Hager SVN129 LED Pilot Light Instruction Manual

1. Вовед

This instruction manual provides essential information for the safe installation, operation, and maintenance of the Hager SVN129 LED Pilot Light. The SVN129 is a compact indicator designed for electrical panels and control systems, featuring red, green, and orange LED illumination and operating on a 230V AC supply.

Ве молиме внимателно прочитајте го ова упатство пред инсталацијата и зачувајте го за во иднина.

2. Информации за безбедност

ПРЕДУПРЕДУВАЊЕ: Electrical installation should only be performed by qualified and authorized personnel. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Секогаш исклучувајте го напојувањето на главниот прекинувач пред да го инсталирате или сервисирате уредот.
• Осигурајте се дека сите инсталации се во согласност со локалните и националните електрични кодови.
• Не го користете уредот ако изгледа оштетен.
• This device is designed for indoor use in dry locations unless otherwise specified.
• Потврдете го снабдувањето томtage matches the device's rated voltage (230V AC).

3. Производот завршиview

The Hager SVN129 is an LED pilot light designed for clear visual indication within electrical systems. Its key features include:

• LED осветлување: Provides bright red, green, and orange light for status indication.
• Voltage Оценка: Работи на 230V AC.
• Големина на модулот: Occupies 1 module space in a standard electrical panel.
• Фреквенција: Designed for 50/60 Hz systems.

Figure 1: Hager SVN129 LED Pilot Light. This image displays the front view of the SVN129 LED pilot light, highlighting its compact form factor suitable for integration into electrical panels. The indicator features a clear lens, designed to display red, green, or orange light depending on the operational status.

4. Поставување и инсталација

Installation of the Hager SVN129 LED Pilot Light should be carried out by a qualified electrician in accordance with all applicable electrical standards and regulations.

1. Исклучување на струја: Ensure the main power supply to the installation area is completely disconnected and secured against accidental re-connection.
2. Монтирање: The SVN129 is designed for DIN rail mounting. Snap the device onto the DIN rail in the desired position within the electrical enclosure.
3. Жици: Connect the 230V AC supply wires to the designated terminals on the pilot light. Refer to the wiring diagram on the device or packaging for correct polarity and connection points. Typically, these devices have two terminals for line and neutral connections.
4. Безбедни врски: Ensure all terminal screws are tightened securely to prevent loose connections, which can cause overheating or intermittent operation.
5. Верификација: Double-check all wiring connections before restoring power.
6. Враќање на енергија: Restore power to the circuit. The pilot light should illuminate according to the circuit status it is monitoring.

5. Упатства за работа

The Hager SVN129 LED Pilot Light operates as a visual indicator. Once correctly installed and connected to a 230V AC circuit, it will illuminate to indicate the status of that circuit or a specific condition within an electrical system.

• The specific color (red, green, or orange) displayed by the LED will depend on the model variant and the intended application for which it was selected.
• No user interaction is required for its operation beyond initial installation.

6. Одржување

The Hager SVN129 LED Pilot Light is designed for minimal maintenance. However, periodic checks can ensure continued reliable operation.

• Чистење: If necessary, gently wipe the surface of the pilot light with a soft, dry, or slightly damp крпа. Не користете абразивни средства за чистење или растворувачи.
• Инспекција: Periodically inspect the device for any signs of physical damage, discoloration, or loose connections. If any issues are found, disconnect power and consult a qualified electrician.
• Нема делови што може да ги сервисира корисникот: The LED pilot light contains no user-serviceable parts. Do not attempt to open or repair the unit.

7 Смена на проблеми

If the Hager SVN129 LED Pilot Light is not functioning as expected, consider the following troubleshooting steps:

• Светлината не осветлува:
  • Проверете дали напојувањето на колото е активно.
  • Verify that the pilot light is correctly wired and connections are secure.
  • Обезбедете снабдување voltage е 230V AC.
  • If the above steps do not resolve the issue, the device may be faulty and require replacement by a qualified electrician.
• Наизменична операција:
  • Check for loose wiring connections at the terminals.
  • Ensure stable power supply to the circuit.

For issues not covered here, contact a qualified electrician or Hager customer support.

8. Спецификации

9. Гаранција и поддршка

За информации во врска со условите за гаранција, ве молиме погледнете ја документацијата што ја приложивте со вашата нарачка или посетете ја официјалната страница на Hager. website. For technical support or inquiries, please contact Hager customer service through their official channels.

Забелешка: Спецификациите и изгледот на производот може да се променат без претходна најава.