Lithonia Lighting BLT Series 2x4 LED Troffer Light Instruction Manual

1. Вовед

The Lithonia Lighting BLT Series 2x4 Low Profile LED Troffer is designed to provide efficient and uniform illumination for various indoor commercial applications. This manual outlines the necessary steps for safe installation, proper operation, and routine maintenance of your LED troffer light. Please read all instructions carefully before proceeding with installation or use.

2. Информации за безбедност

ПРЕДУПРЕДУВАЊЕ: Ризик од електричен удар. Исклучете го напојувањето пред инсталација или сервисирање.

• Сите жици треба да ги изврши квалификуван електричар во согласност со националните и локалните електрични прописи.
• Осигурајте се дека апаратот е правилно заземјен за да избегнете потенцијални електрични опасности.
• Do not alter or modify the fixture. Any modifications may void the warranty and create safety risks.
• Handle the fixture with care to prevent damage to electrical components or the diffuser.
• This fixture is intended for indoor use in damp-location rated and IC rated environments.

3. Содржина на пакетот

Проверете дали сите компоненти се присутни пред да започнете со инсталацијата:

• 1 x Lithonia Lighting BLT Series 2x4 LED Troffer Light
• Installation Hardware (Integral T-bar clips)

4. Спецификации

5. Инсталација

The BLT Series LED Troffer is designed for easy installation in standard drop ceilings. Its shallow 2-3/8" depth accommodates restrictive plenum settings.

1. Подгответе го просторот за инсталација: Ensure the power supply to the installation area is turned off at the circuit breaker. Clear any obstructions in the ceiling grid where the fixture will be installed.
2. Позиционирајте го уредот: Carefully lift the LED troffer into the ceiling grid opening. The end plates feature integral T-bar clips designed for secure attachment to the T-grid.
3. Обезбедете го тела: Engage the T-bar clips to firmly hold the luminaire in place within the ceiling grid.
4. Приклучоци за жици: Access the wiring compartment. Connect the fixture's electrical wires to the building's power supply wires (line, neutral, and ground) according to local electrical codes. For dimming functionality, connect the 0-10V dimming wires to a compatible dimming control system.
5. Close Wiring Compartment: Ensure all wiring connections are secure and properly insulated. Close the wiring compartment cover.
6. Вратете ја моќноста: Откако ќе заврши инсталацијата и ќе се потврдат сите врски, вратете го напојувањето на прекинувачот.

Видео за инсталација

Video 1: Official product video demonstrating the features and installation of the BLT Series Low Profile LED Drop in Ceiling Light.

6. Упатства за работа

The Lithonia Lighting BLT Series LED Troffer provides instant-on illumination upon power activation. For models equipped with dimming capabilities:

• Контрола на затемнување: This fixture is compatible with 0-10V dimming systems, allowing you to adjust the light output down to 10% of its full brightness. Connect the fixture to a compatible 0-10V dimmer switch (sold separately) for variable light control.
• Контрола за вклучување/исклучување: Use a standard wall switch to turn the light fixture on or off.

7. Одржување

The BLT Series LED Troffer Light is designed for minimal maintenance due to its long-life LED technology.

• Чистење: To maintain optimal light output and appearance, periodically clean the acrylic diffuser with a soft, damp cloth. Avoid using abrasive cleaners, solvents, or harsh chemicals, as these can damage the diffuser material.
• Нема делови што се сервисираат од страна на корисникот: The LED components and driver are integrated into the fixture. There are no user-serviceable parts inside. Do not attempt to open or repair the fixture, as this will void the warranty and could lead to electrical hazards.

8 Смена на проблеми

If you encounter issues with your LED troffer light, refer to the following common troubleshooting steps:

Ако проблемот продолжи откако ќе се обидете со овие решенија, контактирајте ја корисничката поддршка.

9. Гаранција и поддршка

This Lithonia Lighting BLT Series 2x4 LED Troffer Light is backed by a 5-year limited warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use.

For warranty claims, technical assistance, or any questions regarding your product, please contact Lithonia Lighting customer service. Keep your proof of purchase for warranty validation.

For more information, visit the official Lithonia Lighting website or refer to the product's packaging.