This product contains a light source of energy efficiency class E. For any issues with the integrated LED system, please contact Steinel customer support or a qualified electrician.
Решавање проблеми
If you encounter issues with your Steinel RS 16 LED light, please refer to the following common problems and solutions:
| Проблем | Можна причина | Решение |
|---|---|---|
| Светлото не се вклучува. | No power supply, twilight setting too high, sensor range too low. | Check power connection. Adjust twilight setting to a lower lux value. Increase sensor range. |
| Светлината останува постојано вклучена. | Continuous motion in detection area, lighting duration set too long, faulty sensor. | Ensure no constant motion. Reduce lighting duration. If problem persists, contact support. |
| Light turns on without apparent motion. | Sensor sensitivity too high, environmental factors (e.g., drafts, small animals). | Reduce sensor range/sensitivity. Ensure proper installation away from strong air currents. |
| Светлината трепери. | Нестабилно напојување, лабави жици. | Check electrical connections. Consult an electrician if power supply is unstable. |
If these solutions do not resolve the issue, please contact Steinel customer support.
Спецификации
| Карактеристика | Детал |
|---|---|
| Бренд | Штајнел |
| Број на модел | 008383 |
| Димензии (Д x Ш x В) | 28 x 28 x 11 cm |
| Тежина | 380 грама |
| Оценка за IP | IP44 |
| Стил | Detector, LED, PMMA plastic cover |
| Боја | Бело |
| Материјал | Пластика |
| Voltage | 230 волти |
| Посебни карактеристики | Детектор на движење |
| Тип на сијалица | LED (интегрирана) |
| Светлосен флукс | 930 lm |
| Потрошувачка на енергија | 9.5 вати |
| Температура на боја | 4000 Келвини (неутрално бело) |
| Индекс на рендерирање на бои (CRI) | 80 |
| Просечен животен век | 50,000 часа |
| Тип на сензор | High-frequency 360° presence sensor |
| Опсег на откривање | 3-8 meters (diameter) |
| Twilight Setting | 2-2000 лукс |
| Тип на инсталација | Монтирање на таванот |
| Употреба | Затворен |
Гаранција
Steinel provides a 3-year manufacturer's warranty for the RS 16 LED Ceiling Light. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. For detailed warranty terms and conditions, please visit the official Steinel webсајт или контактирајте со нивната служба за корисници.
Поддршка
For further assistance, technical support, or to inquire about spare parts, please contact Steinel customer service. You can find contact information on the official Steinel webсајт или преку вашиот локален продавач.
Steinel GmbH
Webсајт: www.steinel.de
