Reflecta Combo Album SCAN 64400 Scanner User Manual

1. Вовед

This manual provides essential instructions for the safe and efficient operation of your Reflecta Combo Album SCAN 64400 Scanner. Please read this manual thoroughly before using the device to ensure proper setup, usage, and maintenance. Keep this manual for future reference.

2. Информации за безбедност

To prevent damage to the device or injury to yourself, observe the following safety precautions:

• Само надворешна употреба: This device is designed for scanning photos, film, and slides. Do not attempt to use it for any other purpose.
• Извор на енергија: Use only the power adapter supplied with the scanner. Ensure the voltage одговара на вашето локално напојување.
• Вентилација: Do not block ventilation openings. Ensure adequate airflow around the scanner to prevent overheating.
• Изложеност на течност: Keep the scanner away from water and other liquids. Do not operate the device with wet hands.
• Чистење: Исклучете го од струја пред чистење. Користете мека, сува крпа. Не користете течни или аеросолни средства за чистење.
• Расклопување: Do not attempt to disassemble or repair the scanner yourself. Refer all servicing to qualified service personnel.
• Деца: Чувајте го уредот подалеку од дофат на деца.

3. Содржина на пакетот

Проверете дали сите артикли се присутни во пакувањето:

• Reflecta Combo Album SCAN 64400 Scanner Unit
• Адаптер за напојување
• USB кабел
• Film Holder (for 35mm film strips)
• Slide Holder (for mounted 35mm slides)
• Четка за чистење
• Упатство за употреба (овој документ)

4. Производот завршиview

Familiarize yourself with the components of your scanner.

Слика 4.1: Предна страна view of the Reflecta Combo Album SCAN 64400 Scanner, showing the display screen, control buttons, and input slots for photos and film.

Слика 4.2: The scanner unit displayed with its included film holder and a small cleaning brush, essential accessories for film and slide scanning.

4.1. Компоненти на скенерот

• Копче за вклучување: Turns the scanner on/off.
• LCD дисплеј: Shows scan preview, menu options, and settings.
• Контролни копчиња: Navigation (Up/Down/Left/Right), OK/Enter, Type (Photo/Film), Size.
• Photo Input Slot: For scanning physical photos.
• Film Input Slot: For inserting film/slide holders.
• Слот за SD-картичка: For saving scanned images (SD card not included).
• USB порта: For connecting to a computer or power adapter.

5. Поставување

5.1. Поврзување за напојување

1. Connect the small end of the USB cable to the USB port on the scanner.
2. Connect the large end of the USB cable to the provided power adapter.
3. Приклучете го адаптерот за напојување во стандарден штекер.
4. Press the Power button to turn on the scanner.

5.2. Вметнување на SD картичка (опционално)

The scanner saves images to an SD card. If you wish to save scans, insert an SD card (up to 32GB, Class 10 recommended) into the SD card slot until it clicks into place. Ensure the card is formatted correctly (FAT32).

6. Ракување со скенерот

6.1. Scanning Photos

This scanner is designed to digitize physical photos, including those mounted in albums.

Слика 6.1: The scanner positioned over an open photo album, demonstrating its capability to scan a photo directly from the album without removal.

1. Проверете дали скенерот е вклучен.
2. Притиснете го ТИП button until "PHOTO" mode is selected on the display.
3. Carefully place the scanner over the photo you wish to scan. Ensure the photo is flat and well-lit.
4. Use the navigation buttons to adjust the scanning area if necessary.
5. Притиснете го OK button to initiate the scan. The scanned image will appear on the display.
6. За да ја зачувате сликата, притиснете го OK button again. The image will be saved to the inserted SD card.
7. You can adjust image settings (e.g., exposure, color balance) using the menu options before scanning. Refer to the on-screen menu for details.

6.2. Scanning Film and Slides

The scanner supports 35mm film strips and mounted slides.

1. Проверете дали скенерот е вклучен.
2. Притиснете го ТИП button until "FILM" mode is selected on the display.
3. Open the appropriate film or slide holder.
4. Carefully insert your 35mm film strip or mounted slide into the holder, ensuring it is correctly aligned.
5. Добро затворете го држачот.
6. Insert the loaded holder into the Film Input Slot on the side of the scanner.
7. Use the navigation buttons to preview and adjust the image on the display.
8. Притиснете го OK копче за да го започнете скенирањето.
9. За да ја зачувате сликата, притиснете го OK button again. The image will be saved to the inserted SD card.

7. Одржување

7.1. Чистење на скенерот

Regular cleaning ensures optimal scan quality.

• Надворешност: Wipe the exterior of the scanner with a soft, dry, lint-free cloth. Do not use abrasive cleaners or solvents.
• Photo Scanning Area: Gently wipe the glass surface in the photo scanning area with a microfiber cloth. For stubborn smudges, a small amount of lens cleaning solution can be applied to the cloth (not directly to the scanner).
• Film/Slide Input: Use the provided cleaning brush (or a soft, dry brush) to remove dust from the film input slot and film/slide holders. Avoid touching the internal optical components.
• Објектив: If dust is visible on the internal lens, use a can of compressed air (held upright) to gently blow away particles. Do not use excessive force.

Always ensure the scanner is powered off and unplugged before cleaning.

8 Смена на проблеми

Погледнете го овој дел за вообичаени проблеми и нивни решенија.

9. Спецификации

Technical specifications for the Reflecta Combo Album SCAN 64400 Scanner.

10. Гаранција и поддршка

Reflecta products are manufactured to high-quality standards. For information regarding warranty coverage, technical support, or service, please refer to the warranty card included with your product or visit the official Reflecta website. Please have your model number (64400) and purchase details available when contacting support.

Производител: Рефлекта