1. Вовед
Thank you for choosing the Grohe 13372000 S-shaped Tubular Spout. This manual provides essential information for the safe installation, operation, and maintenance of your new product. Please read these instructions carefully before beginning installation and keep them for future reference. Grohe products are designed with advanced technology and engineering, utilizing low-lead brass alloys to ensure durability against scratches and limescale, maintaining performance over time.
2. Производот завршиview
The Grohe 13372000 is a high-quality S-shaped tubular spout designed for various faucet applications. It features a durable Grohe StarLight Chrome finish, known for its resistance to tarnishing and scratches, ensuring a lasting pristine appearance. This product is manufactured in Germany, reflecting Grohe's commitment to quality and precision engineering. Its design allows for easy and quick installation.
Image 1: The Grohe 13372000 S-shaped Tubular Spout, showcasing its chrome finish and design.
3. Информации за безбедност
Ве молиме почитувајте ги следниве безбедносни мерки за време на инсталацијата и употребата:
- Секогаш исклучувајте го главниот довод на вода пред да се обидете со каква било инсталација или одржување.
- Носете соодветна лична заштитна опрема, како што се заштитни очила и ракавици.
- Осигурајте се дека сите врски се безбедни за да спречите протекување.
- Доколку не сте сигурни за кој било чекор, консултирајте се со квалификуван водоводџија.
- Do not use abrasive cleaners or harsh chemicals on the chrome finish, as this can damage the surface.
4. Поставување и инсталација
This section provides general guidelines for installing the Grohe 13372000 S-shaped Tubular Spout. Specific installation steps may vary depending on your existing faucet body and plumbing setup. Professional installation is recommended.
- Подгответе го просторот за инсталација: Turn off the main water supply to the faucet. Clear the area around the faucet for easy access.
- Remove Old Spout (if applicable): If replacing an existing spout, carefully remove it according to its manufacturer's instructions. Clean any residue from the faucet body.
- Проверете ги компонентите: Ensure all parts of the new spout are present and undamaged.
- Install the Spout: Carefully align the new Grohe spout with the faucet body. Depending on the design, it may twist on, slide into place, or require a retaining nut. Ensure any O-rings or gaskets are properly seated to create a watertight seal.
- Безбедни врски: Tighten any retaining nuts or screws by hand, then use a wrench for a final snug turn. Do not overtighten, as this can damage the spout or faucet body.
- Проверете го притисокот на водата: Ensure your water pressure is within acceptable limits for optimal performance.
Image 2: A pressure gauge, illustrating the importance of checking water pressure during plumbing installations.
5. Упатства за работа
The Grohe 13372000 S-shaped Tubular Spout is designed to deliver water efficiently. Its operation is dependent on the faucet body it is attached to. Generally, water flow is controlled by the faucet handles or lever. Ensure the spout is positioned correctly for your desired water delivery.
- To start water flow, operate your faucet's handle(s) as usual.
- Adjust water temperature and flow rate using your faucet's controls.
- Ensure the spout is clear of obstructions for optimal water stream.
6. Одржување
Proper maintenance will ensure the longevity and appearance of your Grohe spout.
- Чистење: Clean the spout regularly with a soft cloth and mild soap. Rinse thoroughly with clean water and dry with a soft cloth to prevent water spots.
- Избегнувајте груби средства за чистење: Do not use abrasive sponges, scouring pads, or cleaners containing alcohol, ammonia, bleach, or other harsh chemicals, as these can damage the Grohe StarLight chrome finish.
- Одржување на аераторот: If water flow becomes restricted, the aerator at the tip of the spout may be clogged. Unscrew the aerator, clean any debris or mineral deposits, and reattach it.
7 Смена на проблеми
If you encounter issues with your Grohe 13372000 S-shaped Tubular Spout, refer to the following common problems and solutions:
| Проблем | Можна причина | Решение |
|---|---|---|
| Water leaks from spout base | Loose connection, damaged O-ring/gasket | Tighten connection; inspect and replace O-rings/gaskets if damaged. |
| Низок проток на вода | Clogged aerator, low water pressure | Clean or replace aerator; check main water supply pressure. |
| Spout is loose | Mounting nut/screw is loose | Tighten the mounting nut or screw securing the spout to the faucet body. |
If the problem persists after attempting these solutions, please contact Grohe customer support or a qualified plumber.
8. Спецификации
- Број на модел: 13372000
- Производител: Грое
- Боја: Сребрена
- Димензии на производот (Д x Ш x В): 33 x 19 x 2.5 cm
- Тежина на производот: 380 грама
- Вклучени компоненти: Излив за славина
- Земја на потекло: Кина
9. Гаранција и поддршка
Grohe products are manufactured to the highest quality standards and come with a manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or visit the official Grohe website. For technical support, spare parts, or service inquiries, please contact Grohe customer service through their official channels.
Поддршка преку Интернет: Посетете www.grohe.com за информации за производот, често поставувани прашања и контакт информации.
