JETBeam SF-R26 Rechargeable Flashlight User Manual

Вовед

The JETBeam SF-R26 is a high-performance, rechargeable LED flashlight designed for a wide range of lighting needs. Built with military-grade quality, it offers exceptional brightness and durability, making it suitable for various applications. This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your SF-R26 flashlight.

Figure 1: JETBeam SF-R26 Rechargeable Flashlight, showcasing неговиот компактен и робустен дизајн.

Информации за безбедност

• Безбедност на очите: Do not shine the flashlight directly into eyes. The powerful beam can cause temporary vision impairment or permanent eye damage.
• Топлина: The flashlight may become warm during prolonged use, especially on higher output modes. Handle with care.
• Безбедност на батеријата:
  • Use only recommended battery types (1x 18650 or 2x CR123A).
  • Не мешајте стари и нови батерии или различни типови на батерии.
  • Обезбедете правилен поларитет на батеријата за време на инсталацијата.
  • Не фрлајте ги батериите во оган. Може да експлодираат.
  • If the flashlight will not be used for an extended period, remove the batteries to prevent leakage.
• Отпорност на вода: While the SF-R26 is resistant to strong water jets, it is not designed for prolonged submersion. Ensure the USB port cover is securely closed when exposed to water.
• Деца: Да се ​​чува подалеку од дофат на деца.

Содржина на пакетот

По отварањето на пакувањето, проверете дали се вклучени сите од следниве ставки:

• JETBeam SF-R26 Flashlight
• Микро USB кабел за полнење
• 18650 Rechargeable Battery (if included with specific package)
• Ланјард
• Резервни О-прстени
• Упатство за употреба (овој документ)

Figure 2: Contents typically included with the JETBeam SF-R26 flashlight, including the flashlight, battery, USB cable, and accessories.

Поставување

1. Инсталација на батерија

The SF-R26 can be powered by one 18650 rechargeable Li-ion battery or two CR123A batteries. Ensure the battery is inserted with the positive (+) end facing towards the head of the flashlight.

1. Отшрафете го капачето на опашката на фенерчето.
2. Insert the battery(ies) according to the polarity markings. For 18650, the positive end goes towards the head. For CR123A, both positive ends go towards the head.
3. Цврсто завртете го задниот капак за да обезбедите правилен контакт и водоотпорност.

2. Charging (for 18650 battery)

The SF-R26 features a convenient micro USB charging port for internal recharging of an 18650 battery. CR123A batteries are NOT rechargeable via the flashlight's USB port.

1. Locate the micro USB charging port on the side of the flashlight. It is usually covered by a rubber flap.
2. Нежно подигнете го гумениот капак за да го откриете отворот.
3. Connect the micro USB cable to the flashlight's port and the other end to a USB power source (e.g., computer, wall adapter).
4. The side switch LED indicator will show charging status (e.g., red for charging, green for fully charged).
5. Откако ќе заврши полнењето, исклучете го кабелот и цврсто притиснете го гумениот капак назад на место за да ја одржите водоотпорноста.

Figure 3: The micro USB charging port on the side of the SF-R26, shown with a charging cable connected.

Упатства за работа

1. Power On/Off (Tail Switch)

The tactical tail cap switch controls the main power of the flashlight.

• Моментално вклучено: Half-press the tail switch to momentarily turn on the light. Release to turn off.
• Постојано вклучено/исклучено: Fully press the tail switch until it clicks to turn the light on or off.

Figure 4: The tactical tail switch of the SF-R26, used for power control.

2. Mode Selection (Side Switch)

With the flashlight turned on, use the side switch to cycle through different brightness levels and special modes.

• Нивоа на осветленост: Short press the side switch to cycle through the available brightness modes (e.g., Low, Medium, High, Turbo). The SF-R26 offers 3 dimming outputs (10 lumens, 250 lumens) and a maximum output of 1200 lumens.
• Режим на строб: Press and hold the side switch for approximately 1-2 seconds to activate the Strobe mode. Short press again to return to the previous brightness level.

Figure 5: The side switch of the SF-R26, used for cycling through brightness modes and activating strobe.

3. Индикатор за моќност

The side switch also functions as an LED power indicator. It will flash slowly and then quickly to indicate when the battery charge is low and needs replacement or recharging.

Одржување

• Чистење: Исчистете го телото на фенерчето со мека, дamp крпа. Не користете абразивни средства за чистење или растворувачи.
• Навои и О-прстени: Periodically lubricate the threads and O-rings with silicone grease to maintain water resistance and smooth operation. Replace O-rings if they appear damaged or worn.
• Нега на батеријата:
  • Чувајте ги батериите на ладно и суво место.
  • If using rechargeable 18650 batteries, recharge them regularly, even if not fully depleted, to prolong battery life.
  • Remove batteries from the flashlight if it will not be used for an extended period to prevent potential leakage and damage.

Решавање проблеми

Спецификации

Слика 6: Одблиску view of the CREE XP-L HI LED emitter, highlighting the light source.

Гаранција и поддршка

JETBeam products are manufactured to high quality standards. For specific warranty details, please refer to the warranty card included with your product or visit the official JETBeam website. If you encounter any issues or require technical assistance, please contact JETBeam customer support or your authorized dealer.

Производител: Sportsman Supply Inc.

Прво достапен датум: 24 февруари 2017 година