SEBSON Motion Detector and Chime Instruction Manual

1. Вовед

This manual provides essential information for the proper installation, operation, and maintenance of your SEBSON Motion Detector and Chime. Please read these instructions carefully before using the device to ensure safe and efficient performance. This device is designed to detect movement and provide an audible alert, functioning as both a motion alarm and a passage chime.

2. Информации за безбедност

• Ensure the device is installed in a dry environment, as it has an IP20 protection rating, meaning it is not protected against water.
• Не го изложувајте уредот на екстремни температури или директна сончева светлина.
• Да се ​​чува подалеку од дофат на деца.
• Only use the specified 9V E-Block battery type.
• Отстранете ги батериите одговорно во согласност со локалните прописи.

3. Содржина на пакетот

• 1 x SEBSON Motion Detector and Chime (Model BWM_ALARM_B)
• Монтажна заграда
• Хардвер за монтирање (завртки, ѕидни приклучоци)
• Note: 1x 9V E-Block battery is required and not included.

4. Производот завршиview

The SEBSON Motion Detector and Chime is a compact, battery-powered device designed for versatile use. It features a passive infrared (PIR) sensor to detect movement and offers two distinct audible alert modes: a chime for passage detection and an alarm for security purposes.

Слика 1: Предна страна view of the SEBSON Motion Detector and Chime.

Слика 2: Предна страна view of the device, highlighting the SEBSON brand logo.

Слика 3: Заден дел view of the motion detector, illustrating the integrated mounting bracket.

5. Поставување

5.1 Инсталација на батерија

1. Gently slide open the battery compartment cover located on the back of the device.
2. Insert one 9V E-Block battery, ensuring correct polarity (+/-).
3. Добро затворете го капакот на преградата за батерии.

5.2 Монтирање на уредот

The device can be mounted on a wall using the provided bracket and hardware.

1. Choose a suitable location for installation. Consider the desired detection area and ensure the sensor has an unobstructed view.
2. Detach the mounting bracket from the main unit if it is not already separate.
3. Mark the positions for drilling holes on the wall using the bracket as a template.
4. Дупчете ги дупките и вметнете ги ѕидните приклучоци.
5. Прицврстете го држачот за монтирање на ѕидот со помош на приложените завртки.
6. Attach the motion detector unit to the mounted bracket. The sensor housing can pivot 360 degrees within the bracket to adjust the detection angle.

Figure 4: Illustration of battery insertion and how the device attaches to the wall-mounted bracket.

6. Упатства за работа

6.1 Избор на режим

The device features a three-position switch for selecting the operating mode:

• ЧИМ: In this mode, the device emits a short chime sound when motion is detected. This is suitable for use as a passage detector in shops or offices.
• ИСКЛУЧЕНО: The device is turned off and will not detect motion or emit any sound.
• АЛАРМ: In this mode, the device emits a loud alarm sound (approximately 70dB) when motion is detected. This is suitable for security purposes.

Слика 5: Детално view of the mode selection switch (1: Chime, 2: Off, 3: Alarm).

6.2 Област за детекција

The motion detector has a detection range of up to 8 meters and a detection angle of 60 degrees. For optimal performance, position the device to cover the desired area without obstructions.

Figure 6: Diagram showing the detection range (8m) and angle (60°), along with the 360° rotational capability of the sensor head.

7. Одржување

7.1 Замена на батеријата

When the sound becomes weak or the device stops responding, it is time to replace the 9V E-Block battery. Follow the battery installation steps in Section 5.1.

7.2 Чистење

To clean the device, use a soft, dry cloth. Do not use abrasive cleaners or solvents, as these may damage the surface or internal components. Ensure no moisture enters the device.

8 Смена на проблеми

• Device not detecting motion:
  • Проверете дали батеријата е правилно инсталирана и има доволно моќност. Заменете ја доколку е потребно.
  • Ensure the device is not in the "OFF" position.
  • Verify that the detection area is clear of obstructions.
  • Adjust the angle of the sensor to cover the desired area.
• No sound or weak sound:
  • Заменете ја батеријата од 9V.
  • Ensure the device is not in the "OFF" position.
• Лажни аларми:
  • Reposition the device to avoid areas with rapid temperature changes (e.g., near heaters, air conditioners) or moving objects (e.g., curtains near a window).
  • Ensure the detection area is free from small animals if not intended to detect them.

9. Спецификации

10. Гаранција и поддршка

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official SEBSON webстраница. Зачувајте го доказот за купување за какви било гаранциски побарувања.