Прирачници+

AODELAN FT-8

AODELAN FT-8 Wireless Flash Trigger Transmitter and Receiver Instruction Manual

Модел: FT-8

1. Вовед

The AODELAN FT-8 Wireless Flash Trigger system allows for remote triggering of off-camera flash units and studio lights. Operating on a 2.4 GHz frequency, it provides a communication range of up to 200 meters (656 feet) without requiring line-of-sight. This system features 8 channels, enabling control of individual or multiple flash units simultaneously. It is compatible with most cameras equipped with a standard hot shoe mount and flashes with a 3.5mm port, including Canon, Nikon, Sony (metal hot shoe), Olympus, Panasonic, Pentax, Fuji, and Samsung cameras. The transmitter offers a 90-degree rotating adjustment for flexible positioning.

Видео: Надview of the AODELAN Flash Trigger Transmitter and Receiver, demonstrating its features and applications in a studio setting.

2. Содржина на пакетот

Проверете дали сите артикли наведени подолу се вклучени во вашиот пакет:

  • 1 x Предавател
  • 1 x Приемник
  • 1 x 3.5mm to 3.5mm Sync Cable
  • 1 x 3.5mm to PC Plug Cable
  • 1 x 1/4" Mono Plug Socket Adapter
  • 2 x решетки
  • 1 x торбичка за носење
  • 1 x Упатство за употреба (овој документ)
AODELAN FT-8 Wireless Flash Trigger Set package contents

Image: Contents of the AODELAN FT-8 Wireless Flash Trigger Set, including the transmitter, receiver, various cables, lanyards, and carrying pouch.

3. Компонента надview

3.1 Предавател

The transmitter unit mounts onto your camera's hot shoe. It sends the trigger signal to the receiver.

  • LED статус: Означува статус на напојување и сигнал.
  • Channel Numbers (1-8): Го прикажува избраниот канал.
  • Channel Adjustment Buttons: Used to change the operating channel.
  • Копче за тестирање: Manually triggers the flash for testing.
  • Swivel Rotator: Allows 90-degree rotation of the unit.
  • Прстен за заклучување: Secures the transmitter to the camera hot shoe.
  • Camera Hot Shoe Connection: Connects to the camera.
  • Прекинувач: Го вклучува/исклучува уредот.
  • Battery Compartment/Cover: Сместува АА батерии.
Diagram of AODELAN FT-8 Transmitter with labeled parts

Image: Detailed diagram illustrating the various parts and controls of the AODELAN FT-8 Transmitter.

3.2 Приемник

The receiver unit attaches to your flash or studio light and receives the trigger signal from the transmitter.

  • LED статус: Означува статус на напојување и сигнал.
  • Врска со топла чевли: За монтирање на блиц.
  • Пристаниште за DC напојување: For external power (if applicable, not typically used for AA battery models).
  • Прекинувач: Го вклучува/исклучува уредот.
  • Прстен за заклучување: Secures the receiver to a light stand or flash.
  • Cold Shoe & 1/4"-20 Tripod Lug: Provides mounting options.
  • Channel Numbers (1-8): Го прикажува избраниот канал.
  • Излезна порта 3.5 мм: For connecting to studio lights via sync cable.
  • Channel Adjustment Buttons: Used to change the operating channel.
  • Battery Compartment/Cover: Сместува АА батерии.
Diagram of AODELAN FT-8 Receiver with labeled parts

Image: Detailed diagram illustrating the various parts and connections of the AODELAN FT-8 Receiver.

4. Поставување

4.1 Инсталација на батерија

Both the transmitter and receiver require 2 AA batteries each. Open the battery compartment cover, insert the batteries according to the polarity markings, and close the cover securely.

4.2 Connecting the Transmitter to your Camera

  1. Slide the transmitter onto your camera's hot shoe.
  2. Tighten the locking ring on the transmitter to secure it in place.
  3. Turn on the transmitter using the power switch. The Status LED will illuminate.
AODELAN FT-8 Transmitter mounted on a camera hot shoe, with a flash firing

Image: The AODELAN FT-8 Transmitter mounted on a camera's hot shoe, illustrating its connection and a flash firing in the background, highlighting the effective transmission distance.

4.3 Connecting the Receiver to your Flash/Studio Light

The receiver can be connected to a flash unit in two ways:

  1. Via Hot Shoe: Slide your hot shoe compatible flash unit onto the receiver's hot shoe. Ensure it is securely mounted.
  2. Via Sync Cable: For studio lights or flashes with a 3.5mm sync port, connect one end of the provided 3.5mm to 3.5mm sync cable to the receiver's 3.5mm output port and the other end to the flash/studio light's sync input. If your studio light has a 1/4" mono plug socket, use the included 3.5mm to PC plug cable and the 1/4" mono plug socket adapter.
AODELAN FT-8 Receiver connection methods: on-camera flash and wired studio light

Image: Illustration showing two ways to connect the AODELAN FT-8 Receiver: directly to a flash on a camera's hot shoe (with the receiver acting as a pass-through or on-camera trigger) and via a sync cable to a studio light.

AODELAN FT-8 Receiver connected to a studio light using a 3.5mm to 6.3mm adapter

Image: Diagram showing the AODELAN FT-8 receiver connected to a studio light via a sync cable and a 3.5mm to 6.3mm adapter, illustrating the wired connection method for studio lights.

Turn on the receiver using its power switch. The Status LED will illuminate.

5. Упатства за работа

5.1 Избор на канал

Both the transmitter and receiver must be set to the same channel for proper communication. Use the Channel Adjustment Buttons on both units to select a channel from 1 to 8. The selected channel number will be displayed on the unit.

5.2 Testing the Connection

After setting the channels, press the Test Button on the transmitter. The connected flash unit(s) should fire. If they do not, recheck battery installation, power switches, and channel settings.

5.3 Flash Synchronization

The AODELAN FT-8 supports a maximum flash sync speed of 1/250s. Ensure your camera's shutter speed is set to 1/250s or slower for proper synchronization with the flash.

6. Одржување

  • Чистење: Користете мека, сува крпа за чистење на уредите. Не користете течни средства за чистење или растворувачи.
  • Замена на батерија: Replace batteries when the Status LED indicates low power or when the units fail to operate reliably. Remove batteries if the units will not be used for an extended period.
  • Складирање: Чувајте ги уредите на ладно и суво место, подалеку од директна сончева светлина и екстремни температури.

7 Смена на проблеми

ПроблемМожна причинаРешение
Блицот не свети
  • Units are off.
  • Слаби или празни батерии.
  • Different channels selected.
  • Improper connection to camera/flash.
  • Camera shutter speed too fast.
  • Вклучете ги и предавателот и приемникот.
  • Заменете ги батериите.
  • Set both units to the same channel.
  • Ensure secure connections.
  • Set camera shutter speed to 1/250s or slower.
Intermittent firing
  • Пречки од други уреди.
  • Единиците се премногу оддалечени една од друга.
  • Ниски батерии.
  • Префрлете се на друг канал.
  • Намалете го растојанието помеѓу единиците.
  • Заменете ги батериите.
Flash not syncing properly
  • Camera shutter speed too fast.
  • Set camera shutter speed to 1/250s or slower.

8. Спецификации

  • Модел: FT-8
  • Фреквенција: 2.4 GHz
  • Канали: 8
  • Опсег на комуникација: До 200 метри (656 стапки)
  • Max Sync Speed: 1/250 сек
  • Извор на енергија: 2 x AA batteries (for each unit)
  • Димензии на производот: 1.61 x 3.5 x 1.61 инчи (приближно, за една единица)
  • Тежина на ставката: 9.9 ounces (total for set, approximate)
  • Компатибилни монтажи: Universal Hot Shoe (for transmitter), Hot Shoe & 3.5mm Sync Port (for receiver)
  • Компатибилни камери: Canon, Nikon, Sony (Metal Hot shoe), Olympus, Panasonic, Pentax, Fuji, Samsung

9. Гаранција и поддршка

AODELAN products are designed for reliability and performance. For warranty information, technical support, or service inquiries, please refer to the contact details provided on the product packaging or the official AODELAN webстраница. Ве молиме задржете го доказот за купување за гаранциски барања.

For further assistance, you may visit the AODELAN store on Amazon: AODELAN Store

Поврзани документи - FT-8

Предview AODELAN BR-E1A Wireless Remote Control User Manual
User manual for the AODELAN BR-E1A Wireless Remote Control, detailing its features, setup, operation for still photos and movies, compatibility with Canon cameras, and specifications. Includes safety precautions and regulatory information.
Предview AODELAN BR-E1A Wireless Remote Control User Manual | Features & Specifications
Comprehensive user manual for the AODELAN BR-E1A Wireless Remote Control. Learn about its features, setup, shooting modes, safety precautions, and specifications. Compatible with Canon cameras.
Предview Aodelan PEBBLE Wireless Shutter Remote User Manual
This user manual provides instructions for the Aodelan PEBBLE Wireless Shutter Remote, covering its features, operation, troubleshooting, and warranty information. It details how to use the transmitter and receiver for various shooting modes including autofocus, single shot, continuous release, and Bulb shooting, as well as its functionality as a wired remote.
Предview Упатство за употреба на далечинскиот управувач AODELAN ZC-4
User manual for the AODELAN ZC-4 Remote Controller and Receiver, detailing wireless and wired operation for Sony camcorders, multi-cam control, and key features for professional video production.
Предview Упатство за употреба на далечинскиот управувач AODELAN ZC-3
User manual for the AODELAN ZC-3 Remote Controller, detailing installation, operation, features, and specifications for wireless and wired control of compatible Sony and Canon camcorders.
Предview AODELAN WTR-2 TRS-1 Wireless Timer Remote Shutter Release User Manual
Comprehensive user manual for the AODELAN WTR-2 and TRS-1 wireless and wired timer remote shutter release systems. Learn about features, setup, operation, safety, and technical specifications for photographers.